This Haida M10 Filter Holder Kit is designed to allow for the convenient use of up to three separately available 100mm wide, 2mm thick filters. It can be fitted on a lens with 67mm front filter threads along with an included circular polarizer.

The kit consists of three main components, an M10 Filter Holder, a filter holder adapter ring, and a drop-in circular polarizer. Pre-installed with two pairs of plastic filter slots, the aluminum alloy filter holder is initially configured to accommodate two rectangular filters. Use of the filter holder can be easily accomplished by first screwing the included filter holder adapter ring onto a lens with 67mm front filter threads. Separately available adapter rings allow the filter holder to be used with lenses that have 37mm, 39mm, 40mm, 40.5mm, 43mm, 46mm, 49mm, 52mm, 55mm, 58mm, 62mm, 72mm, 77mm, and 82mm front filter threads. After being fitted onto the adapter ring, the filter holder's push-and-release locking lever helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, further benefiting the use of graduated neutral density and other filters that are enhanced by varied positioning. To help prevent stray light, which could have unwanted effects on exposure, from coming in-between an installed filter and a connected lens, two gaskets are included along the front of the M10 Filter Holder. These gaskets are positioned so that together, they form a seal between the filter holder's slots.

The M10 Filter Holder also accommodates an included drop-in circular polarizer filter. That filter is mounted within a geared filter ring assembly with an external dial, which allows for the independent rotation of the circular polarizer filter in order to adjust the intensity of its effect. Drop-in neutral density, graduated neutral density, and neutral density polarizer combination filters are separately available. For still images or video captures where a drop-in filter is not in use, a drop-in cover is provided to occupy the filter holder's accessory slot for those filters. The cover then serves to prevent stray light from coming in-between the filter holder and the lens behind it.

An additional pair of filter holder slots is provided, as well as a leather case for the storage and transport of the entire Haida M10 Filter Holder Kit.

For 67mm Front Filter Threads    Holds Filters 100mm Wide, 2mm Thick    Rotates 360°, Push-and-Release Lock    Gaskets for Light-Blocking Seals    Included Drop-In Polarizer Filter    Drop-In Polarizer Rotates Independently    Holds 3 Rectangular & 1 Drop-In Filter    Lightweight Construction    Easy Installation    Leather Case

• Durable, aluminum alloy filter holder connects to lenses with 67mm front filter threads using included aluminum alloy adapter ring
• Holds up to three 100mm wide, 2mm thick filters
• Filter holder easily attaches to the adapter ring using a push-and-release locking lever
• Locking lever provides a reliable, yet adjustable connection that allows the filter holder to be rotated 360°, benefiting the use of graduated neutral density and other filters that are enhanced by varied positioning
• Non-slip coating for a more textured grip when rotating the filter holder
• Built-in gaskets placed along the front of the filter holder further help to ensure that stray light does not come between an installed filter and a connected lens
• Filter holder also accommodates an included drop-in circular polarizer filter
• External dial on the circular polarizer filter ring assembly allows for the independent rotation of the polarizer filter when it is used with the filter holder
• Circular polarizer filter does not disrupt auto exposure or focus features and is constructed from optical glass for clarity
• Each of the polarizing filter's glass surfaces have 10 layers of anti-reflection coatings as well as a nano coating that results in an improved beading effect when the surface comes in contact with water or oil, allowing for more efficient cleaning
• Polarizer filters help to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface, clear up haze in distant landscapes, and provide more saturated, vivid colors
• Leather case for storage and transport

Related Questions and Answers

Q: 1. does the camera remain water proof with this adapter attached?

A: No. The adapter would remove waterproofing.

Q: 2. I want to use this stand to hold a 40 inch reflector outside. I'll have it properly weighted, but my question is how secure will the reflector be if it's breezy?

A: For usage outside, I do recommend using sandbags or some other type of ballast on the base of the light stand. In no breeze or in a light breeze, you should be okay. As with any light or light modifier on a stand outdoors, when used with moderate or strong breeze, it is recommended to have an assistant as well as sandbags to watch the stand for safety/security purposes.

Q: 3. Is it possible to connect both the recorder and a shotgun mic to this grip?

A: The handle grip (with a foam covering) has a male screw on one end & a female screw on the other. So if you attach the recorder to the male screw of the grip, it's possible to attach something else to the female end of the grip (1/4 screw), if you get additional adapters. Another thing you might like is Rycote RY47302 Mic stand adapter, which can attach to a microphone stand. I hope I'm making sense!

Q: 4. Can you use the gels and grid at the same time?

A: The filter and gels for the Godox Standard Reflector with Filter Holder for AD300pro Flash Head are designed to be used one at a time. However, if you force them into place (which may cause damage) they will fit imperfectly.

Q: 5. Does this really fit the RX100 VII?

A: No, the Sony Filter Adapter Kit for RX0, DSC-RX0M2 Cameras is not compatible with the Sony Cyber-shot DSC-RX100 VII Digital Camera. The compatibility chart can be seen below: https://bit.ly/3NRJ4Yu

Q: 6. Is there a trick to getting the grid inside the reflector? The silver rivots holding the label stick out a bit too much and the reflector is just a tad too small.

A: The interior diameter of the outside-facing rim of the aluminum reflector from the Godox Standard Reflector with Filter Holder for AD300pro Flash Head (B&H# GOADR14) product should be just barely smaller than the space needed for the rivets on the outer rim of the grid that comes with it. That's because this product relies on the pressure and friction between the rivets on the grid and the inside of the reflector to hold the two together. While it's not impossible that a particular grid or reflector was made too large or too small, most likely it will just take a small amount of force to unite the two, and if the issue is just the rivets then you can be sure that it was made according to the specifications. The rivets are indeed the contact points between the two, so that aspect is normal. Please feel free to contact us by phone, email, or chat to address any issues.

Q: 7. What's the thread distance on the m10?

A: The thread pitch on an M10 to 1/4-20" Adapter for EclNanoPanel is 1.5mm.

Q: 8. With two of these light stands and a crossbar, can it support background paper?

A: I don't try, but I believe it can hold the bar plus the aper

Q: 9. How would I use 3/8"-16 sockets on side oh handles. It says for tripod mounting but do I need some special adapter to use this?

A: You do not need a special adapter as long as you have a 3/8 connection on your tripod or stand. The 8’ stand included in this kit has a 1/4” -20 stud so if you would want to mount the reflector directly on this stand you would need an adapter such as the Impact CA-109.

Q: 10. What is the diameter of the reflector?

A: With our verniers calipers, we measured the reflector as being 115.54mm / 4.55" in diameter.