You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Kramer Vm-8ux 1:8 4k 12g-sdi Distribution Amplifier

Kramer Vm-8ux 1:8 4k 12g-sdi Distribution Amplifier
  • Product Code: ga190380
  • Availability: In Stock

$3,264.00 $5,222.40

The Kramer VM-8UX 1:8 4K 12G-SDI Distribution Amplifier is a 4K-compatible DA supporting up to 12G/HD/SD-SDI video signals. This DA unit takes one input, provides reclocking and equalization, and distributes the signal to eight identical outputs. The VM-8UX's data transmission auto-adapts at rates from 270 Mb/s to 12 Gb/s. Signals are supported up to 262' for 12G 4K, 328' for 3G and 6G HD, 656' for 1.5G HD, and 984' for SD video.

Features of the Kramer VM-8UX include power and transmission-rate LED status indicators, BNC connectors, and pass-through of standard embedded audio and ID information/metadata. This fanless, compact DA is compliant with a host of SMPTE standards, which are listed below.

1 x BNC Input & 8 x BNC Outputs    Supports up to 4K (4:2:2) Video    Extends 4K to 262' / 3G & 6G HD to 328'    Embedded Audio & Metadata Pass-Through    Auto-Adapting from 270 Mb/s to 12 Gb/s    Data Rate Status & Power LEDs    Wide SMPTE Compliance    Compact, Fanless Design    Mounting Bracket, 2 Terminators Included

Parameters
Inputs1 x BNC: 12G/HD/SD-SDI, 75 Ohms
Output8 x BNC: 12G/HD/SD-SDI, 75 Ohms
Cable Equalization12 Gb/s: 262' / 80 m
3 Gb/s, 6 Gb/s: 328' / 100 m
1.5 Gb/s: 656' / 200 m
SD: 984' / 300 m

Note: When Using Kramer Cables
Maximum Video Resolution4K, 60 Hz (4:2:2) 30 bpp
Data Rate270 Mbps to 12 Gb/s
Maximum Output Level800 mVpp, 75 Ohms
CouplingAC
Standards ComplianceST-2082 (12G-SDI)
ST-2081 (6G-SDI)
424M (3G/HD-SDI)
344M (ED-SDI)
SMPTE 292M (HD-SDI)
SMPTE 259M (SD-SDI)
Power Consumption5 VDC, 400 mA
Power Source5.2 V, 4 A
EnclosureAluminum
TemperatureOperating: 32 to 104°F / 0 to 40°C
Humidity10 to 90%, RHL Non-Condensing
Dimensions7.38 x 4.53 x 1" / 18.75 x 11.50 x 2.54 cm
Weight17.6 oz / 500 g Approx
Packaging Info
Package Weight2.055 lb
Box Dimensions (LxWxH)13.7 x 6.7 x 2.2"

  • Maximum data rate 12 Gb/s, auto-adapting
  • Broadcast-quality transmission
  • Input equalization and output reclocking supports the digital signal over extended distances
  • BNC connectors
  • Power and input/output data rate LED indicators
  • Compact, fanless form factor can be ceiling or rack-mounted

  • SDI (SMPTE 259M)
  • HD-SDI (SMPTE 292M)
  • 344M (ED-SDI)
  • 3G/HD-SDI (SMPTE 424M)
  • ST-2081 (6G-SDI)
  • ST-2082 (12G-SDI)

Related Questions and Answers

Q: 1. Can I use this to send XLR over Fiber Optical?

A: There needs to be an HDMI signal present first, but then yes.

Q: 2. can this work with a mac pro mid 2010 with Mojave 10.14.6 installed?

A: This Blackmagic Design Decklink Quad 3G-SDI Mezzanine Card for Decklink 4K Extreme 12G is an add-on card for the DeckLink 4K Extreme 12G capture card. This mezzanine card won't work by itself but when added to a DeckLink 4K Extreme 12G card it should work on a MacPro Mid 2010 on Mojave if you have the right driver version installed.

Q: 3. Will this take an analog composite signal from let's say a hi8 (576i) and up convert it to 1080 and up?

A: Yes, you can use this converter to upconvert an SD analog composite signal to 1080 HD-SDI.

Q: 4. Update previous question, Can 3D luts use separately?

A: There are 2 LUTS which may be used but only one applied at a time.

Q: 5. How does it connect with the Apple Pro Display XDR? Thank you.

A: It won't work with it. It takes the input of 4 12G-SDI signals and convert to 4 HDMI 2.0 signals.

Q: 6. Is this compatible with Blackmagic Design ATEM Camera Converter?

A: Yes, it is compatible with the ATEM Camera Converter. You will still need to get the Optical Module Adapter separately.

Q: 7. Does it pass over the Canon or ARRI recording trigger after conversion?

A: No, the DECIMATOR 12G-CROSS 4K HDMI/SDI Cross Converter does not pass recording triggers through the converter at this time.

Q: 8. Will this converter pass HDCP content through to SDI?

A: No, the DECIMATOR 12G-CROSS 4K HDMI/SDI Cross Converter with Scaling and Frame Rate Conversion will not pass HDCP content through it.

Q: 9. Can we use this board to capture 4K 2160p60 SDI using 4 cables? Is there any difference in using BMD SDK when 4K SDI connect with single cable or quad cables.

A: Yes, this product will accept a Quad 3G-SDI signal. A Quad 3G-SDI Signal and a 12G-SDI signal ends up in the end as the same signal, it is just a matter of what the gear you are using this in conjunction with offers.

Q: 10. Can someone recommend a piece of hardware to duplicate xlr audio ? I have two inputs and would like to have 8 outputs to run into these audio injectors since they don't have xlr loop through.

A: You could look at the Behringer DS2800 2-Input/8-Output Distribution Splitter for Commercial Applications, BH #BEDS2800. https://bhpho.to/31kTDhj

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Blonder Tongue 4-program Hd-sdi Encoder

$17,621.85 $23,084.62

Matthews Digital Combo Stand - 11'

$828.00 $1,291.68

Products You May Like

Proaim Wigo Portable Camera Slider (9")

$141.00 $172.02

Lenscoat Bodybag Z (digital Camo)

$99.00 $138.60