System engineers looking for a rugged, high-quality rack will be impressed with the Atlas Sound RX14-25SFD, a 14 RU, 25" deep mobile cabinet that's ruggedly constructed from 16-gauge cold-rolled steel (CRS) and includes heavy-duty casters. Equipped with a front-pair of 11-gauge, CRS adjustable mounting rails tapped 10-32 on standard E.I.A. 5/8"- 5/8"-1/2" spacing.

Optional RR14 rear mounting rails are available for additional support. Front-to-rear mounting rail supports have slotted cutouts to easily adjust rail depth and to provide open raceways for containing vertically run wire and cable. The cabinet is 25.5" deep and has a vertical panel space height of 24-5/8". It features one pair of recessed, hinged, and rubber-padded steel grips on each side (four total) for transport convenience.

Easy wiring access is provided through three wire isolation holes (two, 1 1/2" dia. and one oblong 1 1/2" x 3") in the rear base flange. The units' four, oversized, heavy-duty casters, two of which are locking, ensure smooth mobility, and have a load capacity of 175 lb each —700 lb total weight capacity.

Also include vented and removable locking doors as well as vented top-front and top-rear flanges. Surface mounting front door is 1" deep to provide clearance for equipment knobs and handles which protrude up to 1 1/2" from the front of the rail. Cabinet is finished in #962 black epoxy.

25" Deep    Casters and Side Handles    Solid Doors    Made from 16 AWG Cold-Rolled Steel

• 16-AWG CRS frame manufactured to E.I.A. standards
• Four, 4" heavy-duty casters (175 lb. cap./ea.)
• Includes 1 pair adjustable, 11-AWG, front-to-rear mounting rails
• Mounting rail supports with slotted cut-outs for vertical wire management
• Perforated front and rear top flanges, sides and rear door provide ventilation and dissipation of equipment-generated heat
• Removable rear door (right- or left-hand hinging) included
• RR14 optional rear-mounting rails available
• Rubber-padded steel grip "road handles" (2 per side)
• Standard rack includes base, top panel, side panels, casters, and front and rear doors
• Three, wire isolation holes located on bottom of rear panel for external wire access
• Welded frame for long-lasting durability

Related Questions and Answers

Q: 1. With respects to the Elinchrom Rotalux Deep Octabox (70cm / 27.5") is a white reflector disc comes with it? Thank you.

A: No, Elinchrom Deflector Set for Softlite Reflectors and Rotolux are sold separately. Elinchrom Deflector Set for Softlite Reflectors and Rotolux Softboxes BH #ELDS2M • MFR #EL26310 https://www.bhphotovideo.com/c/product/766090-REG/Elinchrom_EL_26310_Deflector_Set_for_Softlite.html

Q: 2. what is the difference between the stealth and normal version? just the color?

A: This version has some silver and yellow bits. The stealth is all black.

Q: 3. Anyone know the measurement from the platform (where you sit your gear) to the ground? Thanks.

A: it is just under 12"

Q: 4. What is the condition of this Honda generator

A: This Backstage Equipment GEN-01 Armor for Honda 6500 & 7000 Generator is new in a box not used or refurbished. All items on our site are new unless specifically marked as used, with a condition rating. You will also notice the "Used" tab highlighted at the top of our page.

Q: 5. Is there a diffusion sock for the Impact Venture deep dish reflector?

A: The closest option to fit this reflector is the Impact 16 Diffuser Sock B&H # IMDSBD16.

Q: 6. Would this be able to fit a 1750 pelican case when fully assembled?

A: Yes, will be a nice snug fit as the flatbed of the MultiCart RocknRoller R12RT comes in at 34-52 inches fully extended.

Q: 7. What is the deck width for the R12RT? Only the box dimension is given. Thanks.

A: The outside width dimensions of the square metal tubing deck is about 13.5 inches. I use the optional base boards with all three of my carts which provide a better, solid deck and expands the deck out to a 16-inch width.

Q: 8. Does it contain a soft cloth? Or I have to buy it separately?

A: There is no soft cloth included with the Godox Deep Parabolic Softbox (35").

Q: 9. How does this handle being checked on a plane? Should extra protection to the wheels be given when checking it in?

A: I've checked it in four times an all the times we taped down the handle bars. Three times it was fine. And the fourth, one of the tabs that holds the handle bar got really bent and I had to use a crowbar to fix it. If it continued at that pace, I would think it would survive about 4 more beatings or a total of 20 trips. But you're really at the mercy of the handlers. If you do travel, I would put fragile stickers on it and wrapping the whole thing in plastic wrap.

Q: 10. does work directly with the Atomos Ninja V+ or needs to be connected to a camera first? Atomos Ninja V+ says it only supports LANC Slave mode (via camera)

A: Yes, the unit will give support to the following units Atomos monitor/recorders such as the Ninja V Sony cameras with LANC capability Canon cameras with LANC capability JVC cameras with LANC capability Select Panasonic cameras with LANC capability The will 2.5mm LANC connector for connecting and controlling your camera or monitor/recorder's start/stop function.