The white JBL Professional PD6212/64 Passive/Biamp Two-Way Full-Range Loudspeaker is a versatile, high-output speaker well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6212/64 is comprised of the JBL M222-8A 12" low-frequency driver with a 3" voice coil and a 2453H 1.5" exit high-frequency compression driver with a 4" voice coil. The two PT Progressive Transition waveguides provide 60x40° of coverage and both are rotatable for deploying the loudspeaker system in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap, while a well-controlled off-axis response enhances arrayability. The PD6212/64 will perform as either a biamped or passive cabinet, at the flick of a switch.

High Output    Horn-Loaded 12" Low-Frequency Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguides    Rotatable Low- & Hi-Frequency Waveguides    60 x 40° Coverage    Frequency Response: 90 Hz to 16 kHz    NL4 speakON and Barrier Strip Inputs    DuraFlex Finish    M10 Threaded Attachments for Rigging

• 12" horn-loaded LF woofer and large format HF compression driver
• High-sensitivity design with high continuous SPL capability
• Large PT Progressive Transition waveguides provide consistent 60 x 40° pattern control, low distortion at high SPL levels and smooth frequency response
• Rotatable low- and high-frequency waveguides allow either horizontal or vertical cabinet orientation
• Sophisticated, steep-slope passive crossover network with switchable biamp/passive crossover modes

Related Questions and Answers

Q: 1. Do you sell the back plastic panel or know who would for this speaker? Also the full speaker replacement 15” 1000w

A: You can contact D.A.S. Audio for replacement parts. You can reach them by phone at 305-436-0521 or 888-327-4872. The US office is based in Miami, Florida and business hours are Monday to Friday 9 AM to 6 PM.

Q: 2. Maximum throw distance is 15m, but how close can the front be before driver integration and directionality compromises performance? Is 10 - 12 ft too close?

A: For all of the C211, The Horn is aimed down 10° and the system sums at about 3’ feet between the Woofer and Horn. The C221, C222, C222HP use a dual dissimilar technology that beams the HF downwards as required for commercial cinemas with stadium seating. I would not recommended these for home installs(with Limited Height) if the seats are not within the -20° angle of the horn.

Q: 3. This speaker has Bluetooth system

A: No, the Turbosound NuQ152-AN does not have Bluetooth built-in. but you can use a separate Bluetooth receiver adapter which would allow you to stream audio from another device like a smartphone, tablet or computer to the speaker.

Q: 4. I know that the maximum throw is about 44 ft. But, what is the minimum distance? In other words, how close can I sit before integration is compromised? Is 10-12 ft too close?

A: The JBL Two-Way ScreenArray Cinema Loudspeaker (B&H # JBC211) has a minimum usable distance of about 3'. Ideally, listeners should be within a 20° angle of the front of the speaker.

Q: 5. I am looking to have these speakers controlled by a lecture amp ?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 should have a minimum of 100 watts input at 8 ohms. Check your lectern's amplifier output rating.

Q: 6. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 7. what would be a recommended amp to run four of these speakers?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will work well with the: Crown Audio DSi 2.0 Series LA4 1200W 4-Channel Amplifier for JBL Cinema Loudspeakers B&H # CRLA4 Key Features: For Professional Cinema Rooms JBL Cinema Speaker Tuning Presets 2200W at 4 Ohms per Channel DriveCore Technology for Reliability Intuitive LCD Screen for Set Up Onboard 96 kHz/32-Bit DSP Crossovers, EQ, Delay, Filters, Limiting RJ45 for HARMAN Audio Architect Software SNMP for Theater Management Systems

Q: 8. It looks like the C221 is side-ported. How much space is required between them in an LCR configuration for the ports to work as designed?

A: The Ports sum with the LF almost in place. As long as the ports are not obstructed, there shouldn’t be an issue.

Q: 9. What is the length of the C211 speaker

A: Dimensions 31" H x 40" W x 12" D (79 x 102 x 30.5 cm)

Q: 10. What bracket do we use with the ac 28w speaker?

A: JBL recommends the JBL U Bracket f/Models AC28/XX white finish7. That would be B&H part number B&H # JBMTU28WH.