The V-555.0-5MP-VIS-IR 1/2 CS-Mount 5.0mm Fixed Lens from Marshall Electronics is designed for use with 5MP cameras that have a 1/2" sensor. This lens features a 5.0mm focal length that delivers a 99.4° diagonal field of view. It is IR corrected and has a fixed iris.

Compatible with 5MP Cameras    CS Mount    Compatible with 1/2" Sensors    5.0mm Focal Length    IR Corrected    99.4° Diagonal Field of View    Fixed Iris Operation

IR corrected

Anodized aluminum housing

f/2.0 aperture

Eight elements and eight components glass construction

SLAR coating on all eight elements (reflectivity <1%, 400 to 700nm)

6.2mm back focal length (±5%, in air)

Image circle diameter ≥8mm

<-34% optical distortion

63% relative illumination

486.1 to 656.3 / 780, 850nm visible and IR wavelengths

Related Questions and Answers

Q: 1. Glass elements in a pinhole lens? What does that even mean?

A: The Marshall lenses have glass elements for consistent low distortion video. The front element of this lens is about 3 mm in diameter, easily hidden from view. The lens is 4" in length.

Q: 2. Will this fit a PXW-FS5? I need a light weight, wide lens for use on the FS5 while on the DJI Ronin M.

A: Hi Patrck ,I use it for my PXW FS 7. I am not really sure, but I think it will also fit for FS 5.

Q: 3. I have a question for anybody who uses this lens with E-m10 or E-m10 II. When using the camera built-in flash do you get a shade at the bottom of the picture if let's say the subject is 5 feet away? If yes, how much of the picture does it cover: 10%, 20%, 30%? I use the following trick for flash photos: I take the shot with 4:3 format and crop the pic to 3:2 format and remove the bottom shaded part.

A: you are getting a shade because the flash is being partially hidden by the lens hood. this is common with wide angle lens hoods

Q: 4. how does this compare How does this compare to the Rokinon 14mm f/2.8 for astrophotography?

A: This is formatted for a Nikon DX sensor, so it would not be as wide as using a Rokinon 14mm. However both can be used for astrophotography.

Q: 5. Will this lens work on Canon RP?

A: No, the Rokinon 12mm f/2.0 NCS CS Lens for Canon EF-M Mount (Black) is not compatible for use with the Canon EOS RP Mirrorless Camera. The Rokinon 12mm f/2.0 NCS CS Lens listed above uses the Canon EF-M lens mount for their APS-C sensor mirrorless digital cameras, whereas the Canon EOS RP Mirrorless Camera is a full-frame camera that uses the Canon RF-mount lens mount. There are no lens mount adapters designed to connect the smaller EF-M mount lens onto the larger RF-mount lens mount.

Q: 6. how is this lens for indoor real estate photography in tight spots is there a lot of barrel distortion?

A: This lens is designed for Nikon camera with an APS-C sized sensor. So if you are using such a camera you will get great results with lens.

Q: 7. Is it compatible with X-T200 camera body and EF-S 24mm f2.8 STM, nifty fifity and EF-S 55-250?

A: This Commlite adapter is compatible with the X-T200 and all three of those EF lenses.

Q: 8. Is it compatible with a canon 60D?

A: I cannot help as my lens was on Fuji X mount.

Q: 9. Will this work with Sony a55? It's an a-mount. If not, what lens is the equivalent for the Sony a55?

A: no e-mount and a-mount (aka alpha mount) are not compatible.Here are similar products for alpha mount:Rokinon 16mm f/2.0 ED AS UMC CS Lens for Sony Alpha APS-C MountRokinon 10mm T3.1 Cine DS Lens with Sony Alpha Mount for APS-C

Q: 10. I'm seeing conflicting reports ... Will this lens work on a Nikon D5000 DX? Wanting it for night/astrophotography. Thank you!

A: Yes, Rokinon 16mm f/2.0 ED AS UMC CS for Nikon F Mount is fully compatible with Nikon DSLRs with APS-C sized image format such as your Nikon D5000. The lens is manual focus only therefore you will need to set your camera to manual mode (M), operate the aperture on the lens, and control the shutter speed and ISO on the camera.