The Atlas Sound 244-18 is cabinet that fits 44 RU of rackmount gear in a vertical orientation. The cabinet is constructed out of 16-gauge cold-rolled steel and includes the base, side panels, top panel, 11-gauge mounting rails, and a removable rear door. The door can be oriented for right- or left-hand opening, and it sports a cylinder lock and a flush door pull handle. With an expanded 6-RU opening in the top and bottom, you maintain wire access or ventilation. You can also close these openings with vented or solid panels. This rack is 18.5" deep. A 3-RU blank panel is included.

Cold-Rolled Steel Construction    Open Top & Bottom for Wiring Access    Included 11-Gauge Mounting Rails    Included Rear Door    Cylinder Lock & Flush Door Pull Handle    3-RU Blank Panel Included    18.5" Deep

Rack rails are precision tapped at 10-32, and recessed 17.5mm. These plated rails include convenient RU indicator hash marks to aid in equipment alignment. Rails are standard E.I.A. 5/8"-5/8"-1/2" spacing.

Conduit arrays are located on the top and bottom surface panels as well as the top and bottom back flanges. Flange arrays consist of five knockouts (three 1" standard, and two 0.5 x 0.75" concentric). Surface arrays are comprised of 4 knockouts (two, 1" standard knockouts and two 0.5 x 0.75" concentric).

Related Questions and Answers

Q: 1. Can this hold the Sigma 150-600mm C and a Fuji X-T2 with adapter and battery grip?

A: The f-stop Navin Welded Camera Pouch is not big enough to hold your gear.

Q: 2. What is the total length of this when opened out straight?

A: Length 5.9" / 15 cm

Q: 3. It seems like this may have been answered, but would it fit a mirrorless (Z7) with the 70-200 with lens hood?

A: It will fit but you will have to turn the foot to the side and the lens hood must be reversed. It's tight even after doing those steps. We recommend the Lowepro ProTactic TLZ 75 AW Convertible Camera Bag https://bhpho.to/3H3iEjN . You'll just have to reverse the lens hood to put it in the bag.

Q: 4. Is the clamp big enough to attach to the legs of a RRS tripod? Legs have a 5 circumference.

A: No, not with the clamp supplied with the arm. It is really designed to be used with a Manfrotto tripod that has a threaded Easy Link 3/8 socket milled into the spyder. However, a Super Clamp will secure it to a tripod leg, with a considerable weight penalty.

Q: 5. The description says it’s made of aluminum, but are there steel parts in the construction? I’m working with salt water and concerned about corrosion.

A: Yes there are steel parts on this

Q: 6. Does the 244 series attach to Manfrotto's Easylink system found on the Video Fluid Heads?

A: The 244 Micro Friction Arm can attach to Manfrotto's Easylink system found on their video heads and other products.

Q: 7. What are the minimum and maximum dimensions of this bag? Would it fit a Would this fit a Nikon Z with a z 24-50mm f4.5-6.3?

A: The f-stop Navin Welded Camera Pouch interior is 13" long and 6.5" wide at the top.

Q: 8. will Nikon Z8 with 70-200 Z series lens with TC-2X teleconverter attached fits in this pouch?

A: The Nikon Z8 Mirrorless Camera with the Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens and the Nikon Z Teleconverter TC-2x attached fits in the f-stop Navin Welded Camera Pouch.

Q: 9. Does this include the straps to wear on the chest with the backpack?

A: The f-stop Navin Welded Camera Pouch comes with a shoulder strap which can also be used on the D-rings designed for wearing the pouch on your chest. As an alternative, you may also choose to purchase the f-stop Gatekeeper Straps (2-Piece, Anthracite/Matte Black), B&H # FSM815, as a separate accessory to mount the case on your chest if you are wearing another backpacak or case.

Q: 10. Photos show this being screwed into Manfrotto Tripods where the rosette handle mounts up. This is a metric 6mm thread. Does this come with the 6mm adapter?

A: Each end will be a 1/4 20 and there will be a 3/8 adapter included.