The single, Adam Professional Audio T-Series T7V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments. The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 7" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 39 Hz to 25 kHz and a maximum SPL of 110 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Professional Audio T7V ships with a power cord.

2 Adam T7V Active Studio Monitors    Passive Monitor Controller    2 Studio Monitor Isolation Pads    2 Balanced XLR Cables    39 Hz to 25 kHz Frequency Response    7" Woofer, U-ART Tweeter    Room Acoustic Controls    Mono and Mute Switches on Controller    Allows Upward or Downward Tilting    Reduces Sympathetic Resonance

U-ART 1.9" Accelerated Ribbon Tweeter

• Allows longer operation with fewer signs of fatigue
• Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

• Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series

• Makes dispersion more consistent and imaging more stable over a wider area
• Reduction of early reflections on the surfaces of mixing consoles, desks, and more

Lightweight polypropylene construction of the woofer

• Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 7" woofer

• High resolution of the stereo image

Rear-firing bass reflex port

• Bass reproduction with very low compression

Linear frequency response of 39 Hz to 25 kHz

• Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 3.3' (1 m) 110 dB

• Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

• Smooth frequency response without interference between the drivers in the critical midrange

Simple room acoustic adjustments via high- and low-shelf filters

• Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

• Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

• Reduction of unwanted reflections on the cabinets

Related Questions and Answers

Q: 1. will I be able to remove the sleeves?

A: No but there is a guy on youtube that knows how to remove the branding with chemicals. The sleeves help for operation and stealth though. Also this might not matter, but I don't mind the branding. But I am a tasteless SoundCloud rapper. jk

Q: 2. What is the length and width of the RODE logo on the sleeves?

A: The RODE logo on the PSA1+ Pro Studio Boom/Arm is about 3.5" long and 0.5" wide.

Q: 3. Can the base be mounted to a 5/8" stud or receiver?

A: The RODE PSA1+ Pro Studio Boom/Arm comes with a compatible flange-mount base so you can choose whether you want to use the clamp or the flange mount. The tip to attach the microphone has a 5/8"-27 thread.

Q: 4. Will this fit on AORUS FI32U 32" 4K SS IPS Gaming Monitor

A: The ViewSonic Monitor Hood for 32" VP Monitors BH #VIMH32S1 is specifically designed for Viewsonic 32'' VP monitors, we couldn't guarantee that it will work with any other monitor on the market.

Q: 5. What's the Length of Desk Mount Screw?

A: The length of the RODE PSA1+ desk-mount grommet screw is about 2" (threaded portion) and about 3" overall (threaded + unthreaded portions).

Q: 6. Can it hold Neat King bee 2 ?

A: Yes, the RODE PSA1+ Pro Studio Boom/Arm can be used with the Neat Microphones King Bee II Large-Diaphragm Condenser Microphone. The PSA1+ can support up to 2.7 lb. and the King Bee II weighs 2.47 lb. As other options for studio arms that can support more weight, you can use the Samson MBA38 Microphone Boom Arm (B&H #SAMBA38) or the Auray BAI-2N Two-Section Broadcast Arm with Internal Springs (B&H # AUBAI2N), which both support up to 5 lb., or the Gator Deluxe Frameworks Desktop Mic Boom Stand (B&H # GADFWDMBS3K), which will support up to 4.4 lb.

Q: 7. Will the charger show when battery is fully charged?

A: Yes it will.

Q: 8. Hows this different from the psa1?

A: The Rode PSA1+ and PSA1 are both two-section boom arms that rotate 360 degrees. The PSA1+ has a maximum reach of 37" horizontally and 34" vertically while the PSA1 has a maximum reach of 32" horizontally and 33" vertically. Additionally, the PSA1+ features an integrated cable management system with external clips and the PSA1 includes touch-fasteners to strap the mic cable to the arm.

Q: 9. How would one go about mounting to/on a c-stand? Any ideas?

A: The RODE PSA1+ Professional Studio Arm is not designed for use with a C-stand. It relies on a stable connection to a desk or table to maintain proper tension for its spring, and mounting it on any type of stand would not be recommended.

Q: 10. Does the Logos are printed on both side or just one side?

A: The RODE PSA1+ Pro Studio Boom Arm features the Rode logo printed on both sides of the sleeve.