Sennheiser Hd 400 Pro Studio Headphones

Sennheiser Ie 400 Pro In-ear Headphones For Wireless Monitoring Systems (smoky Black)

Product Code: ga189624
Availability: In Stock

$1,197.00 $1,843.38

Qty

0 reviews Write a review

Description
Reviews (0)

The Sennheiser IE 400 PRO dynamic, in-ear headphones for wireless monitoring systems offer musicians, DJs, and sound engineers a rich listening experience with clear, studio-like accuracy, when performing in quiet to moderately loud stage environments. With a secure, comfortable fit rivaling custom-molded models for isolation, the IE 400 PRO shields the user from excessive stage volumes and poor room acoustics to deliver punchy sound with transparent midrange.

Made to exacting specifications at Sennheiser's German factory, the smoky black IE 400 PRO features elegant, low-profile housings that are built to survive the rigors of live gigging, while providing a secure, comfortable fit so you can wear them for hours without fatigue. With the IE 400 PRO monitors, you can forget you're even wearing in-ears and feel more connected with your music and the audience, allowing you to perform at your best.

High-Resolution Monitoring for Live Show For Quiet to Moderate Stage Sound Levels Wide Frequency Response: 6 Hz to 19 kHz Detachable, Black, Straight Cable Single Dynamic Driver for Natural Sound Clear and Spacious Soundstage Lightweight Wearing Comfort & Secure Fit Reduction in Ambient Sound: -26 dB Powerful Bass Reproduction Break-Resistant Cable Connection

Key Specs
Wearing Style	Dual Wired Earbud with Behind-Ear Cabling
Number of Drivers	1 per Earpiece
Impedance	16 Ohms
Active Noise Cancellation	No
Built-In Mic	No
Audio Connector	1x 1/8" / 3.5 mm TRS Right-Angled
Included Adapter	1/4" TRS
Headphone
Wearing Style	Dual Wired Earbud with Behind-Ear Cabling
Earpiece Design	In-Ear (Intra-Aural)
Open/Closed-Back	Closed-Back
Sound Field	Stereo
Number of Drivers	1 per Earpiece
Driver Type	Dynamic
Driver Size	0.28" / 7 mm
Impedance	16 Ohms
Active Noise Cancellation	No
Maximum Sound Pressure Level (SPL)	123 dB at 1 kHz / 1 Vrms
Built-In Controls	No
Built-In Mic	No
Connectivity
Audio Connector	1x 1/8" / 3.5 mm TRS Right-Angled
Included Adapter	1/4" TRS
Cable Design	Detachable / Straight
Cable Length	4.27' / 1.3 m
Physical
Color	Black
Weight	0.6 oz / 18 g (with Cable)
Packaging Info
Package Weight	0.69 lb
Box Dimensions (LxWxH)	8.8 x 5 x 2.6"

The IE 400 PRO's SYS 7 driver system withTrueResponse technology features a 7mm single driver that delivers natural and differentiated sound reproduction across the frequency spectrum, eliminating distortion, overlapping frequencies, and feedback peaks associated with multiple drivers.
Even at high sound pressure levels up to 123 dB, the IE 400 PRO reproduce a completely natural, clear, and spacious soundstage with a total harmonic distortion (THD) under 0.08% and a 6 Hz to 19 kHz frequency response for extended low end.

To protect users against ear damage caused by excessive stage sound levels, the IE 400 PRO reduces ambient sound by up to 26 dB. This is achieved by a choice of included ear adapters (S, M, L) made from memory foam, which expands to perfectly fit the ear canal, ensuring perfect acoustic sealing with the added benefit of enhanced bass reproduction.
The TrueResponse driver system delivers precise and detailed sound, so you don't have to turn up the level to hear yourself clearly in the mix, keeping your hearing safe even during long periods of use.

The IE 400 PRO's miniature design permits a lightweight, ultra-compact construction which, thanks to the accompanying silicone and memory foam adapters, can be individually adjusted to fit you perfectly.
The earphones’ sound tunnel has two rest positions to precisely adjust the ear adapters to the depth and structure of your ear canal.
This results in a secure and comfortable fit that comes very close to custom-made ear molds, ensuring that the IE 400 PRO remains secure and comfortable for hours on end.

The headphones come with a 4.27' detachable, black, straight cable that features reinforced ear hooks.
The impressive audio performance of the IE 400 PRO is complemented by an innovative mechanical design, which includes a proprietary cable ducting with the connection inside the ear mold, reducing risk of cable breaks.
The cable's sturdy anti-kink sleeve sits directly on the ear mold, providing a long-lasting solution against the wear and tear that occurs during heavy use.
For easy distinction, the right ear mold has a red ring at its cable connection.

Note: You can upgrade the straight cable to a Sennheiser twisted pair cable (available separately), which provides optimized resistance to structure-borne noise for an even cleaner sound at very high volumes.

The IE 500 PRO delivers a few extra dBs of sound pressure level—which can be crucial on loud stages and in clubs.
Compared to the IE 400 PRO, the IE 500 PRO offers a slightly wider frequency response and added presence in the midrange, allowing artists to localize themselves in the mix more easily.
The cable on the IE 500 PRO features a twisted-pair design for increased resistance to structure-borne noise.
Recommended applications for the iE 400 PRO: quiet to moderately loud musical genres—jazz, blues, acoustic, country, pop, and more.

Related Questions and Answers

Q: 1. Is this compatible with Timecode Systems Timecode Buddy Wifi master as the timecode master source?

A: Both the SyncBac and the Timecode Buddy work on the same ICM band, 865 to 923 MHz RF. It should work as you wish.

Q: 2. Would the HD 280 headset be considered Hi-Fi, or Audiophile quality?

A: Although I'm familiar with the term, audiophile, I am not sure what the qualifiers are for headphones to be describes as such. However, these are tuned flat. That means none of the frequencies are cut/boosted. Most high quality headphones for entertainment purposes have boosts and cuts throughout. Bass boosts are pretty common these days. Flat tuning is desirable if you are in the studio. Mixing engineers need to hear the audio like this. Imagine if you are mixing a song, and your headphones had a bass boost. The final product would only sound right on the headphones you used. It is likely that the bass frequencies would be too quiet when listening with other headphones or speakers that don't have the same level of bass boosted. Flat frequency is like the baseline or foundation. The sound is neutralized. Is this what you are looking for.? Look elsewhere if you are looking for headphones that add a bit of color to the audio.

Q: 3. Is this for 1st or 2nd gen mke 400?

A: The Sennheiser MZH 400 Furry Windshield fits the 2nd generation version of the Sennheiser MKE 400 Camera-Mount Shotgun Microphone (B&H # SEMKE400M).

Q: 4. Does a lens hood come with the Canon 24-240mm lens in the Canon EOS RP kit with that lens?

A: It does not include a lens hood unfortunately. Here it is to be purchased separately. https://www.bhphotovideo.com/c/product/1490988-REG/canon_3685c001_ew_78f_lens_hood.html

Q: 5. Does the SyncBac ensure frame accurate (jam) sync between multiple GoPros, i.e: if this was used for 360-video rigs would all camera shutters fire at the same time?

A: From the manufacturer. The SyncBac PRO enables frame accurate timecode to be embedded directly in the camera mp4 media. The SyncBac PRO does not 'genlock' the cameras in an array however, so the shutters will not be exactly firing at the same time.We have worked with Kolor's AVP software and the have added a really neat 'auto sync to timecode' mode for the camera media clips before the stitch. This feature is on v3.0 onwards. It works really well with fast results & no need to visually ID each take or clap and audio cue for each take.The other real workflow benefit is that using the pulse unit as the master 'mini base station' you can control and configure all the cameras in the rig from our free BLINK hub app - turn ON/OFF, START/STOP, set all resolutions and modes, monitor battery status and SD card status.

Q: 6. Does the SYNCBAC PRO's built-in battery also feed power to the GoPro?

A: Unfortunately no. The 12 hour power supply will remain within the Timecode system.

Q: 7. Detachable cable?

A: no

Q: 8. will this work on the hero 5 aswell?

A: No, the Hero 5 does not have the pin connector on the rear like the 4.

Q: 9. In the basic microphone product pictures, the last picture shows the locking TRS plug terminating to a lightning plug in the iPhone picture. Is that included???

A: No, the cable that is shown in the last photo terminates to a USB-C connector and it is the Sennheiser CL 35 USB-C Locking 3.5mm TRS to USB Type-C Coiled Cable (B&H # SECL35USBC) which is sold separately. Sennheiser does not offer any cables that terminate to a Lightning connector but we do have a compatible Lightning cable that will work which is the Saramonic LC-C35 Locking 3.5mm Connector to Apple-Certified Lightning Output Cable (B&H # SALCC35). The other option for connecting the mic to an iOS device with a Lightning connector is to use the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) together with the TRRS cable that is already included with the mic, which is the Sennheiser CL 35 TRRS Locking 3.5mm TRS to 3.5mm TRRS Coiled Cable (B&H # SECL35TRR).

Q: 10. How long does it take to charge the BA 30 / BA 20 batteries? The USB charging of those batteries takes an extraordinarily long time (4 hours from empty), so I'm wondering if this charger makes it notably quicker.

A: This tabletop charger will charge a pair of the BA 30/BA 10 Battery Packs at 20 C to100 % in approximately 160 minutes (green led)

There are no reviews for this product.