With the TASCAM DR-10X Micro Plug-On Audio Recorder attached directly to your preferred microphone, you can record full-resolution dialog and speech while skipping the trouble of long cable runs and avoiding the confusion of configuring a wireless microphone system. Whether you use a handheld dynamic mic or a battery-powered condenser (both available separately), the lightweight DR-10X can be discreetly affixed to the mic without weighing it down. Thanks to its small, low-profile design, the DR-10X is ideal for news gathering, interviews, weddings, and vlogs where the audio equipment needs to stay out of sight.

Run-and-gun videographers will appreciate its ultra-compact form factor and power-up-and-record workflow for time-sensitive shoots. There's no need to select inputs, arm tracks, or choose channel modes. Connect the DR-10X to your microphone, start recording, and let it roll for the rest of the day. A single AAA battery will keep it running for up to 10 hours, so all-day gigs won't be a problem. Power the DR-10X via USB if you need indefinite operating time for sessions that continue on into the night. Worried about clipping? Don't be. The DR-10X's limiter and auto-level functions work to prevent overloading, while the dual-recording feature makes a safety track at a lower level, just in case.

News Gathering, Interviews, Weddings    For Handheld Dynamic Microphones    For Battery-Powered Condenser Mics    Limiter & Auto-Level Prevent Distortion    Records Broadcast WAV with Safety Track    XLR Input without Phantom Power    Volume Adjustable 3.5mm Headphone Output    Up to 10 Hours via Single AAA Battery    Supports microSDHC Cards up to 32GB    Attaches to XLR-Equipped Microphones

The lightweight DR-10X easily attaches to a handheld microphone for the ideal compact news gathering recording system. A captive XLR connector keeps the DR-10X firmly connected to your microphone, capturing interviews at up to 24-bit / 48 kHz Broadcast WAV resolution. Offload recordings through the micro-USB connection or by removing the microSD card.

Designed for plug-on connection to an XLR-equipped microphone, the DR-10X requires no cables for operation and features a locking mechanism that ensures a secure, stable fit. Since no phantom power is supplied by the DR-10X, it is perfect for use with handheld dynamic mics or battery-powered shotgun condenser mics mounted on a camera or boompole.

Connect headphones to the 3.5mm mini-jack output for simple monitoring of file playback or input while recording. The volume is adjustable via side-panel buttons.

Knowing that filmmakers and videographers often experience sudden audio volume jumps during filming, the DR-10X has several features to prevent distorted audio, and the most secure is dual recording. This feature captures a copy of your signal at a lower level (-6 dB or -12 dB), as a safety track in case of distortion.

You can always monitor the battery level on the easy-to-read OLED display. If the battery runs out in the middle of a recording, the unit will automatically save the file before turning off so your take isn't lost. The case is designed so that the batteries can be changed quickly without detaching the recorder from your microphone.

If the input sound level is too low or too high, an automatic gain control function can increase or decrease the recording volume to an appropriate level. Additionally, the limiter prevents distortion caused by sudden input overloads. These functions save you from worrying about input levels in situations when there is no second chance.

The DR-10X is compatible with microSD cards (up to 2GB capacity) and microSDHC cards (up to 32GB capacity). Record in WAV format for uncompressed audio quality, or use MP3 format for extended recording time on your media card. A 2GB card will yield over four hours of mono recording time at 24-bit / 48 kHz resolution.

A single alkaline AAA battery (available separately) will provide up to 10 hours of recording time at 24-bit / 28 kHz resolution. The DR-10X can be operated on disposable lithium or rechargeable NiMH batteries, or via USB bus power.

The DR-10X has been designed to be small, light, and unobtrusive. Perfect for news correspondents, documentary subjects, or wedding hosts, the DR-10X won't come between you and the perfect shot. Plus, since it weighs just 2.4 ounces with a battery (available separately), your subject will forget it's even there.

The recording switch uses a sliding mechanism to prevent accidental use. In addition, the hold function can prevent recording from being stopped by unintentional contact with a button.

The DR-10X has a built-in clock and supports recording to BWF format, which has time information for improved searching, editing, and software compatibility. In addition to WAV and BWF format files, recording and playback of MP3 files is supported.

• Creates mono or poly WAV files
• Adjustable recording level
• Low-cut filter reduces rumble
• Time track incrementing function can create new files at regular intervals (about every 15 minutes) during recording
• Easy-to-read OLED display
• Micro-USB port enables easy data exchange with computers

Related Questions and Answers

Q: 1. Can I connect my Rode Videomic shotgun mic to the Tascam DR-10L mic input? It also has a 3.5mm, 1//8 connector.

A: Most probably yes. I use the DR-10L with sE Electronics ProMic Laser (search B&H for specs) and they work well together.

Q: 2. I need a line-input recorder to plug into a press box / mult-box ... would this be a good solution for that?

A: That's a great application for the Tascam DR-10X. You just have to make sure to keep and eye on it. It's a very stealable piece of equipment.

Q: 3. How can I monitor audio if someone is wearing the microphone?

A: Or you could hook up a inexpensive tiny Bluetooth transmitter to it and use any Bluetooth headset up to 50-100ft away. Even the person on can could do this. Keep one earbud in.

Q: 4. Any chance that one day we will get one like this designed for lav mics?

A: Likely you can use it for a lavaliere mic if the mic has phantom power and uses a xlr connection. I don't see why it would not work with that combination. I use mine attached to a Sennheiser ME 66/K6P microphone on a boom pole for on-the-street interviews in noisy environments and so far it has worked perfectly. The only hassle is syncing the audio with the video in post but i just have the interview subjects clap their hands once before the start of the interview and that makes syncing much easier and faster. You just have to remember to press the record button twice. I forgot that a few times and missed recording the interview. I also use this set up on a podium when a using a wireless microphone or running cables isn't practical. Worked perfectly each time.

Q: 5. Is the headphones output giving out the signal while it records ? I want to plug an output cable also so the signal goes to the mixer as well amd I thought of using the phones output.

A: Yes. It's a live output while recording.

Q: 6. Would this word with a countryman xlr lav? If not, I wish someone would make a lavalier system that would just record high quality audio from the mic. In today's world of synching in post, it would be far more reliable than a wireless system. Have tried consumer voice recorders but don't get quality I want. And, frankly, it just looks ghetto.

A: The Tascam DR-10x recorder is designed specifically to work with dynamic handheld ENG mics. It is not able to provide phantom power to mics that require it such as the Countryman lavaliers hardwired with XLR connectors.

Q: 7. Why is the sound quality on this WORSE than the internal mic of my Sony A7rIII for distance recordings? I love recorder, but do I need a different mic?

A: The mic that comes with the DR10L is better than the on-board camera mic. It is essentially a copy of a Sennheiser ME2, which is a pretty nice mic. You can upgrade, just make sure that whatever you do upgrade to is wired for Sennheiser (which is the same as this Tascam).

Q: 8. What foam windscreen do you recommend for the DR-10L? And not the Auray WLF-014-3. The WLF-014-3 seems to be too large and stands out.

A: Here's a more form fitting windscreen solution B&H # AUWLMOLM2S.

Q: 9. Does this unit work with a boom microphone?

A: Yes. The microphone must be a dynamic, NOT condensor, as the unit does not supply 48V.

Q: 10. Any way to connect this to an iPhone to record calls or would a person have to place the mic near the phone's speaker?

A: David L.,Sorry, no. It's specifically designed to be used with the lavalier mic.Thank you for your interest in TASCAM products.