The black JBL Professional PD6322/43 Passive/Tri-Amp Three-Way Full-Range Loudspeaker is a versatile, high-output speaker delivering clear and intelligible high-frequency projection, an extended low-frequency response, and low distortion at even the highest drive levels. The loudspeaker is well suited for professional installations such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live music venues, night clubs, sports facilities, and theme parks.

The PD6322/43 is comprised of two JBL 2206H 12" Vented Gap Cooled (VGC) low-frequency transducers with 4" voice coils, a CMCD-82H 8" cone midrange compression driver with a 3" voice coil, and a 2432H, 1.5" exit compression driver with 3" voice coil. The midrange compression driver consists of a driver/phasing plug assembly providing high output with low distortion. The two PT Progressive Transition waveguides provide 40x30° of coverage and both are rotatable for deploying the loudspeaker system in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap, while a well-controlled off-axis response enhances arrayability. The PD6322/43 will perform as either a tri-amp or bi-amp (passive mid-high) cabinet, at the flick of a switch.

High Output    2 x Slot-Loaded 12" Low-Frequency Drivers    Horn-Loaded Midrange Compression Driver    1.5" Exit HF Compression Driver    Progressive Transition Waveguides    Rotatable Mid- & Hi-Frequency Waveguides    40 x 30° Coverage    Frequency Response: 49 Hz to 16 kHz    NL8 speakON and Barrier Strip Inputs    M10 Threaded Attachments for Rigging

• Two high-power 12" transducers in a compact slot-loaded configuration for low-frequency extension to 40 Hz
• High-power Cone Midrange Compression Driver (CMCD) with a driver/phasing plug assembly provides high sensitivity and high continuous SPL capability along with low distortion, extended bandwidth, and improved phase coherence
• Large-format neodymium HF driver provides clear, intelligible high-frequency projection
• Large Progressive Transition (PT) waveguides provide consistent pattern control, low distortion at high SPL levels, and a smooth frequency response
• Rotatable mid- and high-frequency waveguides allow either horizontal or vertical cabinet orientation.
• Sophisticated, steep-slope passive mid/high crossover network with switchable tri-amp/bi-amp crossover modes

Related Questions and Answers

Q: 1. This speaker has Bluetooth system

A: No, the Turbosound NuQ152-AN does not have Bluetooth built-in. but you can use a separate Bluetooth receiver adapter which would allow you to stream audio from another device like a smartphone, tablet or computer to the speaker.

Q: 2. Do you sell the back plastic panel or know who would for this speaker? Also the full speaker replacement 15” 1000w

A: You can contact D.A.S. Audio for replacement parts. You can reach them by phone at 305-436-0521 or 888-327-4872. The US office is based in Miami, Florida and business hours are Monday to Friday 9 AM to 6 PM.

Q: 3. this loud speaker 3 way 4732 MADE BY USA / CHINA / KOREA ?

A: According to the information in our system provided by JBL, at this time the 4732-T is manufactured in Mexico.

Q: 4. What bracket do we use with the ac 28w speaker?

A: JBL recommends the JBL U Bracket f/Models AC28/XX white finish7. That would be B&H part number B&H # JBMTU28WH.

Q: 5. Is there a temperature range these can be installed in?

A: This is rated to work between -67 degrees to 120 degrees F. based upon a Mil Spec rating of 810 as listed in the product spec sheet. https://jblpro.com/en/site_elements/jbl-professional-specifications-awc82-spec-sheet

Q: 6. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 7. Is it okay to Bi-Amp JBL C211?

A: The JBL Two-Way ScreenArray Cinema Loudspeaker BH #JBC211 may be bi-amped: For Single-wire passive operation, leave the jumpers in place (jumpers link the LF+ and HF+ terminals together and the LF- and HF- terminals together). For Bi-wire passive operation, remove the jumpers and wire the LF± and HF± terminals to the respective amplifiers Designed for small cinemas and VIP rooms for a maximum throw of 52'

Q: 8. What is the length of the C211 speaker

A: Dimensions 31" H x 40" W x 12" D (79 x 102 x 30.5 cm)

Q: 9. Is this for one or a pair?

A: This is a single speaker.

Q: 10. Does this speaker support upper and lower pole mount options?

A: The Mackie C200 Passive 10" 2-Way Loudspeaker has a single pole mount socket on the bottom of the speaker and also has an asymmetrical trapezoidal cabinet for floor monitor positioning.