Designed to provide power and protection for servers, voice/data networks, medical labs, and light industrial applications, the SRT1500RMXLA Smart-UPS Battery Backup from APC has been built for customers who want a powerful and efficient UPS with smart management options. Network manageable via serial, USB, or Ethernet, and bundled with Powerchute software for the monitoring, control, shutdown, and energy management, as well as a multi-function LCD status and control console, this UPS provides up to 54.6 minutes of use at 200W, 19.3 minutes of use at 500W, 12.6 minutes of use at 700W, 8.9 minutes of use at 900W, 7.6 minutes of use at 1000W, and 4.9 minutes of use at 1300W.

APC's SRT1500XLA features an output of 1350W / 1500 VA, an input of 120V @ 40-70 Hz (auto sensing), six NEMA 5-15R battery backup outlets, a surge energy rating of 432 joules, double-conversion online topology, and a sine waveform. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty.

Output: 1350W / 1500 VA    Input: 120V @ 40-70 Hz    6 x NEMA 5-15R Battery Backup Outlets    1 x NEMA 5-15P Input (6' Cord)    RJ45, Serial, Smart-Slot, USB Interfaces    LCD Status & Control Console    432-Joule Surge Energy Rating    Recharge Time: up to 3 Hours    Double-Conversion Online Topology    Sine Waveform

Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.

Text and mimic diagrams that display modes of operation, system parameters, and alarms.

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Related Questions and Answers

Q: 1. How long can it power a router and modem for if the power goes out?

A: This unit is rated for a full load runtime of 3 minutes and a half load runtime of 9 minutes. It would depend on the power draw of the items you had attached to the UPS.

Q: 2. Will this be enough for an imac m1 and a lacie d2 hardrive?

A: The BH #CYCP1000PFCL has a 8 minutes at half load rating. Based on the M1 iMacs power draw this should put you in that range of run time.

Q: 3. Will it fit the Shure, wireless microphone for transmitter, ULX1-J1 ?

A: Yes

Q: 4. How much current does the Seagate Backup Plus Slim 2TB USB 3.0 Drive require?

A: This item requires 2V 5A. So any device with USB 2.0, or higher would power this.

Q: 5. What are the benefits of having a UPS with pure sine wave as opposed to a UPS with a stepped approximation to sine wave?

A: For most devices simulated sine wave is adequate. However, if you are backing up a device with an Active PFC (power factor correction) supply they require pure sine wave to operate correctly. Active PFC supplies are considerably more efficient than standard power supplies but need a clean input.

Q: 6. One more question......Will the ClouZen Tanner device connect successfully to a 2TB G-Technology Mobile SSD external drive ?

A: The ClouZen TAINER Portable All-in-One Backup Storage with 2TB SSD (BH #CLTPS2TB), can connect with a 2TB external SSD.

Q: 7. Will this fit a Sennheiser MZH 3042?

A: The microphone capsules (ME-34, 35 and 36) are larger than 1/4" so this foam will not fit. This will fit: Sennheiser MZW34 Velour Windscreen for ME34 and ME35 Microphones B&H # SEMZW34: https://bhpho.to/36yMABp

Q: 8. Did can transfer file directly from Sony a1 via Ethernet port or usb port to this item ?

A: The ClouZen TAINER Portable All-in-One Backup Storage with 2TB SSD does not allow you to transfer images via USB port or Ethernet port from the camera. The images must be transferred via memory card. The Sony A1 does not have a CFExpress Type B memory card slot, so it can only be transferred via SD memory card.

Q: 9. Will this work with the Audio-Technica Pro 70 lav?

A: The Audio Technica Pro 70 lavalier is compatible with the Lavalier Accessory Backup kit - Large.

Q: 10. this only has a usb and I can not put in my Mac pro only has usbC ports I thought it came with that's why I bought it and I can't hook it up to my macbpro 2017 with Touch Bar?

A: The box contents of this item do not state any USBC cables that are shipped with the item. You will need a USBC to USBA adapter to connect.