Designed for long-range use with exceptional low-light performance, the Hawke Sport Optics 4-24x50 Frontier 30 SF Riflescope offers a broad zoom range, making it ideal for game of all sizes at most distances. Its large 50mm objective and 21-layer anti-reflection fully multi-coated optics draw in copious amounts of light compared to smaller objective scopes, which provides you with bright and clear images during the dawn and dusk hours, when many game animals are most active, and in heavily canopied areas.

Six brightness levels ensure users will see the LR Dot reticle in a wide range of light conditions. The LR Dot was developed around a typical centrefire trajectory, like the .308 Winchester round, which is popular around the world for shooting fairly large game. The scope's locking fast-focus collar and knurled rheostat control allow you to quickly adapt to rapidly changing situations. A side-mounted focus dial permits parallax adjustment from 15 yards to infinity. The lightweight and durable anodized aluminum housing consists of a 30mm one-piece maintube offering ample elevation adjustment. The tube is nitrogen filled and sealed for water and fogproof performance.

LR Dot Illuminated Reticle, SFP    30mm One-Piece Maintube    1/4 MOA Impact Point Correction    75 MOA Windage/Elevation Adjustment    Exposed, Locking, Zero-Stop Turrets    Side Focus Parallax, 15 Yards-Infinity    Anodized Aluminum-Alloy Housing    21-Layer Fully Multi-Coated Optics    Nitrogen-Filled Water and Fogproof    Runs on One CR2032 Battery

• 4-24x zoom range
• 50mm objective lens
• 21-layer anti-reflection fully multi-coated optics
• 28.2-4.8' field of view at 100 yards

• Developed around a typical centrefire trajectory, like the .308 Winchester round, which is popular around the world for shooting fairly large game

• Elevation aim points at 2.3, 5.6, 9.6, and 14.3 MOA

• Lower aim points can be used for zeroing in meters (200, 300, 400, and 500)

• Thick posts are 14.3 MOA from center, equal to 15" at 100 yards
• Runs on one included CR2032 coin-cell battery
  • Locking fast-focus collar
  • 1/4 MOA per click impact point correction
  • 75 MOA windage and elevation adjustment range
  • Parallax adjustment from 15 yards to infinity, side adjustment turret
  • Exposed, locking, zero-stop turrets
  • Long 4" eye relief
  • 30mm one-piece maintube
  • Lightweight and durable aluminum-alloy housing
  • Nitrogen filled for water and fogproof performance
  • Front and rear flip-up lens covers
  • Screw-on removable 4" sunshade
  • Length: 14.5 inches
  • Weight: 23.4 ounces

  Related Questions and Answers

  Q: 1. We would like to print passport quality photos, does it print as well as the Fronteir 340 model?

  A: No, this would not be able to print passport photos.

  Q: 2. Please let me know the Country of Manufacture?

  A: The country of origin of this printer is CHina

  Q: 3. How long can photos that is printed with ink last

  A: The lines in the pictures show what the reason

  Q: 4. OMG so you are saying for about $3,000 I only get the printer? Then I have to add another $139 for each ink cartridge plus another couple of hundred bucks for the media? So out the door this thing will cost about $4,000, correct?

  A: Yes, this is correct. However a 4x6 print averages to be about ten cents per print.

  Q: 5. can i use any dry photo roll?, i foun one is fuji dry photo paper for IJ that works for the dx100?

  A: As long as the roll paper's size is in compliant with the printer's requirement, and if it is for inkjet printers then it should be compatible.

  Q: 6. What Windows OS is supported?

  A: Window XP (SP3) up to current Windows 10 (included)

  Q: 7. how to fix the fujifilm frontier s with three red lights appeared? i cant print anymore

  A: Depending on what lights are flashing it could be a different error. I have attached the manual bit.ly/1UKzjMBPlease see pages 62-64.

  Q: 8. 1. Is there back printing on this unit to print image number/information? It seems that on one of the product videos they said image information could be printed on the front edge-not the back.2. Also the Fuji specs state 45 seconds dry to dry. If the print time is 30 seconds/8x10 that would indicate a wait time of 15 before packaging. Is this the case? There must not be a heater in this unit?3. In one of the product videos is shows paper being trimmed off between each sheet. If there were no trims between prints an 8 inch wide roll of paper would print 380 8x10 prints per roll (213 sq ft/.56) where 1 8x10 =.56sq ft What is the estimated number of 8x10 per 213 sq ft roll with trims?

  A: 1) There is not an option to print on the back of the paper.2) Yes, this is correct. One should wait 15 seconds before packaging the print.3) Fujifilm does not publish page yield on 8x10s printing on the 8x213 roll paper. They only publish 120 8x10s per hour, at a cost of $.41 per 8x10.

  Q: 9. Spindle and Waste Tank also included with this printer?

  A: Yes the Fujifilm Smartlab Frontier-S comes with the spindle and waste tank. The spindle and waste tank listed in the recommended accessories are just for replacement purposes

  Q: 10. what's the specs for this printer?

  A: here you go:a href= http://www.fujifilmusa.com/products/photofinishing/digital_lab_solutions/frontier_s_dx100/index.html#specifications target= _blank http://www.fujifilmusa.com/products/photofinishing/digital_lab_solutions/frontier_s_dx100/index.html#specifications/a