Use this Wooden Camera LPL to Sony E-Mount Adapter to adapt the E Mount on your Sony full-frame Alpha series camera to accept cine-style LPL lenses such as the Signature LPL Primes. The integrated 1/4"-20 support foot serves as stress relief, transferring the weight of the lens away from the mount and onto your tripod or WC baseplate. This adapter includes a set of color-coded, stackable shims for adjusting your flange focal distance if your camera is out of calibration. The included LPL lens port cap will help keep your camera's sensor dust-free when no lens is attached to the mount.

Adapts LPL Mount Lens to Sony E Mount    For Sony Full-Frame Alpha Cameras    1/4"-20 Threaded Support Foot    7 Color-Coded Shims Included    Includes PL Lens Port Cap

The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color-coded shims of various thicknesses. Back focus should be checked using collimation tools or a wide lens focused on infinity. The shim kit includes:

• Silver: 0.0005"
• Amber: 0.001"
• Purple: 0.0015"
• Red: 0.002"
• Green: 0.003"
• Tan: 0.004"
• Blue: 0.005"

Related Questions and Answers

Q: 1. Is this compatible with the FX6 at all?

A: Yes, you will need a Sony BP-U35 battery to connect the DC cable.

Q: 2. I'm planning to use a cp2 kit (pl mount) with an a7s2 to shoot on full frame. Is that possible with this adapter?

A: Nandan, Yes, our E-Mount to PL Mount is compatible with the Zeiss CP.2s. Let us know if you have any additional questions.

Q: 3. Will this work with the Sony A7S?

A: This will mount to a a7s since that camera has a E mount. You would have to support the lens to the tripod and then mount the camera to the lens for the E mount of the a7s will not be strong enough to hold many PL mount lenses. Your next consideration is whether the PL mount lens will cover the a7s's Full Frame. PL mount lenses traditionally were only required to cover the Super35/APS-C frame. Lenses longer than 35mm should be no problem. Under 35mm you may experience vignetting.

Q: 4. Just confirming this will provide FF PL coverage to a FF Sony sensor?

A: yes this will cover a vista Vision size sensor

Q: 5. Is this the same model that was used for the Sony FS7?

A: The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 is only designed to work with the Sony FX9.

Q: 6. What are the sizes of the two screws that secure the slide to the camera?

A: The screws that would be used to secure the Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) (B&H# WO283000) to the FX6 body appear to be M4 (i.e. 4mm metric) ones. The easiest way to tell that is to see if a standard 1/4" screw (used for mounting just about every type of non enormous camera to a tripod or quick release plate) is about the right size but doesn't thread properly after a couple of turns into the thread. (That should only be done very gently.) If so, that tap is indeed an M4 female thread. If the 1/4" screw is too large to fit in the tap at all then it's an M3 screw.

Q: 7. Does the battery indicator in viewfinder work with this V-mount adapter?

A: no it will not work with the battery indicator because it is being powered through the AC port. It will give you the low voltage warning

Q: 8. When the V-mount battery dies during a take, the power sauce will be swapped to the BP-U battery seamlessly if it's in place?

A: The Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) acts as an AC adapter when in use and you cannot use BP-U batteries to hot-swap. For hot-swapping VMount batteries a sharkfin adapter is your best option.

Q: 9. work with CP.3 Zeiss and FX6 sony ? les me know please

A: While the actual lens mount adapter section of the Wooden Camera PL to Sony E Mount Pro Adapter (B&H# WO233400) will allow for the E mount of the Sony FX6 Full-Frame Cinema Camera (Body Only) (B&H# SOFX6) to adapt and thereby accept the PL bayonet of a PL mount version of a Zeiss CP.3 cine lens, the cheeseplate to which it is attached as a means of support will not reach the tripod mounting threads of the FX6 camera as it was designed for smaller hybrid cameras. In other words, it could be used but you would need to provide a great deal of lens support.

Q: 10. what base plate or rig do i need to use this on fx6?

A: You really have a ton of options. A good baseplate for example could something like these as an example. https://www.bhphotovideo.com/c/product/1248731-REG/wooden_camera_wc_222200_unified_baseplate_ursa_mini.html https://www.bhphotovideo.com/c/product/1622261-REG/shape_fx6rod_camera_cage_and_15mm.html