Own the field with the Hawke 3-15x50 Frontier FFP Riflescope. This optic features a precision-engineered body and gear, high-quality optics, and a first focal plane MIL Ext. illuminated reticle. To live up to the expectations of demanding tactical shooters, the optical system is outfitted with lenses that are treated with 21 layers of anti-reflection full multi-coatings and a wide 50mm objective for maximizing brightness and visibility in challenging lighting conditions. The Mil Pro reticle features 1/2 MRAD spacing out to 10 MRAD for precision holdover on long shots, and small 1/4 MRAD marks provide accurate range-finding capability. A side-focus dial allows for parallax correction from 10 yards to infinity.

Exposed, locking, zero-stop turrets adjust impact point at 1/10 MRAD per click with an elevation and windage adjustment range of 26 MRAD. The 30mm, one-piece aluminum maintube is nitrogen purged and sealed for fog and waterproof performance. A removable zoom ring with thumb lever and locking ocular helps you get on target quickly and stay there. .

Mil Pro Illuminated Reticle, First FP    30mm One-Piece Maintube    1/10 MRAD Impact Point Correction    26 MRAD Windage/Elevation Adjustment    Exposed, Locking, Zero-Stop Turrets    Side Focus Parallax, 10 Yards-Infinity    Anodized Aluminum-Alloy Housing    21-Layer Fully Multi-Coated Optics    Nitrogen-Filled Water and Fogproof    Runs on One CR2032 Battery

• 3-15x magnification
• 50mm objective diameter
• 21 layers anti-reflective coating
• 37.5 - 7.5' field of view

• First Focal Plane
• First focal plane
• One-half MRAD spaced markings extending out to 10 MRAD of holdover
• One, ½, and ¼ MRAD brackets for range finding
• Every second MRAD spacing on lower section is numbered to ensure quick and easy acquisition of target and ease of reference
• Each cross has a see-through gap, allowing an unobstructed view of the target
• Glass-etched with red illumination
• Six brightness levels
• Runs on one CR2032 battery

• 1/10 MRAD impact point correction
• 26 MRAD windage and elevation adjustment range
• Side focus parallax correction from 10 yards to infinity

• Aluminum housing, 30mm mono-tube chassis
• Long eye relief for high recoil and magnum calibers
• Zoom ring with thumb lever and locking ocular Nitrogen-filled, fogproof and waterproof

Related Questions and Answers

Q: 1. is the software included with the printer..if not what is the price of the software

A: The software is included.

Q: 2. Im trying to get more conservative with the price of prints. I have a canon pro 100 and a set of ink is about 120, lasting about two weeks for me. Will this printer make that big of a difference as far as ink?

A: If you are a photographer that likes to use different type of paper or even any set of paper. This printer would not be for you. Yes this printer may be able to get your cost of print down, but you would be limited to a set of specific paper roll type. As good as this printer is, it limits you to a set of options.

Q: 3. Spindle and Waste Tank also included with this printer?

A: Yes the Fujifilm Smartlab Frontier-S comes with the spindle and waste tank. The spindle and waste tank listed in the recommended accessories are just for replacement purposes

Q: 4. Hello, How many 5x7 prints can i get from a paper roll & the cost of each print?

A: The 5 wide roll is 213' long. 2 rolls come in the package. Each roll will yield approximately 350 5x7s, give or take a few. Cost per print figures are based on ink and paper usage yields from Fuji combined with current DX100 ink and paper prices. The average cost per print is: 46 = $0.125, 57 = $0.15, 810 = $0.42.

Q: 5. can we carry this product by airplane ?

A: I would not suggest that, as this (the printer alone( borders the weight and detentions of the max size you can bring on an airplane.

Q: 6. Are there ink cartridges included with the printer, or does the printer ship with no ink?

A: No ink or paper is included with the printer.

Q: 7. Is there an add on software that can used to print multiple copies on a 4X6 print for example standard passport sizes and 2X2 photos.

A: There are no add-on applications to print passports or 2x2 photos. You would have to create a template in a photo editing program like Photoshop or Lightroom. From there you can print two 2x2s,. 4-up and even 8-up on any choice of paper size.

Q: 8. how to fix the fujifilm frontier s with three red lights appeared? i cant print anymore

A: Depending on what lights are flashing it could be a different error. I have attached the manual bit.ly/1UKzjMBPlease see pages 62-64.

Q: 9. Is there an updated version to this printer?

A: Hi,I have had the DX100 for about 2 months and it has performed flawlessly. I purchased it new and am not aware of any newer version. I wish there was a larger format available, but if you can use up to 8 wide it is ideal and reasonably economical. I have used one full roll of 8 paper for about 200 pictures and the ink has been used to only about the 30% rate, except for black - maybe 40%.Hope it helps.Jerry

Q: 10. what's the specs for this printer?

A: here you go:a href= http://www.fujifilmusa.com/products/photofinishing/digital_lab_solutions/frontier_s_dx100/index.html#specifications target= _blank http://www.fujifilmusa.com/products/photofinishing/digital_lab_solutions/frontier_s_dx100/index.html#specifications/a