Mount your 30mm maintube riflescope easily and securely on any Weaver rail with these high Hawke Sport Optics Two-Piece Tactical Ring Mounts. The rings hold your scope tightly with three Torx screws, and mount to the rail with one hex thumb screw. A crossbar provides additional security round after round, and cushioning tape on the interior prevents scratches to your scope's finish.

Three Torx Ring Screws    Hex Thumb Mounting Screw    Internal Cushion Tape    Anodized Aluminum Construction

• Fits 30mm maintubes
• Compatible with Weaver rails
• Built with high base
• Three Torx screws hold ring closed
• Hex thumb screw for mounting on rail
• Interior cushion tape protects scope finish

Related Questions and Answers

Q: 1. Which mount comes preinstalled?

A: The DZOFilm Pictor has the PL mount attached to the lens. It comes with an EF mount adapter, that you would attach to the lens. See Page 8 https://www.bhphotovideo.com/lit_files/951702.pdf

Q: 2. Would this work as a replacement foot for a Benro TAD28C Adventure tripod?

A: The MeFOTO 3/8" Foot for WalkAbout S Monopod (Single Piece) is not compatible with the Benro TAD28C Adventure tripod. The one that works with that tripod comes in a set of three, https://bhpho.to/3bQbzs1.

Q: 3. Is this comfortable for women to wear?

A: Yes - I find it very comfortable for carrying a DSLR with a 100-400mm lens while hiking or riding an ATV. However, its not the most flattering - a strap goes diagonally across your chest.

Q: 4. Will this bracket fit a Sony a6600?

A: The Sony A6600 and the a6400 have different dimensions so the Sunwayfoto One-Piece Dedicated L-Bracket for Sony a6400 won't fit. I recommend this Desmond L bracket that will work with the Sony A6600. https://bhpho.to/44FACEv

Q: 5. Which version of the Genustech nun's knickers fits their Production Matte Box?

A: This listing is for the Lens Adapter Ring with Nuns Knickers for Production Matte Box. This is compatible with the Production Matte Box.

Q: 6. My camcorder rig weighs 8 pounds. Can this shoulder strap support this? I plan to hang the camcorder same as a DSLR - via 1/4-20 tripod mount.

A: The BlackRapid Sport Breathe Camera Strap could support an 8lb camcorder.

Q: 7. When converted to EF mount, is it compatible with RED DSMC1 & 2 cameras?

A: Yes, as long as your RED DSMC1 or DMSC2 camera is using an EF mount, the DZOFilm Pictor 14-30mm Lens will be compatible.

Q: 8. What is the difference between this item and the Genustech GARD-NK Universal Donut "Nun's Knickers" Adapter Ring? Which one works with the Genustech GWMC Wide-Angle Matte Box?

A: The Genustech GARD-NK Universal Donut "Nun's Knickers" Adapter Ring has a 105mm Outside Diameter, compared to 114mm, BH #GEGARDNK. According to Genustech BH #GEGARDNK is the proper option for the GWMC Wide-Angle Matte Box for 4 x 4" Filters, BH #GEGLGWMC.

Q: 9. Is there a cable through the strap so it could not be cut? And does the screw every come lose?

A: I tighten the screw every time I put the strap on, and I have not had it come loose. But the silver-colored hook for the strap that goes under the arm comes out very easily. I tied strong carpet thread across the opening of the hook to keep it from sliding out.

Q: 10. Does it fit Panasonic camcorder dvx200. Thx

A: Yes, the Century Precision Optics 0.75x HD Wide Angle Converter High-Resolution, 72mm Thread can mount to the Panasonic AG-DVX200 4K Camcorder with Four Thirds Sensor and Integrated Zoom Lens.