The brown Series 8 CO2-8WLp Dual-Element Omnidirectional Lavalier Microphone from Point Source Audio pairs two microphone elements into a single housing to create a sleek form factor and ultra-low-profile lavalier microphone. It can be used to capture audio and offers built-in microphone redundancy for wireless transmitters in live stage, theater, and broadcast applications.

The CO2-8WLp's dual elements are factory matched to a near identical ±0.5 dB difference and both elements are IP57 waterproof rated. The microphone cable splits approximately 9" above the connection to the bodypack to allow for ample room for separation of the transmitters. In addition, the mic is equipped with a 6' cable that terminates with two 4-pin Hirose X-Connectors for Audio-Technica transmitters.

For Wireless Bodypack Transmitters    2 x XAT X-Connector Adapters    2 x Microphone Elements in One Housing    Factory Matched in Frequency/Sensitivity    20 Hz to 20 kHz Frequency Response    Water, Sweat, and Makeup Proof    IP57 Waterproof Rated    Includes Slider Clip    Cable Clip and Windscreen    Interchangeable X-Connector

4-pin Hirose X-Connectors for Audio-Technica transmitters

Two Mics in one—dual matched waterproof elements for built-in redundancy

136 dB max SPL

IP57 waterproof-rated

Optimal gain before feedback

Related Questions and Answers

Q: 1. Can this also be used to record line in? Say, to record audio coming off a mixing board like at events, etc. Things you do with a regular audio recorder.

A: i wonder the same thing. if you have a 1/8 sennheiser locking cable to XLR, why won't it work ?

Q: 2. I've been told the settings file can be used to configure dual recording to a different level than -6db. However the user manual does not indicate such a setting. Is this possible, and if so what's the correct syntax and valid range of values?

A: Timothy,Sorry but you were told incorrectly.The Dual Record function is fixed at -6dB.Thank you for your interest in TASCAM products.

Q: 3. Will this be available to ship to Canada at some point? It is currently blocked when I try to purchase it.

A: Joseph,Please contact JAM Industries who has been named the new distributor for TEAC Consumer Audio and TASCAM Professional Audio Products in Canada. The firm boasts over 40 years of experience in the consumer, pro audio, and musical instruments markets, with total sales exceeding $400 million across all brands. JAM Industries Erikson Audio division will distribute TASCAM and the Erikson Consumer division will distribute TEAC Audio products.Please contact them directly for all questions regarding TEAC/TASCAM dealers, service centers and product pricing.Erikson Audio (TASCAM): a href= http://www.eriksonaudio.com/ target= _blank http://www.eriksonaudio.com//a(514) 457 2555Erikson Consumer (TEAC): a href= http://www.eriksonconsumer.com/teac.html target= _blank http://www.eriksonconsumer.com/teac.html/a(514) 457-6674Thank you for your interest in TEAC/TASCAM products.

Q: 4. The manual says no less than 3 meters between transmitter and receiver. I want to use a smaller distances sometimes. Will it work? What will I get at 2 meters? I am not concerned about the maximum distance of 70 meters. I am concerned about going below the minimum distance of 3 meters. Please answer with regard to effect of using at 2 meters. Thanks.

A: The Mackie EleMent Wave LAV will work at less than 3 meters between the transmitter and the receiver.

Q: 5. Can I connect my Rode Videomic shotgun mic to the Tascam DR-10L mic input? It also has a 3.5mm, 1//8 connector.

A: Most probably yes. I use the DR-10L with sE Electronics ProMic Laser (search B&H for specs) and they work well together.

Q: 6. Which version is this, V1 or V2, or is it just a firmware/software update?

A: There's only one version of this unit, they have a firmware update that can be done once you purchase the unit.

Q: 7. I want to use my iphone 8 as a recorder which does not have a headphone jack. I could just use an adapter for that, right? I want to be able to record on my phone and monitor from the headphone jack on the receiver. Can this be set up this way?

A: To connect the receiver of the Mackie EleMent Wave LAV Compact Digital Wireless Lavalier Microphone System for Cameras and Smartphones to the iPhone, implement the included TRS to TRRS output cable alongside the Apple Lightning to 3.5mm Headphone Jack Adapter (BH #APLAADAP): https://bhpho.to/3KpYrG8. The receiver in the EleMent Wave LAV system includes a dedicated headphone jack for monitoring while simultaneously outputting signal to your phone or other device.

Q: 8. Is the microphone available to be purchased anywhere seperately

A: Eric H,You can order it from our Parts Department (parts@teac.com).Thank you for your interest in TASCAM products.

Q: 9. I could not stop recording with the stop button. I had to remove the battery to stop recording. It has been happening since day 1 when I bought it. Is it defective?

A: To stop recording, move the side slider back toward REC and hold for about a second to stop recording. Exact same way to start recording stops recording.

Q: 10. Can I jam sync timecode to it ?

A: David,No you cannot.a href= http://tascam.com/product/dr-10l/ target= _blank http://tascam.com/product/dr-10l//aThank you for your interest in TASCAM products.