The Atlas Sound 240-18 is cabinet that fits 40 RU of rackmount gear in a vertical orientation. The cabinet is constructed out of 16-gauge cold-rolled steel and includes the base, side panels, top panel, 11-gauge mounting rails, and a removable rear door. The door can be oriented for right- or left-hand opening, and it sports a cylinder lock and a flush door pull handle. With an expanded 6-RU opening in the top and bottom, you maintain wire access or ventilation. You can also close these openings with vented or solid panels. This rack is 18.5" deep. A 3-RU blank panel is included.

Cold-Rolled Steel Construction    Open Top & Bottom for Wiring Access    Included 11-Gauge Mounting Rails    Included Rear Door    Cylinder Lock & Flush Door Pull Handle    3-RU Blank Panel Included    18.5" Deep

Rack rails are precision tapped at 10-32, and recessed 17.5mm. These plated rails include convenient RU indicator hash marks to aid in equipment alignment. Rails are standard E.I.A. 5/8"-5/8"-1/2" spacing.

Conduit arrays are located on the top and bottom surface panels as well as the top and bottom back flanges. Flange arrays consist of five knockouts (three 1" standard, and two 0.5 x 0.75" concentric). Surface arrays are comprised of 4 knockouts (two, 1" standard knockouts and two 0.5 x 0.75" concentric).

Related Questions and Answers

Q: 1. Will it fit a nikon d7500 plus a tamron 100-400?

A: The f-stop Navin Welded Camera Pouch is a touch too small for the D7500 with the Tamron 100-400mm f/4.5-6.3 Di VC USD Lens.

Q: 2. Will this bag hold a Sony A7R4 camera with a Sigma 100-400 mm zoom lens attached? Would the lens hood need to be detached?

A: Yes, the f-stop Navin Welded Camera Pouch holds the Sony A7R IV with the Sigma 100 - 400 mm lens + hood attached.

Q: 3. What are the minimum and maximum dimensions of this bag? Would it fit a Would this fit a Nikon Z with a z 24-50mm f4.5-6.3?

A: The f-stop Navin Welded Camera Pouch interior is 13" long and 6.5" wide at the top.

Q: 4. Has anyone tried using this pouch to carry two smaller lenses? One at the bottom of the pouch, then a small divider, and another small lens attached to the body? I am looking for a chest pack for a Z6 with a 24-120 f/4 and a 14-30 f/4. Thanks.

A: For this you may want to wrap the second lens with something like the Domke 15x15" Color Coded Protective Wrap (Blue) BH #DOPW15BL • MFR #722-15U or you could use it as a divider as you mention.

Q: 5. Will this work for type A? does owc make a type A card reader?

A: The OWC Atlas CFexpress 4.0 Type B card reader will not work with CFexpress Type A. OWC does not make a Type A reader.

Q: 6. Can I use my Nikon 850?

A: Yes, the OWC 325GB Atlas Ultra CFexpress Type B Memory Card is compatible with the Nikon D850 if you have the latest firmware update on the camera.

Q: 7. It seems like this may have been answered, but would it fit a mirrorless (Z7) with the 70-200 with lens hood?

A: It will fit but you will have to turn the foot to the side and the lens hood must be reversed. It's tight even after doing those steps. We recommend the Lowepro ProTactic TLZ 75 AW Convertible Camera Bag https://bhpho.to/3H3iEjN . You'll just have to reverse the lens hood to put it in the bag.

Q: 8. Can I use this with my OM1 Olympus camera?

A: This card is not compatible with the Olympus OM1

Q: 9. Does it work fully compatible with x-h2s?

A: Yes, the following system adapts to the following memory cards. Slot 1: CFexpress Type B Slot 2: SD/SDHC/SDXC (UHS-II)

Q: 10. Can this hold the Sigma 150-600mm C and a Fuji X-T2 with adapter and battery grip?

A: The f-stop Navin Welded Camera Pouch is not big enough to hold your gear.