The Thor HDCOAX-4 4-Channel HDMI to QAM Modulator is a four-channel HDMI input encoder capable of delivering 1080p resolutions via RF thanks to its dynamic switching between various modulation protocols. Four CVBS and four HDMI input ports encode MPEG-2 video and three audio protocols to your CATV RF output and integrate into your preexisting RF ecosystem. The HDCOAX-4 also features a 50 to 100 ms ultralow latency and closed captioning. Easily install the unit thanks to its rack-mountable design and plug-and-play format. System updates and web-based control can be achieved via the NMS port. An LCD display on the front panel and various buttons offer another form of control.

HDMI 1080p to Coax Conversion    4 x HDMI / CVBS Input, 1 x Coax Output    HDCP Compliant, 1080p60 Resolution    MPEG-2 Video Encoding    50~100ms Low Latency    Three Audio Encoding Protocols    Control and Update via Web-Based NMS    LCD Display and Front Panel Buttons

• HCDP compliant
• Works with most HDMI sources
• Satellite STB up to 1080p60 resolution
• MPEG-2 video encoding
• Low latency 50~100 ms
• MPEG-2, AAC, and DD AC3 audio encoding
• Closed caption, EIA 608
• DVB-C digital QAM, ATSC, DVB-T, ISDB-T RF in one device with modulation dynamic switching
• Control via web-based NMS and easy updates via web
• LCD display and front panel buttons

Related Questions and Answers

Q: 1. Will this unit embed audio transferred via the RCA inputs, into the HDMI out stream? Is there a method to assure video-audio sync?

A: The answer to both questions is that you can sync the audio and it will go out HDMI embedded.

Q: 2. Is there a 3/8"-16 Mounting hole on the bottom of the center column if you remove the weight hook?

A: No, the bottom of the column without the hood does not have a 3/8" hole.

Q: 3. How do I properly install this column? It is constantly loose, jiggles and generally only helps me to blur my pictures. Looking for a video or step by step 'how to' install this. The brief instructions that came with it obviously didn't help me...

A: To install the Feisol CC-2809, first remove your original center column. Then, take the stopper/adapter piece from the CC-2809 and place it where the center column will go in. Put the center column into the adapter piece, and then lock it down. You are now ready to shoot.

Q: 4. What is different with the digital from the previous packs?

A: This pack has a lower sync voltage to prevent a camera that is connected to it from shorting out.

Q: 5. Hi, the description mentions this is for 300cc/300ml or 11oz but image shows a 600cc/600ml which is 20oz. Please confirm?

A: The BH#NPGC11, is the B&H code for an 110z,-300cc graduate. The photo on the page is not accurate, it shows the Kalt 600cc 21oz graduate instead of the Kalt 300cc-11oz.graduate.

Q: 6. Do you offer variable focal length lens for Sentech CCTV camera: STC-HD203SDI?

A: no, I do no. How it is conected with Decimator multiviewers?

Q: 7. Is it possible to have 5 inputs in MW. One must be in the middle of other 4 inputs in corners?

A: Yes you can have 5 inputs in the multi-view.

Q: 8. Does the 2403cx act as a battery, or does it have to be plugged in to power the lights?

A: Hi Basil, it has to be plugged in.

Q: 9. Feisol makes two different short center columns. Each fits different models. Which one fits 3332?

A: According to Feisol's website, none of the short columns fit the 3332.

Q: 10. What do I need to use my pocket wiz to sync wireless?

A: The Speedotron 2403CX uses a 1/4 phono plug for the sync port. The best for Pocketwizards is to use this one, https://bhpho.to/3CORoFh .