The edelkrone DollyONE is a portable robotic dolly that allows both linear and circular motorized camera moves on flat interior surfaces. It has a load capacity of 15 pounds. No track or measuring is required. The DollyONE is well suited for table-top or low-angle shots where you need the camera to be just a few inches above the surface.

You control the DollyONE via a Bluetooth app that also supports either the HeadONE or HeadPLUS. The edelkrone app is available for both iOS and Android and allows you to create linear or circular paths with keyframe points that you can manually control, or you can program the DollyONE to move in a loop between two points. You can also adjust the motion speed and your camera's shooting frame rate to create time-lapse videos. The DollyONE is powered by a separately available LP-E6 battery and comes with an LP-E6 battery plate.

Motion Control Table-Top Camera Platform    For Flat Indoor Surfaces    Supports HeadONE and HeadPLUS    Supports up to 15 Pounds    Automatically Calibrates to Center    Controlled via Bluetooth    Programmable for Motion Time-Lapse    Requires One LP-E6 Battery

Linear Movement:

• The default setting for the DollyONE is a straight slide. This allows you to either track side to side or dolly in/out on the lens. You can program multiple points along the straight-line path and move to any of those points or have the DollyONE loop between any two points.

• Using the easy path creation wizard enables you to create a circular path around any target you choose, with no measuring tools required. You can select several points on the curved path and make DollyONE go to any of them; and as with the linear movement, you can have it loop between any two points.

The edelkrone app scans the available devices in its surroundings and pairs with them automatically, giving you a single screen to control all devices simultaneously. It is available for both iOS and Android.

The app allows you to create time-lapse videos. You can have a simple transition between two key points or you can convert a recorded complex camera motion into a time-lapse with a single button. edelkrone's unique Dynamic Interval and Dynamic Step Size technologies allow you to adjust the time and camera speed independently of each other.

All edelkrone motorized products use the same backlash-free gear design technology for perfectly repeatable, smooth motion for even the most demanding shots.

All edelkrone motorized devices have a unique silent stepper motor technology that combines ultra-precise stepper motor positioning with ultra-silent operation. Stepper motors are perfect for precise motion control but tend to be noisy. edelkrone motorized devices provide near-silent operation so as not to interfere with dialog or interviews.

The DollyONE is designed to wirelessly connect to the HeadONE or HeadPLUS, providing a motorized head which enables 4-axis camera motion that can be easily programmed and repeated. The devices pair instantly in the background and you still use the same app to control all devices together.

Powers from a single LP-E6 battery (not included).

Related Questions and Answers

Q: 1. does this work with head plus pro? or is it just for head one? Also, whats the camera load capacity when I use those heads?

A: This is compatible with both the HeadPLUS and HeadONE units. This has an 11 pound payload capacity. How much of a camera you can put on it will depend on the weight of the Head unit you use.

Q: 2. Can a sequence to be executed on the Jib or any Edelkrone motorized device be triggered by an external device or software?

A: At this time Edelkrone products can only be controlled by Edelkrone software or devices. You can control Edelkrone products from Android or IOS Tablets and Smartphones using the Edekrone app or you can control them using the Edelkrone Controller.

Q: 3. No battery?? For more than $600 they could've included a battery. Am I missing something?

A: no those this item does not come with a battery

Q: 4. Does the laser module + head plus work together with dollyone? (Like it does with the laser+head plus+slider.)

A: there is no mention of the laser module working with the edelkrone DollyONE from the manufacturer

Q: 5. Does this work with Dolly Plus too?

A: They list this as compatible with the HeadPLUS and HeadONE, not the Dolly Plus.

Q: 6. (I forgot to add this into my other question, sorry for that!) Can you switch from horizontal shooting to vertical shooting with the pro? I do runway shows and need to be able to switch between the two quickly.

A: The edelkrone FlexTILT PRO unfortunately does not include a vertical shooting mode.

Q: 7. Just to clarify, for the vertical jib motion, 140 Seconds is the longest it can take? Not long enough for most timelapse applications.

A: That spec only applies to continuous movement. Time-lapses are not performed in a continuous move instead the jib will only move in between shots. Therefore when set up for time-lapses you can take virtually as long as you want to travel vertically or horizontally as long as the Jib-One has power.

Q: 8. which power supply do you need to buy to get it to run off of AC power?

A: To ensure that power is regulated you would use a power supply such as the Bescor PSA12421 AC Power Kit for Devices with 2.1mm Barrel Power - https://bhpho.to/35S5xA4

Q: 9. Will this work well with RED DSMC2 cameras?

A: The Edelkrone HeadPLUS PRO Pan and Tilt Head supports a maximum equipment load of 20 lbs. The RED DSMC2 can be configured to be pretty light weight for use with the system.

Q: 10. All these prosumer stabilizers/sliders/cranes/heads are using an app these days for remote control. Do they know it's possible to have more than one camera or combine different pieces of equipment? Why is it not MIDI or something more standard? What do you do when you have multiple pieces of equipment and want to pre-program a coordinated motion control?

A: This is the situation at this time. In time it may change.