The Video Mount Products FP-MLPAB Medium Low Profile Flat Panel Articulating Mount is designed to support most 27 - 42" flat panel screens. With a closed depth of 1.6" and a fully opened extension of 16.4" along with a -2 to +10° tilt, ±3° list adjustment, and ± 45° of rotation, you can get your flat panel to the viewing angle you want for nearly any room. For added safety and security, the mounting rails accept padlocks.

400 x 400 mm mounting hole pattern

Integrated cable management system

Integrated level

55 lb load capacity

Black powder coat finish

Related Questions and Answers

Q: 1. what are the base plate dimensions?

A: The base plate on the ER-148 is 20 x 20

Q: 2. Can this mount be used outdoors on a patio? Is there any wind load rating?

A: The Video Mount Products IBA-1 I-Beam Adapter (B&H # VIIBA1) is technically sturdy enough to withstand outdoor wind conditions, but this item is only designed for indoor use. This mounting hardware is not moisture-resistant and is not recommended for outdoor use.

Q: 3. Will this work with the Epson home cinema LS11000?

A: Epson recommends the Epson CHF4000 Universal Projector Ceiling Mount B&H # EPPCM5040UB MFR # CHF4000. The Premier Mounts Low-Profile Universal Projector Mount (White) BH #PRPDSPLUSW should also be compatible.

Q: 4. What is the depth of the shelf?

A: The depth of the shelf is 15.75". Actual dimensions of the shelf are 19 (width) x 15.75 (depth) x 1.75" (height). The shelf can slide out from a rack like a drawer and then be pushed back flush into the rack. The sliding track allows the entire shelf to pull out so it extends up to 13.8" from the rack.

Q: 5. Any idea what the max load is for this nato rail? I have it on top of my camera cage and I use it with a Nato top handle.

A: Max payload is not listed by the manufacture for this product, but if you tighten the screws provided with the nato rail to the cage, holding 10+ pounds should not be an issue.

Q: 6. Is the panel really 8 rack units?The picture shows a 1 rack unit panel, so I need to know if it is really 8.

A: The Video Mount Products ER-8B is an 8 rack space blank panel. The photo shown is the 1 space version, and is shown for informational purposes only and was provided by the manufacturer.

Q: 7. Will this particular product fit on the side of a Sony FX 30? Looking for vertical video solutions.

A: The SmallRig Low-Profile NATO Rail (2") could mount to either of the FX30's side 1/4"-20 threads, but it needs two threads to provided a sold mounting point, so it would not work well mounting diretly to either side of the camera. If you happen to have a cage on your FX30, then the SmallRig Low-Profile NATO Rail (2") would likely work better as it would have more threads to mount to.

Q: 8. Will this work on square metal poles?

A: Yes, this will work with square poles.

Q: 9. How much weight will this shelf support?

A: Depends on how they are anchored on the wall. If you put the screws into studs my guess is 25 to 30 lbs. The speakers I have on them are about 15 lbs each.

Q: 10. Unfortunately, I have a concrete pillar that's 12 in diameter, which is too big for this product. Can you recommend any other similar items for the same purpose?

A: Sorry, but we were unable to find a pole adapter with that specification. Please email us so that we may be of further help with your application. provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a