Switch from sitting to standing and back easily and smoothly with the Uncaged Ergonomics Rise Up Electric Adjustable Height Sit/Stand Desk with a white steel frame and a black bamboo desktop. Its two independent motors, one for each three-stage leg, help provide quick, smooth height adjustments from 23.6 to 49.2". Four height settings can be pre-set into the control console for one-touch adjustment to your preferred height.

60 x 30" Desktop    Dedicated Motor for Each Leg    Height Adjustment from 23.6 to 49.2"    Four Height Memory Settings    LED Height Readout Screen    Anti-Collision Technology

• Dual-motor, three-stage lifting column design for fast adjustment and extended height range
• Memory keypad with four memory presets
• Anti-collision technology to help prevent lowering the desk too far
• Steel frame, solid bamboo desktop
• No crossbar
• Low 50 dB noise level

Related Questions and Answers

Q: 1. What is the min working height? See collapsed length is 160cm but doesn't necessarily mean min working height with how the legs collapse

A: The minimum working height on the Kupo Two-Section Wind-Up Stand is approxemelty 135cm/53 inches.

Q: 2. Will this stand work outdoors? Or should I order one with two points of attachment for windier days?

A: Yes, the Studio Essentials Pop-Up Background and Reflector Stand may be used outdoors. However, as with all stands (especially for outdoor usage), I recommend using a sandbag on the base of the stand for extra ballast support purposes, such as one or two of the Impact Filled Saddle Sandbag (15 lb, Black), B&H # IMSBFB15.

Q: 3. Is there a manual on how to put on the wheels?

A: The Avenger Wind-Up 39 Stand with Braked Wheels (Chrome-plated, 12') does not come with a manual. To put the wheels on the stand first unscrew the nut from the wheel then slide hex shaped nut in allotted foot space of stand leg. Use the Allen wrench to hold the wheel into place while spinning the wheel until secure. Do this for all three legs.

Q: 4. Does this monitor require calibration? If so, how often? Can I use the SpyderX calibration system on it?

A: For color-sensitive work, it is recommended to calibrate a display about once a month, even for the Apple 27" Studio Display (Standard Glass, Tilt Adjustable Stand). You can use a SpyderX calibration system with this display.

Q: 5. Does the Vesa version comes with the normal tilt stand as an option or just the vesa adapter and I use my own vesa stand/arm?

A: The Apple 27" Studio Display (Standard Glass, VESA Mount Adapter) BH #APMMYQ3LLA does not come with a stand.

Q: 6. Does this work with a Manfrotto 025BS Super boom?

A: Yes, the stand is compatible with Manfrotto 025BSL Super Boom ONLY, Black - 8.8' (2.7 m) B&H # MA025BSL MFR # 025BSL.The adapter the boom comes with works with a female 1 1/8 (Junior or a 5/8th stud)

Q: 7. Hello! Wondering if this stand could support a longer boom arm to hang a light out over the set. Also, anyone know if wheels can be attached to the legs?

A: Yes, to both of the following questions. Please review the following items Impact Boom Arm (Black, Chrome-plated, 86") BH #IMLSABASB • MFR #LSA-BASB https://bhpho.to/3UQl1Ob Kupo 100mm Brake Caster M10 Threaded (Set 3) BH #KUKS940912 • MFR #KS940912 https://bhpho.to/2JXSqld

Q: 8. I'm looking at this to use with my Nikon Z7 & Z6 cameras. I'm trying to figure out how this device gets supported. Does it literally hang off the front lens threads? Does it require being separately mounted and mated to the lens?

A: There are two methods of mounting the teleprompter. 1. Yes, since the prompter is so light, you can hang if off your cameras lens. Adapter rings are provided for this. 2. On the base of the main frame of the prompter there are 3 x 1/4"-20 threads. You can then mount it to most any tripod or other stand.

Q: 9. How can I convert an HDMI signal to USB C so that I can watch a Blu Ray or antenna signal on my Apple Studio Display?

A: The Apple Studio display is not recommended for use with any input device other than a Mac computer, because the monitor's controls are integrated into Mac OS. The Apple Studio Display is not designed to work with Blu-ray or other media players, and as such no adapter exists that is confirmed by Apple to work with this display.

Q: 10. What are the dimensions of the base itself? The specs list 1.5 x 6.8" - which is presumably height x either length or width, as itdoes not appear square.

A: The base for the Auray TT-ISO Isolating Desktop Microphone Stand measures 1.5 x 6.75 x 9.5" (38 x 171 x 241 mm).