The Camvate Super Clamp with 1/4"-20 Threaded Stud with Red T-Handle can be secured to flat or round surfaces up to 2.13" wide and allows you to attach up to 4.4 pounds of accessories. It features five 1/4"-20 threaded holes and a 3/8"-16 threaded hole. It also includes a 1/4"-20 threaded stud that you can screw into one of the 1/4"-20 threaded holes, providing you with a 1/4"-20 threaded stud and thumbwheel for tightening accessories onto the clamp.

You can mount various accessories to many objects around your set, such as to poles or tables. The soft pad on the gripping surface improves grip, while protecting the surfaces you are gripping. The red T-handle is distinctive, making it easy to find in dim conditions. The shape of the handle makes it easy to grip and use in either direction.

Attach Accessories All around Your Set    Secures to Surfaces up to 1.75" Wide    4.4-Pound Load Capacity    Removable 1/4"-20 to 1/4"-20 Screw    1/4"-20 Threaded Hole    3/8"-16 Threaded Hole    Red T-Handle

The threaded stud features a thumbwheel that can be used to add tension and hold your mounted accessory in place so it doesn't twist

Related Questions and Answers

Q: 1. I can't seem to mount it to a Tilta cage for the Panasonic BS1H, Tilta model Tilta TA-T21-FCC-B. Any suggestions?

A: A similar handle option that would work with the Tilta BS1H cage is listed below. Please order both parts. Tilta Tiltaing Right-Side Advanced Focus Handle with Run/Stop (F570, Black) BH #TIARFH57B Tilta Advanced Right-Side Handle Adapter Type IV (Black) BH #TIAAHA4RB

Q: 2. will this clamp onto a square rail or only round?

A: You can use a Superclamp with flat or round surfaces.

Q: 3. Will this adapter hold the Leica geovid 15x56 R rangefinding binos?

A: If there is an area of less than two inches of diameter (probably toward the back of the tube or on the prism) the clamp will hold it. As an alternative, the Berlebach adapter tray; BH# BEBN2AOC is worth a look too.

Q: 4. 14.3 lbs on a 1/4" - 20 ?? Am I the only one who doesn't trust this tiny screw to support a moving camera rig (under stress)? Engineers please weigh in and reassure me.

A: If your camera/device has a 1/4-20, this will handle it. If you look up the tensile strength of 1/4"-20 bolts, you will see figures that are greater than what you can lift.

Q: 5. Will the Small Rig Threaded Side Handle with remote trigger work with the SONY FX3?

A: Yes, the SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger can trigger start/stop on the Sony FX3.

Q: 6. Is this compatible with the Sony A1?

A: The SmallRig 3323 will not work with the Sony A1. The list of compatible cameras is: a7, a7R, a7S, a7 II, a7R II, a7S II, a7 III, a7R III, a7S III, a7R IV, a9, a9 II, a5100, a6000, a6100, a6300, a6400, a6500, a6600, RX100 III, RX100 IV, RX100 V, RX100 VI, RX100 VII

Q: 7. Looking for something similar for Canon (R6) but with no luck , is it just something canon can’t do?

A: A similar grip to the SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger that is compatible with the Canon R6 would be the Kondor Blue Trigger Wing Side Handle (Raven Black), BH #KOKBWSHBK.

Q: 8. does this have any mount points on it? I'd like to mount a wireless monitor on it to view while it is extended.

A: The base of the Manfrotto FAST GimBoom Carbon Fiber (1/4"-20 and 3/8"-16 Mounting Stud) has a 3/8"-16 mounting thread in it's base, so you could mount the monitor to the base of the boom, but that positioning may not be ideal. Instead you could consider using a Impact Super Clamp with Ratchet Handle (BH #IMCC106R • MFR #CC-106R) to clamp around the boom and act as a mounting point for an articulating arm.

Q: 9. is the start stop compatible with the Lumix s5ii. I know its not on the list but is that because the list is out of date?

A: Yes, the Panasonic cable included with the SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger should support the Lumix S5II even though it has not been tested by Smallrig.. Tested cameras list. https://bhpho.to/4aVgiSF

Q: 10. Will this work with Nikon Z8?

A: The SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger will not work with Nikon cameras.