An asset in the studio or on location, the 13 x 6.75" panel Spectro LED 800B1 Bi-Color LED Light Panel by Genaray employs 800 LEDs for output that's variable from 3200-5600K for matching other fixtures or ambient light conditions while maintaining a high CRI/TLCI of 95 indicating faithful and accurate rendition of color. Light intensity is variable from 100-10%. Both functions are adjustable locally on the fixture or remotely at distances up to 65' with the included wireless remote control. Settings are displayed on the light's back panel LCD screen.

The Spectro LED 800B1 has a yoke that permits tilting when stand mounting with its 5/8" receiver. The receiver also has side access to offer a more horizontal mount that allows for an expanded tilt range without the barndoors being impeded by the light stand. The receiver offers an additional benefit accessed by removing the tightening knob which converts the receiver to a 1-1/8" pin for stands with a Junior receiver.

The fixture is ready for worldwide use thanks to its included multi-voltage 100-240 VAC adapter but you can also take advantage of the light's V-Mount battery plate to operate the light on optional batteries when mains power is unavailable. Optional accessories include removable 4-way barndoors that limit spill light and allow you to further control the light's tight 45-degree beam spread. The barndoors have removable textured inserts that ensure maximum output while lending a slightly specular, snappy quality of light. Remove the inserts if you prefer a softer look.

For Studio & Film/TV Production    Output: 4600 Lux at 3.3' (4400K, 45°)    3200K to 5600K; Bi-Color Control    13 x 6.75"; AC/DC Operation    CRI 95 | TLCI 95    On-Board and Wireless Control    Passive Cooling for Silent Operation    10-100%: Dimming, LCD Display    Integrated V-Mount Battery Plate    Includes Diffusion Filter, Remote, Case

Color is adjustable from 3200K-5600K or anywhere in between in 100K increments.

The Spectro LED 800B1 is conveniently dimmable from 100-10% and can be adjusted by 1% increments to ensure the ideal light level for your requirements.

The high CRI/TLCI rating of 95 indicates faithful and accurate color rendering.

Flicker-free output allows you to shoot at a high frame rate for slow motion.

The Spectro LED 800B1 runs on the included multi-voltage 100-240 VAC power supply or on optional V-Mount batteries when mains power is unavailable.

Adjust both color temperature and light intensity from distances up to 65' with the included wireless remote control.

The Spectro LED 800B1 has a combination 5/8" receiver / 1-1/8" pin for stand mounting.

The optional 4-way barndoors have textured silver inserts for enhanced output that can be removed for a softer look. The barndoors provide control of the light's tight 45-degree spread.

Related Questions and Answers

Q: 1. Does this come with the diffuser as shown in the picture?

A: Yes it does come with a diffusion cover.

Q: 2. Can these lights be controlled by a wall dimmer switch?

A: No

Q: 3. Is the remote rechargeable? If not, what kind of batteries does it use?

A: The remote operates on a 23 A, 12 V battery ( B & H # ENA232 ) .To replace the battery, access it by removing the screw on the back of the remote with a small Phillips screwdriver.

Q: 4. Are there any recommendations for soft boxes that will fit this light set up?

A: # ANLCSB1206 soft box will work

Q: 5. Can the AC adapter be purchased separately?

A: You can make that request of the manufacturer, if you like: https://bit.ly/3FKrDFx Here are two other options: Nanlite Power Adapter for Pavotube 15C (B&H# NAPA15V3AP15): https://bhpho.to/3xmF8rS ikan 15 Volt 4.0 Amp AC/DC Adapter for Onyx OYB05 LED Panel (B&H# IKAC15V40AO5): https://bhpho.to/2Zm2zVP

Q: 6. I'm looking at these lights to photograph artwork(paintings) with the included softboxes. Is this a good choice?

A: If the paintings are fairly small these could work. You generally want the softboxes to be about the size of the piece of art. If you are lighting a larger painting you would want say 4 of these to cover a larger piece evenly.

Q: 7. How loud are these lights?

A: The Genaray SpectroLED Essential 500IIB Bi-Color LED 2-Light Kit have passive cooling systems and have no fan noise

Q: 8. How long is the AC adapter included?

A: According to the manufacturer: The power adapter to the light = 5’ The power cable to the power adapter = 14.5’

Q: 9. Does this kit include barn doors?

A: No it does not , it can be purchased separately B&H # GESPS1200BD

Q: 10. How do I recharge the optional lithium batteries?

A: You may want to consider the Watson NP-F770 Battery Kit with Compact AC/DC Charger, BH # WANPF770CK which has charger included. https://bhpho.to/3AnIewj