The CINEGEARS Ghost-Eye Receiver 1000M can only be paired with Ghost-Eye transmitters that use the same level of encryption and accepts uncompressed, 1080p60, 10-bit, 4:2:2 video from up to 3280' away with less than 1 ms of latency (depending on the transmitter). It operates on the license-free 5 GHz frequency band. Unlike some of the other Ghost-Eye models, in which the "M" figure represents the minimum transmission distance ensured, the 3280' distance of the 1000M is the max distance supported.

The receiver features both HDMI and SDI outputs and is capable of cross-conversion, whereby an HDMI input can be output via SDI or vice versa. Small obstacles in the line-of-sight are compensated for by an adaptive signal logarithm keeping your signal connected. For safety, signals dropped due to interference or loss of line-of-sight are automatically reconnected within 1 ms of the obstacle being removed.

The receiver also features required AES-128 signal encryption and timecode, and it comes with a V-mount battery plate.

Send Uncompressed 1080p60, 10-Bit, 4:2:2    3280' Line-of-Sight Range    Low Latency of <1 ms    Transmitter with L-Series Battery Plate    Receiver with V-Mount Battery Plate    Uses License-Free 5 GHz Frequency Band    Supports 4 Receivers on Each Channel    HDMI/SDI Cross Conversion, Auto-Relink    Adaptive Small Obstacle LOS Compensation    Required AES-128 Encryption, Timecode

• Compatible with any Ghost Eye transmitter with the same encryption level
• Accepts uncompressed, 1080p60, 10-bit, 4:2:2 video from up to 3280'
• Less than 1 ms of latency
• Operates on the license-free 5 GHz frequency band
• HDMI and SDI outputs with cross conversion capability
• Adaptive signal logarithm compensates for small obstacles in the line-of-sight
• Auto-relink
• Required AES-128 signal encryption
• Timecode
• V-mount battery plate
• Plug-and-play installation

Related Questions and Answers

Q: 1. How does the transmitter mount to a camera? We own the Ghost-Eye 600M and it has a 1/4"/20 screw terminals, this has none shown.

A: The most common way the CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Transmitter 1000 and other wireless TX is mounted to a camera is on a cage for the camera and with an articulating arm.

Q: 2. Can the receive receive multiple signals at once?

A: No it can not.

Q: 3. THE KIT CONTAINS 2 ANTENNAS CINEGEARS 5G Cloverleaf? WHAT ARE THE MODELS AND QUANTITIES?

A: In the box with this kit are 7 CINEGEARS Extended High-Range Antenna for 5G Large and Outdoor Projects, B&H # CI6204. The CINEGEARS 5G Cloverleaf Antennas are an additional purchase. B&H # CI63208 is a 2-Pack. https://bhpho.to/2YfCJwJ

Q: 4. Can I use more than one kit at the same time? Planning to have 4 cameras transmitting at the same time.

A: You will be able to use up to four systems simultaneously. Please keep in mind that this systems operates off of a license free 5.1 to 5.9 GHz frequency band. Depending on your location it may be difficult to find 4 open channels to use, this would be true of pretty much any wireless transmission system though.

Q: 5. How far it will transmit when its not a line of sight.?

A: The answer honestly is, it depends. Is the obstruction thin like cloth, or is it sheet rock or is it concrete? The thicker the obstruction, the lower the distance. If you are in a solid, thick concrete box, probably no transmission. If you are in an average wood and sheet rock home, you should be OK.

Q: 6. Can I connect this to two receivers at once?

A: Yes, you can use a 2nd receiver with this system https://bhpho.to/2ZZJynI

Q: 7. Can you buy a receiver sold separately for multiple feeds into one transmitter?

A: Yes, you can. I would choose Teradek instead. Actually, I'm sending this one back.

Q: 8. does the receiver have a np-f970 mount at the back?

A: No, but you can mount one.

Q: 9. Is it include L-serice battery plate ?

A: This kit includes two L Series battery plates.

Q: 10. Do you need the encrypted version in order to be sending timecode?

A: Yes, the encrypted version is required for sending timecode.