This 4K HDR HDMI Compact PoC Extender over Long-Reach DGKat 2.0 is an extender kit for 4K 60 Hz (4:4:4) HDR HDMI 2.0 and HDCP 2.2 signals and 2-way powering over twisted pair cables. The PT-871xr transmitter converts all input signals into the DGKat 2.0 signal. The PT-872xr receiver converts the transmitted DGKat 2.0 signal into an HDMI signal. PT-871/2xr-KIT extends video signals to up to 200' at 4K at 60 Hz (4:4:4) resolution and up to 230' at 4K 60 Hz (4:2:0) 24bpp resolution over Kramer shielded cables.

The PT-871/2xr-Kit extender employs low-level video compression technology that delivers visually lossless performance for 4K 60 Hz (4:4:4) HDR signals with near-zero latency.

Up to 200' at 4K60, 230' at 4K30 (4:4:4)    HDR, HDCP 2.2 Compliance    EDID Pass-Through    Two-Way Powering

Related Questions and Answers

Q: 1. How do you install a custom LUT to this monitor?

A: Install a Custom 3D LUT by saving it with the name USER1, USER2, or USER3 in the root directory of the drive. It must be a .cube file, 17 x 17 x 17, and the data and table order must be RGB.

Q: 2. What other mounting options are there besides VESA? Any way to mount to a C Stand?

A: To mount the Elvid StudioVision 4K HDMI Monitor with HDR (28") to a C-Stand, you will need to use a VESA to C-Stand adapter. Only a custom method will handle any other way of mounting.

Q: 3. Is this monitor's color reproduction good enough to grade on? Looks like it could be a good mobile solution for this..?

A: no it is NOT this is not a reference level monitor and would not be suitable for colour grading

Q: 4. How do you assign custom functions to the function keys?

A: As noted in the manual, under page 9: https://bit.ly/2Vojsx3 To reassign menus to the function buttons, follow these steps: 1. Press and hold the function button until the function select menu appears on-screen. 2. Use the navigation buttons to select the desired function, and press menu to set the change and return to the main view. Press Exit before you accept the change with the Menu button will cancel the action and revert to the previous setting.

Q: 5. Will this fit a Canon 1Dx Mk II with a Tamron 150-600mm with sunshade attached in shooting position? Or at least in reverse?

A: The Kinesis L511 Compact Long Lens Case 500 can accommodate a Canon 1DX II with a Tamron 150-600mm attached while the hood is in reverse.

Q: 6. Does this monitor have any ability to tilt within the frame?

A: The Elvid StudioVision 4K HDMI Monitor with HDR is fixed in the case.

Q: 7. Will this case fit the Nikon 200-500 with tele converter and Z adapter with Nikon body (850 or Z7/9)?

A: Yes. The following unit will accommodate you lens/Cam combo. I would suggest keeping converter in front pocket just for a little wiggle room.

Q: 8. Will this case accommodate an Olympus E-M1X paired with the 150-400mm Pro lens?

A: Yes, the Kinesis L511 Compact Long Lens Case 500 can accommodate the Olympus M.Zuiko Digital ED 150-400mm f/4.5 TC1.25X IS PRO Lens mounted on the Olympus OM-D E-M1X Mirrorless Camera.

Q: 9. wil this house sony a1 + sony 600 mm f4 ?

A: Yes, you will be able to fit a Sony A1 and the 600mm f4.

Q: 10. Would this DC power cable fit the power input on the monitor? https://www.bhphotovideo.com/c/product/1539258-REG/camvate_c2399_

A: Yes, the DC input of the Shimbol M5 display is Inside diameter: 2.1MM; outside diameter: 5.5MM allowing the CAMVATE D-Tap to DC Barrel Cable to be used as a DTAP power cable with the display.