Use your Nikon Z7/Z6 mirrorless camera to capture the beauty of sea life and environments at depths as great as 328' with the Sea & Sea 06189 MDX-Z7 Underwater Housing. This aluminum-bodied waterproof enclosure is equipped with dual fiber-optic cable ports and support for an optional, internal Optical YS Converter for fiber-optic strobe use, as well as an N-Type 2-pin connector, for sync cord strobes. Ergonomic, mechanical controls, including levers, push buttons, and dials, provide access to virtually all camera functions, while dual side grips offer better balance and handling and give you attachment points for lighting arms.

Built for durability, the housing is constructed from precision-machined aluminum that has been anodized for resistance to corrosion. A built-in leak sensor alerts you immediately in the unlikely event of a breach in the waterproof seal.

The MDX-Z7 ships without a required lens port, and accepts a series of interchangeable ports for various lenses. The housing's focus and zoom gears work with standard F mount lenses and the Nikon FTZ adapter, as well as with Z mount lenses. The housing's external port lock and lens release function allow you to swap lenses quickly and easily between dives--without removing the back of the housing. Optional VF45 and VF180 viewfinders can be added on for easier viewing underwater.

Depth Rating: 328'    Dual Fiber-Optic Cable Ports for Strobes    N-Type 2-Pin Sync Connector for Strobe    Optional, Internal Optical YS Converter    Mechanical Controls, 2 Ergonomic Grips    Access to Virtually All Camera Functions    Precision-Machined, Anodized Aluminum    Interchangeable Lens Port System    Optional Lens Port Required    Accepts Optional VF45/VF180 Viewfinder

• Depth rating: 328'
• Built-in leak sensor immediately alerts you in the unlikely event of a breach in the waterproof seal
• Built to be durable, housing is precision-machined from anodized aluminum alloy for resistance to corrosion
• Grips are made from a die-cast aluminum alloy, which is also corrosion resistant
• Equipped with two sacrificial zinc anodes that will corrode to protect sensitive parts of housing
• Cold shoe mount for connecting lighting arms and other accessories

• Configured with dual fiber-optic cable ports, an N-Type 2-pin sync cord connector, and support for optional, internal Optical YS Converter--all for attachment of external strobes to improve lighting
• Sync cord connector allows for manual flash exposure
• YS Converter converts camera's TTL signal into a light signal, which allows for external flash triggering via the optional Fiber-Optic Cable II. Both TTL and manual exposure are possible with optional, external YS series strobes

• Ergonomic, mechanical controls, including levers, push buttons, and dials, provide access to virtually all camera functions, including diopter adjustment dial
• Important controls, such as Info, ISO, and FN, have been positioned on right and left sides to make them easily accessible while you're holding grips
• When focus/zoom dial is pulled out, gear inside housing moves outwards to allow lenses with large diameters to be mounted easily
• Two comfortable, grooved side grips offer better balance and handling and give you attachment points for optional lighting arms

• Comes standard with 0.5x optical viewfinder
• Optional VF180 and VF45 1.2x viewfinders can be added on to enhance your view through camera's finder for better shot composition underwater

• Ships without a required lens port
• Accepts a series of interchangeable ports for various lenses
• For compatibility details, see port chart linked above

Related Questions and Answers

Q: 1. Does it work with RRS clamp?

A: Yes it does. This works with standard Arca style clamps such as the Really Right Stuff B2-LR-II Lever-Release Clamp (60mm), BH #REB2LRII.

Q: 2. Looks like there are a couple of holes in the upright side of the L. Are either of them threaded for 1/4 20? I want to attach a Black Rapid strap to the L bracket while it is mounted to the camera.

A: There is one 1/4-20 on the lower side of the L bracket, that is sadly the only one on that side.

Q: 3. Is this compatible with the AC adapter kit?

A: Yes, the Neewer MB-N11 Battery Grip for Nikon Z6 II and Z7 II allows you to charge batteries with a USB-C cable attached to a USB charger in a wall outlet.

Q: 4. Will the Tilta Ta-CC1-B work with a Smallrig 2926B on a Nikon Z6?

A: No, the mounting points on the Smallrig 2926 do not line up with that of the Tilta HDMI Clamp Attachment for Tiltaing Nikon Z6/Z7 Cage.

Q: 5. What's the two rubber gaskets for?

A: The rubber gaskets are there if one needs them to facilitate a better fit for the L bracket.

Q: 6. Will this allow the FTZ to be used at the same time?

A: Yes you can use the Nikon FTZ Mount Adapter BH #NIFTZ • MFR #4185 with the with the z6 or z7 on the Sunwayfoto PNL-Z6 L-Bracket for Nikon Z6 and Z7 BH #SUPNLZ6 • MFR #PNL-Z6

Q: 7. Will this work on a manfrotto 055xproB tripod?

A: The Sunwayfoto Dedicated L-Bracket for Nikon Z6 II and Z7 II Mirrorless Cameras is compatible with tripod heads that have an Arca-Swiss Style clamp. If you have a head like that on the Manfrotto 055xproB tripod it will work

Q: 8. Does it fit the Z5?

A: Yes it does appear to fit just fine on the Z5.

Q: 9. Does it fit the Z6 II?

A: It will not. The z6ii footprint is larger.

Q: 10. Will this fit the Z7 ii?

A: Yes, this bracket will fit the Z7II.