Samsung The Freestyle Portable Led Smart Projector

Kino Flo Freestyle 140 Led Dmx Controller For Freestyle T44 Bulbs, (120 Vac Cord)

Product Code: ga187865
Availability: In Stock

$4,016.25 $5,100.64

Qty

0 reviews Write a review

Description
Reviews (0)

This Kino Flo FreeStyle 140 LED DMX Controller for FreeStyle T44 Bulbs comes with a power cord for running on 120 VAC while controlling and powering up to four T44 LED tubes. The controller features four modes that provide near total control of the output of the LED tubes (LED tubes not included). In white mode, the unit drives LED tubes output light with a color temperature range between 2700 to 6500K. It also enables dimming and green/magenta adjustment. Gels/Hue expands the color temperature range to 2500 to 9900K while providing access to background keying presets and over 100 lighting gel looks.

RGB mode provides access to the individual red, green, and blue LED luminaries for precise control. FX Mode provides customizable presets. The integrated display screen shows dim, Kelvin, green/magenta shift, and the DMX Channel. Four built-in buttons default to four Kelvin presets, but you can customize the settings of the buttons. The built-in control knob lets you set dimming, Kelvin, green/magenta levels and DMX address. The controller supports both wired and wireless DMX, and it accepts worldwide power inputs as well as 18 to 36 VDC.

Controller for FreeStyle T44 Fixture 2700 to 6500K in White Mode Dimming 100 to 1%, Green/Magenta Control Extended Kelvin Mode from 2500 to 9900K Kino Flo Presets RGB Mode, FX Mode Integrated Display Screen Local Control Knob and Button Presets Wired DMX and Lumen Radio Wireless DMX Supports Worldwide Power

General
Connections	Power AC Input: IEC Connector DC Input: 3-Pin XLR DMX In & Out: 5-Pin XLR (Male & Female) USB: Mini-B
Dimming Range	100 to 1% Brightness
Power	Voltage AC: 120 to 240 VAC, 50/60 Hz DC: 18 to 36 VDC, 150 W Draw AC: 1.25 A @ 120 VAC DC: 6.25 A @ 24 VDC Fuse 3.15 A/250 V
Dimensions	9.5 x 4.5 x 2.5" / 24.13 x 11.43 x 6.35 cm
Weight	4.5 lb / 2.04 kg
Packaging Info
Package Weight	4.72 lb
Box Dimensions (LxWxH)	12.5 x 10 x 3"

White: dimming, tunable Kelvin range from 2700K tungsten to 6500K daylight; Green/Magenta controls

Gels/Hue: extended Kelvin color range from 2500-9900K and provides access to Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor as well as over 100 well-known lighting gels

RGB: provides access to individual red, green, and blue control. Works with Apps with predetermined RGB presets or color wheels

FX: custom presets like Candle, Fire, TV, Police, Lightning, Paparazzi, Pulse, and Scroll with control parameters that can be altered. For example, Lightning effect has a "Storm" and "Frankenstein" preset, but can change the Rate to provide additional variation

The controller can dim your LED tubes from 100% brightness down to 1%

The controller comes with a Lumen Radio Wireless 120 VAC power cord, but can run off of 100 to 240 VAC at 50/60 Hz. You can also power the controller vie a 24 VDC battery with 3-pin XLR connector.

Related Questions and Answers

Q: 1. For use with the Chimera Medium Pancake, what is the difference between this Speed Ring and this one?? a href= http://www.bhphotovideo.com/c/product/463404-REG/Chimera_9930_Triolet_Mogul_Base_Flood.html target= _blank http://www.bhphotovideo.com/c/product/463404-REG/Chimera_9930_Triolet_Mogul_Base_Flood.html/a

A: I ma sorry but I am not sure which two speed rings you are trying to compare. A regular speed ring only has the pole holes on the outside edges. When assembling a chimera (or similar) soft box, those poles are hard to get in the ring. Especially the last one where the final formation of the soft box or pancake lantern takes it's final shape. The one that comes with the Triolet, or sold separately as a Quick Release type, has the four pol mounting holes that swivel inward. once the pol in in the hole, you can easily use the pole as leverage to bend outward. As it does so, the mount snaps and locks in place. In assembling a pancake lantern, this becomes even more important because the quick release ring helps avoid all the stumbling around in getting the fabric correct on the mount and wire frame. It simply makes the job of set-up and tear down much easier. I got a triolet last December with the quick release speed ring and it has been a joy to work with. Not only is the panacake lantern a joy to light with, but the assembly is quick.Greg KubitschekLincoln, NE

Q: 2. color temptrue?

A: I haven't put a color meter to it yet, but assuming somewhere in 3000 Kelvin range..

Q: 3. Can I use a dimmer with this setup?

A: Hey JC, yes you can. This one is good : a href= http://www.bhphotovideo.com/c/product/755346-REG/Impact_D_1000_D1000_1_000W_AC_Dimmer.html target= _blank http://www.bhphotovideo.com/c/product/755346-REG/Impact_D_1000_D1000_1_000W_AC_Dimmer.html/aBack when I got it, I didn't even know you could plug a dimmer so I got a 500w light bulb as well.

Q: 4. How many amps does this draw ?

A: approx 41 amps at 120 volts

Q: 5. Does this light work with a dimmer, and if so do you have any recommendations?

A: This light can be used with an inline dimmer such as the Impact D1000 1,000W AC Dimmer Control (110-120V) B&H # IMD1000. Please see the image below for reference.

Q: 6. Can I put a CFL bulb in this ?

A: The Chimera Socket Adapter - Mogul to Medium Base, B&H # CHRMMB, would allow you to use a CFL bulb, such as either the Eiko Spiral Fluorescent Lamp (85W/120V), B&H # EIFS85, or the Eiko Spiral Fluorescent Lamp (105W / 120V), B&H # EIFS105Z, with the Chimera Video Pro Plus 1 Triolet Kit.

Q: 7. can I remove the fixture and use it with a speedlight?

A: Yes, the boom on the Smith-Victor MB500 1-Light 250W Mini Boom Hair Light Kit (120 VAC) can be used with other lights. You will an adapter to attach the Speedlight to the boom. This is some options, https://bhpho.to/3Ch4U47 , https://bhpho.to/3WTYCkH.

Q: 8. I live in Australia. Can the T2 be used with a 10 amp plug and on a household circuit? Would this be ideal? Seeing as a 2K Blondie or M18 work fine on household circuits here. Thanks

A: Using Ohms law, the amperage draw for the T2 (2000W) fixture at 120V is approximately 16.6 amps. For 220V it would be approximately 9 amps. I believe Australia is a 220V country therefore it would be right on the edge with a 10 amp receptacle.

Q: 9. does it work 500w

A: The Chimera Mogul Base Lamp - 500 Watts/120 Volts - for Lantern, B&H # CHLM500L, would be a 500 watt bulb that is compatible for use with the Chimera Triolet Mogul Base Flood Light.

Q: 10. Is there a Bowen mount adapter?

A: No. The following unit has a integrated quick release speed ring system built in.

There are no reviews for this product.