The P9HW from Shure is a two-channel stereo wired personal monitor with individual mix controls. It is designed to deliver improved audio clarity and reduced feedback than traditional speaker wedges, in audio application such as live stage, theater, rehearsal, houses of worship and more. You can listen to one or two channels of audio from the mixing console through earphones; using MixMode you can customize the mono blend or listen to the stereo mode and set the left and right audio balance individually.

The P9HW is built with a four-band EQ and has volume limiting so you can further individualize your sound. Two standard AA batteries provide up to 6 hours of continuous use. An optional SB900 rechargeable battery (sold separately) extends runtime and will allow you easy in-unit charging. With a compact and rugged aluminum body, the P9HW ensures a long lifetime of use. This bodypack receiver clips onto a belt or guitar strap. A Y-splitter cable is included for connection to audio sources.

For Live Stage,Theater and Rehearsals    Two Channel Stereo    Runs on Two AA Batteries    Rugged Aluminum Body    Includes Belt Clip    Includes Y-Splitter Cable

LCD display with menu-based navigation

Easy to adjust volume knob and mix controls

Volume limiter sets the maximum volume adjustment range

Includes a 4-band parametric EQ

Switchable line (+4 dBu) and aux (-10 dBV) input level

Power and battery status LED

5 segment battery life meter

Power save mode and automatic power-off preserves battery life

Related Questions and Answers

Q: 1. Is compatible with wireless go rode?

A: This mic is not fully compatible, because it is designed specifically for a transmitter with that excepts a locking 3.5mm connector. I would recommend a mic with a standard mini connection, such as the Countryman Isomax 2 All Purpose Microphone, BH #COIM2CW405TO to go with the Rode Wireless go transmitter.

Q: 2. Will this antenna fit the Shure P10Rplus PSM1000 Bodypack Receiver ?

A: The Shure UA700 is a replacement whip antenna for the Shure UR1 UHF body-pack transmitter.

Q: 3. Funciona si uso un receptor Shure BLX4 H9 con un transmisor Bodypack H10?

A: No. El transmisor y el receptor deben estar en el mismo bloque de frecuencia.

Q: 4. Do these support encryption from Axient or ULX-D transmitters?

A: No, the Shure P3RA Wireless Bodypack Receiver for PSM300 System is designed for use with the Shure P3T Transmitter. It will not receive audio or encryption from the Shure Axient or ULX-D series transmitters.

Q: 5. Would this work with a Zoom F2 field recorder?

A: Yes, the Sennheiser MKE 40 Cardioid Lavalier Microphone with Hardwired 1/8" TRS Connector for EW Series Bodypack Transmitter is compatible for use with the Zoom F2 Field Recorder.

Q: 6. Any way to find an adapter to allow this to be powered by AC?

A: There is no known battery eliminator/AC adapter option for use with the Shure P3RA Wireless Bodypack Receiver for PSM300 System. An alternative powering solution would be found in the Shure SB900B Rechargeable Lithium-Ion Battery for Bodypack Transmitters/Receivers (BH #SHSB900B): https://bhpho.to/3JPx5sT

Q: 7. I am not sure if the H numbers strictly refer to the frequency range. Are any of these compatible with Shure PG88 Wireless Microphone Mic Receiver H7 536-548 ?

A: The use of "H9" in reference to the Shure BLX1 Wireless Bodypack Transmitter (H9: 512 to 542 MHz) does indeed refer to the specified frequency range this transmitter operates on. The Shure PG88 receiver is from a discontinued product line and compatible transmitters do not appear to be available any longer unfortunately. Please contact our Pro Audio team via phone, chat, email, or in-store for assistance in choosing a new system.

Q: 8. is this product compatible with the Line 6 xd-v55 bodypack?

A: It should be if your body pack has a mini xlr input.. It works perfectly with my Samson.

Q: 9. Will the Sennheiser MKE 40Cardioid work with a Mevo start camera?

A: The MKE 40 will not connect directly to the Mevo Start. This mic is intended for use with a wireless transmitter, but can be used as a wired mic with appropriate adapters and a phantom power supply. You can use the Sennheiser MZA 900 P - In-Line Preamplifier and Power Supply for EW Series Microphones (B&H # SEMZA900P) which has an XLR output to connect with a phantom power supply such as the Mackie M48 Single-Channel 48V Phantom Power Supply (B&H # MAM48) or Rolls PB23 - Single Channel Phantom Power Supply (B&H # ROPB23). From the output of the phantom power supply, you can use an XLR to 3.5mm cable such as the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable (B&H # KOXRSM03B) to connect to the mic input on the Mevo Start.

Q: 10. Can the sennheiser AVX series drive this mic properly? If not, why not?

A: Yes, the Sennheiser MKE 40 Cardioid Lavalier Microphone is compatible for use with the Sennheiser SK AVX Digital Bodypack Transmitter.