The Atlas Sound 240-18 is cabinet that fits 40 RU of rackmount gear in a vertical orientation. The cabinet is constructed out of 16-gauge cold-rolled steel and includes the base, side panels, top panel, 11-gauge mounting rails, and a removable rear door. The door can be oriented for right- or left-hand opening, and it sports a cylinder lock and a flush door pull handle. With an expanded 6-RU opening in the top and bottom, you maintain wire access or ventilation. You can also close these openings with vented or solid panels. This rack is 30.0" deep. A 3-RU blank panel is included.

Cold-Rolled Steel Construction    Open Top & Bottom for Wiring Access    Included 11-Gauge Mounting Rails    Included Rear Door    Cylinder Lock & Flush Door Pull Handle    3-RU Blank Panel Included    30.0" Deep

Rack rails are precision tapped at 10-32, and recessed 17.5mm. These plated rails include convenient RU indicator hash marks to aid in equipment alignment. Rails are standard E.I.A. 5/8"-5/8"-1/2" spacing.

Conduit arrays are located on the top and bottom surface panels as well as the top and bottom back flanges. Flange arrays consist of five knockouts (three 1" standard, and two 0.5 x 0.75" concentric). Surface arrays are comprised of 4 knockouts (two, 1" standard knockouts and two 0.5 x 0.75" concentric).

Related Questions and Answers

Q: 1. Can I use this with my OM1 Olympus camera?

A: This card is not compatible with the Olympus OM1

Q: 2. Can this hold the Sigma 150-600mm C and a Fuji X-T2 with adapter and battery grip?

A: The f-stop Navin Welded Camera Pouch is not big enough to hold your gear.

Q: 3. Can I use my Nikon 850?

A: Yes, the OWC 325GB Atlas Ultra CFexpress Type B Memory Card is compatible with the Nikon D850 if you have the latest firmware update on the camera.

Q: 4. Does it work on the Sony FS7?

A: The OWC 128GB Atlas Pro CFexpress Type B Memory Card is just that, a CFexpress card. Since the Sony PXW-FS7 XDCAM can only take the very similar but not the same XQD card, it cannot use any CFexpress Type B card.

Q: 5. Does it work fully compatible with x-h2s?

A: Yes, the following system adapts to the following memory cards. Slot 1: CFexpress Type B Slot 2: SD/SDHC/SDXC (UHS-II)

Q: 6. It seems like this may have been answered, but would it fit a mirrorless (Z7) with the 70-200 with lens hood?

A: It will fit but you will have to turn the foot to the side and the lens hood must be reversed. It's tight even after doing those steps. We recommend the Lowepro ProTactic TLZ 75 AW Convertible Camera Bag https://bhpho.to/3H3iEjN . You'll just have to reverse the lens hood to put it in the bag.

Q: 7. What are the minimum and maximum dimensions of this bag? Would it fit a Would this fit a Nikon Z with a z 24-50mm f4.5-6.3?

A: The f-stop Navin Welded Camera Pouch interior is 13" long and 6.5" wide at the top.

Q: 8. will Nikon Z8 with 70-200 Z series lens with TC-2X teleconverter attached fits in this pouch?

A: The Nikon Z8 Mirrorless Camera with the Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens and the Nikon Z Teleconverter TC-2x attached fits in the f-stop Navin Welded Camera Pouch.

Q: 9. What are the TBW specifications for these cards? Their performance and pricing is otherwise spectacular.

A: OWC 2TB Atlas Pro CFexpress Type B Memory Card endurance is 1600TB total bytes written (TBW), equal to 877 GB per day for 5 years.

Q: 10. Will this reader also work with XQD cards?

A: The OWC Atlas CFexpress 4.0 Type B Card Reader will not read XQD cards. You can use this Sony XQD reader instead: https://bhpho.to/38KpHNv