Designed for businesses such as restaurants that need secure, short-term storage for cash and a secure spot for long-term storage of valuables or documents, the 2.6/4.7 Cubic Foot 2-Lock Depository Safe from Barska offers the security of solid steel construction. The 2.6 ft³ drop safe has a one-way deposit door with anti-fishing baffles, and both the drop safe and the 4.7 ft³ locker feature five steel locking bolts in their doors. A lockout mode disables the keypad after repeated unsuccessful attempts to open, providing additional security.

The drop safe has one shelf and the locker has two. Authorized personnel can easily open the safe using one master PIN or up to five user PIN codes for each side, a beneficial arrangement for many businesses. The unit measures 30.8 x 27.3 x 21" and weighs 257 pounds. It comes with pre-drilled holes in the bottom for mounting plus mounting hardware and two backup keys.

Solid Steel Construction    2.6 ft³ Anti-Fishing Drop Safe    4.7 ft³ Locker with Two Shelves    5 Steel Locking Bolts Each Compartment    One Master, Five User PIN Codes    Lockout Mode    Measures 30.8 x 27.3 x 21"    Weight: 257 Pounds    Pre-Drilled Mounting Holes in Bottom    Runs on One 9-Volt Battery

• Constructed with 1/8" steel
• Safe has 2.6 ft³ drop with anti-fishing baffles
• Locker is 4.7 ft³ with two shelves for longer-term storage of valuables, documents, etc
• Solid steel construction
• Five steel locking bolts for each safe
• One master PIN and up to five user PINs for each safe
• Repeated unsuccessful attempts to open the safes trigger lockout mode that disables the keypad
• Set of two emergency backup keys
• Mounting holes & hardware kit
• Drop safe inner dimensions: 18.5 x 13.8 x 17.5"
• Storage locker inner dimensions: 18.5 x 16.5 x 26.5"
• Overall dimensions: 30.8 x 27.3 x 21"
• Weighs 257 pounds
• Runs on one 9-volt battery

Related Questions and Answers

Q: 1. Hello everybody. Lost my diffuser for this reflector in a crowded place... Possible to only by the diffuser ? Where ?! Thanks !

A: The diffuser to the Godox 4.7" Standard Reflector for Select Bare-Bulb Heads BH #GOSTDREFL is not sold separately.

Q: 2. will this clear an umbrella shaft?

A: No.

Q: 3. If I'm going to be mounting the AT875R on the camera, not holding it, is there any advantage to using foam cover as apposed to just one of these, or would this do for everything?

A: This is a few years after the original question, but the dynamics are still the same for anyone else wondering if these higher-end dead cats are worth the extra few bucks. YES, there is an advantage over every other option out there, including the lesser-priced ones that are really only the fuzzy part and retrofit over your existing foam windshield. Look at the picture of the cutout on the Auray professional windscreen. See the webby network of nondescript "whatever that is" between the outside of the dead cat (IE the fuzzy exterior) and the microphone itself? THAT is what keeps the wind out. It is made of a pliable plastic, and because of its jumbled weave, it cuts the path of the wind from as many directions as you see "jumbles." In my experience, the fluffy exterior helps more with cutting plosives and with sibilance. Let's put it this way, when I want clean audio, these professional windscreens are what go on my microphones. When I NEED a video that requires an audio sync with wind (a close of leaves blowing, etc), I will record two tracts: one mic with the professional windscreen for clean audio, and the second mic with the mic-kit "foam" one, so I will have "just enough" wind noise to match the scene!

Q: 4. Do these adhere completely with the Rimage Everest 400?

A: They have worked perfectly satisfactorily on my 5400 with Everest 400 printer.

Q: 5. What type of mount is it? It has no details and I cannot tell whether this is now replacing the old standard reflector

A: This mount is used on the AD200 barebulb and the AD360 Godox flashes. It is also used on Quantum and Norman flashes.

Q: 6. can you use DVD+R to record songs?

A: Yes, but blank CDs are cheaper then using DVDs that record sound and picture.

Q: 7. Is this suitable for a 416 t

A: It works quite well!

Q: 8. Does it reduce indoor fan noises? Heating vents, computer fans, etc.?

A: This thing protects the mic capsule from wind striking the capsule. It does not negate or filter out any ambient sounds. So unless that computer fan or heating exhaust is blowing on the capsule, it will have zero effect on those issues.

Q: 9. Does this product work with the Deity Microphones V-Mic D3 Pro ?

A: Yes the Auray WSS-2014 model is compatible with the Deity Microphones V-Mic D3 Pro.

Q: 10. can this be used with any other prompter software? MAC COMPATIBLE?

A: Yes, the foot controller will work with any teleprompter system but can only be driven using autocue software.