The Ferrofish Pulse16 MX is a 1 RU rackmount 16-channel AD/DA converter offering analog, MADI, and ADAT I/O, for tracking and mixing engineers in recording studios, houses of worship, broadcast trucks, and concert venues. With 24-bit / 192 kHz Cirrus Logic converters, a TCXO internal clock, and an active jitter-elimination circuit, it delivers accurate high-resolution audio. Interface a variety of equipment via the 16 balanced 1/4" TRS inputs/outputs, four ADAT optical inputs/outputs, and optical MADI I/O. The front-panel 1/4" headphone output features digitally controlled volume and an assignable mono or stereo source.

BNC jacks provide wordclock I/O for proper synchronization with other digital equipment such as master-clock generators, additional converters, and digital consoles. Remote control of the Pulse16 MX is possible through the MIDI 5-pin ports, which also support MIDI-over-MADI embedding and extracting. Display and modification of device settings, meters, and routing are achieved via the dual color TFT screens and three front-panel controls. The Pulse16 MX includes an external power supply and a MADI cable.

24-Bit / 192 kHz Cirrus Logic Converters    16 x Balanced 1/4" TRS (Inputs/Outputs)    4 x ADAT Optical (Inputs/Outputs)    Optical MADI I/O    1/4" Headphone Output    Wordclock and MIDI I/O    Dual-Color TFT Screens    Active Jitter-Elimination Circuit    Precise Digital Level Control    Includes Power Supply and MADI Cable

High-resolution Cirrus Logic A/D-D/A converters operate at up to 24-bits / 192 kHz

TCXO (temperature-compensated oscillator) internal clock and active jitter reduction provide reliable clock stability

BNC wordclock I/O for synchronization with other digital equipment

16 balanced analog inputs/outputs on 1/4" TRS jacks

Optical MADI I/O allows up to 64 channels of digital input and output

Singlemode or multimode operation via SFP module

Four TOSLINK optical inputs/outputs for up to 32 channels of ADAT I/O

Remote control via MIDI 5-pin I/O

Easy setup via dual color TFT screens and front-panel knob and buttons

Intuitive routing matrix

Digitally adjustable input and output levels in 1 dB steps

Convenient signal monitoring via front-panel 1/4" headphone output

Fanless design

Occupies 1 RU of rack space

Related Questions and Answers

Q: 1. How many rack spaces is this unit

A: Design: 3U Rackmount chassis Dimensions: Height: 5.25" Depth: 6.25" Width: 19" Weight: 8.9lbs

Q: 2. Can you mount in a vertical rack? I'm retrofitting an old console stereo and want to include CD.

A: CD player needs to be horizontal for proper use.

Q: 3. Will this work with a Samsung S21 Plus?

A: Yes. The unit supports mobile phones up to 3.5" Wide.

Q: 4. Will this trigger more than one flash unit or do two receivers need to be purchased?

A: A receiver for each flash/strobe needs to be purchased.

Q: 5. Can you increase the iPhone’s video bit rate settings in the app, as you can with the FilmicPro app, to get the best possible video quality?

A: The Moza Genie app supports control of " focus, zoom, view photos, slow-motion time-lapse, panoramas, change ISO, shutter, EV, and white balance." No mention of bit rate.

Q: 6. Is there a RCA jack for turntable?

A: No, the CD200BT only has RCA outputs. The Aux input is a 3.5mm jack designed for inputting devices (i.e. phones, computers, iPads, etc.) using the devices headphone output. For a turntable, you need a receiver that has a turntable input (this has a special preamp for the turntable) or an external turntable preamp that will then allow you to plug into any receiver that does not have a dedicated turntable input.

Q: 7. Does this fit on a panasonic fz1000 since its a 62mm filter thread ?

A: The lens fits perfectly on the 62mmm filter thread of my Sony FDR-AX100.It might as well fit in a panasonic with the same filter thread.

Q: 8. Can I use this device's digital output to play a CD into iTunes on my computer?

A: No, the digital outputs are intended to connect to a receiver or integrated amp.

Q: 9. How many Bluetooth devices can be paired?

A: 1 at a time.

Q: 10. Do i need to get an A/V receiver (or amplifier) to use this product?

A: The TASCAM CD-200BT has both analog (RCA) and digital (Coaxial & optical) outputs, which can be connected directly to compatible audio equipment. An amplifier would only be necessary if you wish to connect it to speakers that require a power amp.