The 25' WOAP-25 Dual Straight 1/4" TS to Dual Right Angle 1/4" TS Instrument Cable from Hammond features a mega-strand, 20-gauge center conductor, 90% shield coverage and internal noise-rejecting tape. The heavy-duty jacket is designed to survive on-the-road abuse.

20 AWG Center Conductor    90% Shield    Heavy-Duty Jacket

Related Questions and Answers

Q: 1. Will this cable connect the Audient Id4 output to iLoud micro monitor speakers?

A: Yes, the Hosa Technology HPR-005X2 Dual 1/4" TS Male to Dual RCA Male Stereo Audio Cable can be used to connect the outputs of the Audient iD4 MKII Desktop 2x2 USB Type-C Audio Interface to the inputs of the IK Multimedia iLoud Micro Monitors.

Q: 2. Is this a balanced cable?

A: No, the Roland Black Series 1/4" TRS to Dual 1/4" TS Cable is an unbalanced cable.

Q: 3. are these connectors serviceable?

A: All REAN connectors are serviceable, which covers our entire Pro Series line. Best regards, Hosa Support.

Q: 4. Can I use them with my XB3

A: This is not compatible with the XB3.

Q: 5. Is this compatible with the Shure PGX-1 Transmitter? It uses the same TA4F Connector as the WA302, which I know works.

A: Yes, the Shure WA307 Right-Angle 1/4" Instrument to TA4F Cable for Shure Transmitters (3') is compatible with the PGX1 Bodypack Transmitter.

Q: 6. Is this connector balanced, and if not will it pick up ground noise ?, Thank you

A: Un-balanced: The three foot REAN 3.5mm TRS to Dual 1/4 TS Pro Stereo Breakout Cable by Hosa Technology is designed to connect portable audio devices to pro audio gear with unbalanced 1/4 inputs. It's an ideal cable for connecting MP3 players, tablets, laptops and more to professional sound boards and DJ mixers.

Q: 7. They have this same cable but instead of TS with balanced TRS?

A: No, I'm sorry, we do not.

Q: 8. Is it a balanced cable?

A: No it is not balanced. TS (Tip Sleeve) - can never be balanced

Q: 9. Hi Can I use it with my XB3

A: This is not compatible with the XB3.

Q: 10. Will this cable work if I try to connect my Blackmagic Cinema Camera 2.5K or Production Camera 4K to a Zoom H6/Tascam DR-100 Mrk III for in camera audio capture while using these devices as microphones?

A: There are a few things that you'll need to do in order to run audio from a Tascam or Zoom recorder into one of these Blackmagic cinema cameras. After testing, we've discovered the cameras only support a true balanced audio signal. You may use the Hosa HMP-006Y cable to connect from an audio recorder into a line balancer such as the Ebtech LLS-2 (B&H# EBLLS2), at which point the audio signal will be compatible with what the camera is expecting. You would also need two balanced 1/4 cables. With all this said and done, frankly the best audio you will get will be the audio being recorded directly into the Zoom or Tascam recorder. If you plan on using the Blackmagic audio as a scratch audio track for reference, then you may consider moving forward with my suggestions.