The brown Series 8 CO2-8WLp Dual-Element Omnidirectional Lavalier Microphone from Point Source Audio pairs two microphone elements into a single housing to create a sleek form factor and ultra-low-profile lavalier microphone. It can be used to capture audio and offers built-in microphone redundancy for wireless transmitters in live stage, theater, and broadcast applications.

The CO2-8WLp's dual elements are factory matched to a near identical ±0.5 dB difference and both elements are IP57 waterproof rated. The microphone cable splits approximately 9" above the connection to the bodypack to allow for ample room for separation of the transmitters. In addition, the mic is equipped with a 6' cable that terminates with two 3-pin mini X-Connectors for AKG transmitters.

For Wireless Bodypack Transmitters    2 x XAK X-Connector Adapters    2 x Microphone Elements in One Housing    Factory Matched in Frequency/Sensitivity    20 Hz to 20 kHz Frequency Response    Water, Sweat, and Makeup Proof    IP57 Waterproof Rated    Includes Slider Clip    Cable Clip and Windscreen    Interchangeable X-Connector

3-pin mini X-Connectors for AKG transmitters

Two Mics in one—dual matched waterproof elements for built-in redundancy

136 dB max SPL

IP57 waterproof-rated

Optimal gain before feedback

Related Questions and Answers

Q: 1. Does this work with a Sennheiser 1/8" screw down mic?

A: Yes the Tascam DR-10L will work with the same kind of microphone that would be compatible with Sennheiser Evolution series systems that have the threaded 1/8'' TRS connector.

Q: 2. Since this has TRS inputs and Outputs can it be used to transmit and receive a full Stereo signal?

A: No, the Mackie EleMent Wave LAV wireless mic system does not transmit a full stereo signal. The audio is dual mono so you hear the same audio on the left and right sides.

Q: 3. Since this has TRS inputs and outputs, can it be used to transmit and receive a stereo signal?

A: The Mackie EleMent only send and receive mono signals.

Q: 4. I want to use my iphone 8 as a recorder which does not have a headphone jack. I could just use an adapter for that, right? I want to be able to record on my phone and monitor from the headphone jack on the receiver. Can this be set up this way?

A: To connect the receiver of the Mackie EleMent Wave LAV Compact Digital Wireless Lavalier Microphone System for Cameras and Smartphones to the iPhone, implement the included TRS to TRRS output cable alongside the Apple Lightning to 3.5mm Headphone Jack Adapter (BH #APLAADAP): https://bhpho.to/3KpYrG8. The receiver in the EleMent Wave LAV system includes a dedicated headphone jack for monitoring while simultaneously outputting signal to your phone or other device.

Q: 5. Does it come in white for a brides dress?

A: Unfortunately it does not come in white.

Q: 6. What kind of replacement lavs can I buy for this unit?

A: I have used the Rode smart lav on this unit and it works ok, but it doesn't have the locking threads so it popped out as I sat in my chair and I missed a take. Also the sound was different so we went back to the Tuscam Lav. My guess is any lav with the 1/8 male plug will work. Why would you want a different lav?

Q: 7. Im seeing a few reviews about this thing recording a layer of static throughout? Has anyone figured out what causes this? Its the only thing making me worried about purchasing it?

A: Hi there! Ive been using this for professional projects for a while now and have had no issues with it and no static. As a matter of fact its been roughed up a bit sometimes on shoots and it really holds up

Q: 8. If a DJ wants to mic up a pastor for a wedding ceremony with a lav. And I wish to also mic up the pastor for the ceremony with this lav, do I need to worry about interference? I was under the impression that since this records on an SD there should be no interference.

A: No, you should not have any issues with interference while recording with the Tascam DR-10L and another lavalier microphone, whether it is wireless or wired. It is also possible to use two separate wireless lavalier microphone systems at the same time without issues, depending on the frequency band that each system operates within. Please contact us by phone or through live chat on the website if you have additional questions or need further assistance.

Q: 9. The manual says no less than 3 meters between transmitter and receiver. I want to use a smaller distances sometimes. Will it work? What will I get at 2 meters?

A: The manual for the Mackie EleMent Wave LAV Compact Digital Wireless Lavalier Microphone System for Cameras and Smartphones specifies an operation range of 70 meters / 230 feet. A distance of 2 meters between transmitter and receiver is quite suitable for proper operation.

Q: 10. The manual says no less than 3 meters between transmitter and receiver. I want to use a smaller distances sometimes. Will it work? What will I get at 2 meters? I am not concerned about the maximum distance of 70 meters. I am concerned about going below the minimum distance of 3 meters. Please answer with regard to effect of using at 2 meters. Thanks.

A: The Mackie EleMent Wave LAV will work at less than 3 meters between the transmitter and the receiver.