The American DJ Fog Fury 1000 II is a 700W compact, high-output fog machine with a special heating-element design that uses an oil-type transmission throughout the pipeline to prevent clogging and is equipped with a high-performance pump system for optimum output. The Fog Fury 1000 II features a visible fog fluid indicator built into the rear of the unit and an LED heating-indicator system that changes color depending on the state of the heater. The unit produces 4000 cubic feet of fog per minute, has a built-in internal tank with a 0.9-liter capacity, and requires a 4-minute warm-up time. The American DJ Fog Fury 1000 II uses high-quality, water-based fog fluid only and ships with a 9' wired remote control.

For Events, Theater, and Special Effects    Includes Fog Fury 1000 II Fog Machine    700W Heating Element    4000 Cubic Feet of Fog per Minute    High-Performance Pump    Special Anti-Clogging Construction    Includes Eco4L Light-Duty Fog Juice    Creates Fog    Pharmaceutical-Grade Ingredients

• 700W compact, high-output fog machine
• Visible fog fluid level indicator on rear
• High-performance pump for optimum output
• Special heating-element design that uses an oil-type transmission pipeline system to minimize the possibility clogging
• LED heating indicator system in tank: red = heating; green = ready to use
• Fog output: 4000 (ft³/min)
• Warm-up time: 4 min.
• Internal fog fluid tank: 0.9 L
• Single yoke to mount on a wall or from trussing bracket
• Includes on/off wired remote control with 9' (3m) cable
• Power: 120 VAC, 60 Hz
• Uses water-based fog fluid

Related Questions and Answers

Q: 1. Do they fit my Nikon Monarch 3 binocular 8 x 42?

A: Yes, these should fit the Nikon 8x42 Monarch 3 ATB Binocular.

Q: 2. will this head work with Cartoni Two-Stage Tripod SDS System?

A: The 75mm ball on the Sachtler FSB 8 MK II Fluid Head with Sideload Mechanism can mount onto the 75mm bowl on the Cartoni Two-Stage Tripod SDS System.

Q: 3. Is the Manfrotto 501PLONG plate compatible with the Sachtler FSB 6 MK II Fluid Head with Sideload Mechanism?

A: No, the Manfrotto 501PLONG plate is not compatible with the Sachtler FSB 6 MK II Fluid Head with Sideload Mechanism.

Q: 4. Can this be converted to a flat base?

A: yes, you can remove the threaded bolt at the bottom (where you attache the tie-down)

Q: 5. I'm having a hard time finding the difference between the original Ace XL and the Mark II. What are the main differences?

A: The Sachtler Ace XL Mark II Fluid Head is more of a redesign and most features are the same as the ACE XL. The older ACE XL had a payload range of 2-8Kg and the new Ace XL Mk II has a payload range of 0-8kg making it possible to use with very small lighter weight camera payloads.

Q: 6. Will these fit Bushnell Trophy XLT Binocs, 10x42mm (Bone Collector Edition)?

A: Inner diameter is 2 1/16" AKA 52.38mm. Secure fit for Zeiss 10X40B/GA T*

Q: 7. Difference between this and the Activ8?

A: A detailed comparison of both the Sachtler FSB 8 MK II Fluid Head with Sideload Mechanism and the Sachtler aktiv8 Sideload Fluid Head with SpeedLevel & 7-Step Drag for Sachtler Tripods (75mm) can be view at the link below: https://bhpho.to/4aIDdzW

Q: 8. Is the 75mm ball able to come off the head?

A: No, you can't remove the 75mm ball on the Sachtler FSB 8 MK II Fluid Head with Sideload Mechanism.

Q: 9. Does this head come with a mounting plate?

A: Yes, the Sachtler Ace XL Mark II Fluid Head comes with one quick-release plate (mounting plate).

Q: 10. Do they fit Nikon Monarch binocular 10 x 36?

A: I think these will be too loose on 10x36 binoculars. They fit the Nikon monarch 5 8x42.