The Schneider 82mm True-Net Beige 1 Filter is designed to purposely create a net diffusion effect within an entire scene or image. Embedded inside this filter's glass is a beige-colored stocking material that softens focus and reduces glare, which can be useful for creating a more flattering image of a subject or scene. The stocking material's color can add a warm, beige hue to the entire scene or image while reducing contrast. By applying the Schneider 82mm True-Net Beige 1 Filter instead of pulling a stocking directly over a lens, the desired net diffusion effect can be consistently and reliably obtained by eliminating the risk of overstretching or tearing the stocking material in use.

When the respective film type or white balance setting that corresponds to the primary light source is selected, those combined diffusion, contrast, and color effects can be obtained while this filter is used on a film camera system or on a digital camera system. Film cameras with black-and-white film installed or digital cameras configured to record monochromatic footage or imagery can utilize the Schneider 82mm True-Net Beige 1 Filter's diffusion and contrast effects only.

This filter has a grade of 1. A grade of 2 is also available where this filter type's effect becomes approximately twice as strong.

Schneider True-Net Black Filters that can help maintain a scene's existing color balance and contrast are also separately available. Schneider True-Net Gray Filters that can help maintain a scene's existing color balance but with a reduction of contrast are also separately available.

Net Diffusion with Soft-Focus Effect    Reduces Glare and Contrast    Adds Beige Hue to Color Scene or Image    Water White Glass Construction    Embedded Beige Stocking Material    Consistent and Repeatable Results    1.41x Filter Factor, 0.50 Stop    Plastic Case

• Can be applied to purposely create a net diffusion effect within an entire scene or image
• Filter glass is embedded with a beige-colored stocking material that softens focus and reduces glare, which can be useful for creating a more flattering result of a subject or scene
• Stocking material's beige color can add a warm, beige hue to the entire scene or image while reducing contrast
• Constructed from water white glass for optical clarity
• 1.41x filter factor provides a 0.50 stop exposure reduction
• Plastic case included for storage and transport

Related Questions and Answers

Q: 1. Will this fit a Tamron 11-16mm?

A: The lens will have the diameter marked on it. Lenses I'm familiar with have the pertinent information on the very front on the edge surrounding the front glass or around the front end of the barrel. If your lens is 77mm this cap will fit.

Q: 2. Will there be vignetting if this hood used in the 24-70mm set at 24mm?

A: Yes, it will produce vignette. It is for a lens on a full frame camera that is 50mm or longer. These are better for a 24-70 lens, https://bhpho.to/3pbjYer But best is to get a hood that is actually made for the lens.

Q: 3. Will this fix a Panasonic lumix?

A: There are many Panasonic Lumix lenses and cameras of different diameters. This will fit those that have a 52mm filter thread.

Q: 4. Would fit on a Sekor 180mm, 77mm front diameter?

A: Yes this should fit just about any 77mm threaded lens.

Q: 5. will this 55mm center pinch snap-on lens cap fit canon r10 mirroless camera ?

A: If you purchase the Canon EOS R10 Mirrorless Camera with the Canon RF-S 18-150mm f/3.5-6.3 IS STM Lens Sensei 55mm Center Pinch Snap-On Lens Cap will fit in front of the lens. If you got the Canon R10 with the 18-45mm lens you will need the Sensei 49mm Center Pinch Snap-On Lens Cap instead of the 55mm.

Q: 6. Will there be vignetting if this hood used in the Tamron 18-300mm set at 18mm? If using this hood, I would use a 67-82mm step-up

A: Yes, the Sensei LHR2-T82 3-In-1 Rubber Lens Hood (82mm) will vignette the 18-300 at 18mm.

Q: 7. Will this cap fit my 28-135 Canon kit lens?

A: Yes, this Sensei 72mm cap will fit the Canon EF 28-135mm f/3.5-5.6 IS USM Lens.

Q: 8. If I am using a magnetic filter system, which already has a screw-in lens adapter, while this lens hood still work?

A: The Sensei LHR2-T82 3-In-1 Rubber Lens Hood requires a filter thread to attach to the lens. If the magnetic filter system adapter doesn't have a front filter thread, then this wouldn't be able to screw into it. If your magnetic filter doesn't have a front thread, then you wouldn't be able to screw into that either. If your magnetic filter system does have a front thread, I wouldn't recommend using it because the weight of the lens hood would constantly cause the filter to disconnect.

Q: 9. Does it fit Nikon AF-S NIKKOR 35mm f/1.8G ED Lens?

A: The cap will fit fine if you know the correct size of the lens. If 58mm matches, it should not be a problem.

Q: 10. What, if any, size would fit the Panasonic leica dg vario-elmarit 12 - 60?

A: The proper size in a front cap for the Panasonic Leica DG Vario-Elmarit 12-60mm f/2.8-4 ASPH. POWER O.I.S. Lens is 62mm. One such cap is the Sensei 62mm Center Pinch Snap-On Lens Cap, B&H# SELC62. https://bhpho.to/3i44nXo