The 800-Watt Networkable 4-Channel Power Amplifier with Optional Dante Network Audio is a DSP controlled four-channel amplifier that can be configured in three amplification arrangements. It can be used in its default configuration setting of four-channel 70V commercial power amplifier, or configured into a four-channel mode with either 4- or 8-ohm load impedances for two stereo zones. The unit can be configured as a 70.7/100V paging/background system on two channels and a 4 or 8 ohms foreground stereo applications on the other two channels.

The amplifier features four balanced line inputs and an accessory slot for a separately available DPA-DAC4 four-channel Dante receiver card or a DPA-AMIX input card with two mic/line and two AUX inputs. All inputs can be mixed and routed to any of the four amplifier channels, and all amplifier channels feature DSP tools such as level controls, EQs, limiters, high- and low-pass filters, and delay to provide flexibility for a range of applications.

70.7 / 100V or 8 / 4 Ohms Functionality    Configurable DSP Processing    PC-Based DPA Site Manager Software    4 Balanced Inputs, Expandable to 8    Slot for Optional 4-Channel Dante Card    Front-Panel GUI    Control via PC or Mobile Device

• 70.7 / 100V or 8- / 4-ohm functionality
• Configurable DSP via GUI
• PC-based DPA Site Manager Software with LAN IP auto-discovery, fault reporting, input and output status, standby status, and amplifier remote activation via a scheduler timer
• Mute assignments triggered via audio signal or contact closure
• Audio sensing auto power down (APD)
• Four balanced inputs, expandable to eight via accessory card
• Optional accessory card slot for a DPA-DAC4 four-channel Dante receiver or a DPA-AMIX two mic/line, two AUX input card
• F4 GPIO control ports assignable in GUI for mute or remote level
• PC, iOS, and Android controllable

Related Questions and Answers

Q: 1. Is this pack compatible with the older L-2400 heads?

A: Yes, this power pack is backwards compatible with the Norman LH2400 flash heads.

Q: 2. What speed ring do you need for the IL2500 heads to adapt to impact sort boxes?

A: Chimera Octaplus Speed Ring for Norman IL2500 BH #CHSRONIL2500 • MFR #2260OP

Q: 3. I have been running 2 passive speakers with this unit with no problem. I hooked up 2 powered speakers to it today and it shut off and will not come back on. What could be the problem?

A: If you want to output to active speakers, you need to use the RCA stereo outputs going into those kinds of speakers. The 1/4'' speaker outputs on the back are made for compatibility with passive speakers only.

Q: 4. can i use this as a power amp to add speakers to my surround sound system?

A: Yes, the Pyle Pro PMX840BT Bluetooth 8-Channel 800-Watt Powered Mixer with Bluetooth is a dedicated amplifier to power passive speakers.

Q: 5. Av is labeled 7.2 On the .2 on the sub are the sub individually controlled? Thanks

A: They appear to be controlled as a pair in the menus.

Q: 6. Thank you for the answer to my recent question. Just one more question. I have a Yamaha CBR10 passive speaker (which has 1 x 1/4" and 1x SpeakOn connectors) amd would like to connect that to the Pyle Pro PMX840BT mixer. Do I need any additional cables (I have a 1/4" to SpeakOn cable with me)?

A: You can connect your Yamaha CBR10 2-Way Passive Bass Reflex Speakers to the Pyle Pro PMX840BT Powered Mixer using 1/4" TS to SpeakOn cables or 1/4" TS to 1/4" TS cables. Either type will work.

Q: 7. what is the voltage requirement? In my residing country Bahrain, we are using 220v.

A: This receiver requires 120v.

Q: 8. I have a Norman 400B that I purchased about 10 years ago. Now, the battery will no longer hold a charge. Can I get just a replacement battery and are the new versions compatible with the older 400B?

A: Norman has not changed that in a very long time. This is the battery for the Norman 400B,Norman 812863 NiCad Battery for P400B, B&H # NOB400B MFR # 812863.Best would be for you to check with Norman to make sure your specific model has not been changed.a href= http://normanlights.com/contact.asp target= _blank http://normanlights.com/contact.asp./a

Q: 9. Will Octsplus work for square and rectangular soft boxes?

A: The Chimera Octaplus Speed Ring for Norman IL2500 will allow you to mount octagonal, rectangular, or square-shaped softboxes to the flash heads in the Norman D24R Pack, 4- IL2500 Head/Reflector Kit.

Q: 10. Can this unit send a signal TO a laptop using bluetooth? The laptop would be used to host a livestream over Zoom.

A: No, the Pyle Pro PMX840BT does not have Bluetooth output. To stream wireless to a Bluetooth enabled device like a laptop, you would need to connect a separate Bluetooth transmitter to the RCA outputs.