The Pro-MB Software Plug-In from FabFilter is a professional multiband compressor/expander with six processing bands that can be freely placed anywhere in the audio spectrum. It can be used for audio mixing and mastering applications such as studio recording, post production, and more. Instead of conventionally splitting the entire spectrum with crossovers, Pro-MB enables you to create a new band at the frequency range in which you wish to work. The interactive multiband display clearly shows what the rest of the spectrum is which stays untouched, and, if desired, you can snap bands together to recreate a traditional crossover system. Each band is fully customizable with a threshold, range, attack, release, output gain, ratio, variable knee, lookahead, variable stereo linking, mid-or side-only processing, and much more.

The Pro-MB has a Dynamic Phase processing mode that features much of the same frequency response as traditional multiband processors but doesn't introduce latency or pre-ringing. Additionally, it only introduces minor phase changes when the gain actually changes. Also included are a Linear Phase mode and a Minimum Phase mode. The combination of professional processing with interactive multiband display can help you to optimize your workflow.

The Pro-MB software has comprehensive MIDI specs, including MIDI learn, Smart Parameter Interpolation for smoother parameter transitions, and supports common Pro Tools hardware control surfaces. The software also offers an extensive interactive help feature, and AltiVec and SSE optimization. The plug-in is available in VST, VST 3, Audio Units, AAX Native and AudioSuite formats (both 64- and 32-bit), and RTAS (in 32-bit).

Collection of Seven Plug-Ins    Pro-MB Multi-Band Compressor, Expander    Pro-Q 2 EQ Plug-In    Pro-R Reverb Plug-In    Pro-DS Intelligent De-Esser    Pro-L Limiter    Pro-C Professional Compressor    Pro-G Gate and Expander    Mac and Windows Compatible

Unique Dynamic Phase processing mode featuring zero latency, no static phase changes and no pre-ringing artifacts

Handles any form of dynamics processing, from highly transparent compression, limiting and expansion to pumping upward compression and punchy gating

Each band is customizable with features such as threshold, range, attack, release, output gain, ratio, variable knee, lookahead (up to 20 ms), variable stereo linking, mid- or side-only processing, external side chain input, triggering on a separate frequency range

Steepness of each crossover slope can be freely adjusted between 6 dB/oct and 48 dB/oct

Global dry/wet mix from 0 to 200% to easily scale the total effect of the plug-in

Accurate and smooth real-time frequency analyzer with pre- and post-processing options and 'freeze' feature

Up to four times linear-phase oversampling

GPU-powered graphics acceleration

Undo/redo and A/B comparison

Related Questions and Answers

Q: 1. Does the Freefly MMVI Pro Gimbal have the following rotation Range: Pan: 360, Tilt: 360, and Roll: 360?

A: According to FREEFLY, MVI Pro has a range of:Pan: 360 degrees, depending on what it is mounted to.Tilt: about 300 degrees, physical stops, but obstructed by pan motor and roll beam. Usable is about 100 degrees.Roll: about 300 degrees, physical stops. About 100 degrees working via remote.

Q: 2. does this include batteries and/or cables?

A: This kit includes the connections needed between the ReadyRig and Movi Pro. Also the Movi Pro comes with batteries and a charger.

Q: 3. Has Bushman Panoramic indicated what will be included in this v3 Bundle?

A: The BUSHMAN Panoramic Claremont Monopod 360 Bundle V3 includes: the Pole Pro, the tripod Pro, the Counterweight 500 g, 3x Magnetic popeye, monkey clamp, ground spike, 1/4 spacer, neck strap, camera holder and a case.

Q: 4. Can I remove the landing gear to install the gimbal on a FREEFLY MVI Ring Pro II?

A: Yes, the Movi Pro can be installed by using the quick release mechanism for detaching from the landing gear and installing onto the MVI Ring Pro II,

Q: 5. Could the Sony FS7 & 16-35mm Canon lens work with the Movi Pro? If not, FS5?

A: Since the M?VI Pro has not yet been released it has yet to be specifically tested with the FS7 so we are not yet sure if it will work. We can tell you that the camera cage for the M?VI Pro will be slightly smaller than the camera cage for the M15, B&H #FR95000028, and the M15 is the system Freefly recommends for the FS7. While the FS7 may be too large we are confident that the FS5 will work on the M?VI Pro. Please keep an eye on this page for updates and new information as it becomes available.

Q: 6. Would the Canon XF605 UHD 4K HDR Pro Camcorder fit in the FREEFLY MoVI Pro? Are they compatible size-wise?

A: The FREEFLY MōVI Pro camera cage measures 196 × 200 × 175mm (L×W×H) and the Canon XF605 measures 385 x 219 x 210 mm, therefor, it will not fit onto the FREEFLY MōVI Pro.

Q: 7. does this kit include the mimic unit as well?

A: Yes it does, the Mimic is included in this kit.

Q: 8. anyone know the weight of the movi pro with ring/handle/feet and battery included?

A: About 4-6 pounds.

Q: 9. What's the battery life?

A: One battery powering the Movi and a full size camera like an Arri or RED will last about an hour. The battery then takes about an hour to charge. I would suggest having at least four or six for a pro job.

Q: 10. Will it handle the Canon C-300 MK II?

A: According to FREEFLY, their MVI Pro handles all Canon C series cameras including the Canon Cinema EOS C300 Mark II.