The UBP-11 900 MHz UHF Wireless Bodypack Microphone Set from VocoPro features four UHF-BP1 wireless bodypack transmitters, four headset microphones, and four lavalier microphones set to frequencies 9I, 9J, 9K, and 9L. The package is ideal for use with VocoPro multi-channel receivers such as the UHF-5800, UHF-5805 and the UHF-8800.

For UHF-5800/5805 and UHF-8800    Frequency 9I, 9J, 9K, and 9L    4 x UHF-BP1 Bodypack Transmitters    4 x Headset Microphones    4 x Lavalier Microphones

Complies with FCC frequency rules

Four UHF-BP1 bodypack transmitters

Four headset microphones

Four lavalier microphones

Related Questions and Answers

Q: 1. Does it record the audio?

A: No, the Movo Photo WMX-20-DUO does not offer built-in recording.

Q: 2. Is it safe to plug the receiver into an audio interface that supplies 48V phantom power?

A: Most audio interfaces that provide 48V phantom power allow for that feature to be turned off, which is what I would recommend when plugging in this system.

Q: 3. Is this transmitter mountable to a camera shoe mount? If so will the audio be sent to the camera directly? I have a Canon 7d and am looking for a mountable lavalier kit to send audio directly to my camera.

A: The receiver is designed to mount to a camera cold shoe. The transmitter is designed to be clipped to the persons belt. There are próducts to adapt the clip to mount to a cold shoe, such as: B&H product SKU # SECA2 and others; basically, you mount this holder to your shoe and then "clip " the transmitter to it!

Q: 4. Can I replace the V-lock plate with Anton Bauer?

A: We feel it is possible to do so. However, it is would be likely to void the warranty. Please contact Freefly to see if they can do the conversion for you. a href= http://freeflysystems.com/contact target= _blank http://freeflysystems.com/contact/a

Q: 5. Does It work with the Tilta Nucleus-M Wireless Lens Control System?

A: The Nucleus-M System won't work with the MoVI Controller/Mimic/Pilot due to the receivers being built into each motor. The only input into the motors is power.

Q: 6. Do they make a cell phone cable?

A: https://www.bhphotovideo.com/c/product/1048152-REG/rode_sc7_trrs_iphone_cable_for.html?sts=pi&pim=Y You can order this cable for connection to smartphones and tablets.

Q: 7. can i use the transmitter connected to a mixer with 3.5mm jack and receive audio into receiver then to dslr directly?

A: Yes you can. NOTE: The input on the transmitter is Mic Level, so make sure that the output on your mixer is set to Mic level otherwise your audio may clip or sound distorted.

Q: 8. What' the sample rate?

A: The manufacturer has not included information regarding sample rate with the system's specs.

Q: 9. HI, I saw a video about the avx system and the guy said that there is interfearence with the mke-2 mic. Does this system do the same, or it makes clean audio with mke-2 lav mic?

A: According to Sennheiser, both systems, the XSW Digital as well as the AVX, are fully compatible with the MKE-2. As for the video you saw, perhaps it was an defective unit. Sennheiser even offers an AVX system that is packaged with the MKE-2

Q: 10. Does the 3.5mm output the two mics on two separate channels? If so, can a TRS 3.5mm to dual XLR do the same?

A: Yes, the dual-channel receiver in the Movo Photo WMX-20-DUO 2-Person Camera-Mount Wireless Lavalier Microphone System can separate each transmitter signal on it's stereo 3.5mm output. A 3.5mm TRS to dual XLR splitter cable would work well to split the receiver's output appropriately for connection to two XLR inputs.