Rugged and designed for professional use, this etherCON Cat 6a Male Cable Connector from Neutrik lets you repair or create your own network cable runs. The etherCON self-terminating RJ-45 connection is wrapped in a metal housing that's lockable, helping to ensure a solid and secure connection.

Rugged & Lockable Metal Housing    Supports Cat 6a Cabling    For Installation Diameter of DIA    Compatible with etherCON Cat 5    PoE+ 802.3at Type2 Compliant    Chuck-Type Strain Relief

This etherCON connector supports cabling that meet the following standards:

Diameter of 7mm to 9.5mm
Insulation diameter of ≤1.1mm
Wire gauge (solid) from AWG24/1 to AWG22/1
Wire gauge (stranded) from AWG24/7 to AWG22/7

Compatible with existing etherCON Cat 5 devices
PoE+ 802.3at Type2 compliant
Chuck-type strain relief

Related Questions and Answers

Q: 1. Is it possible to attach this to a P-tap adapter to power off of V-mount batteries, and if so which P-tap adapter?

A: We are not of any P-Tap connection which would work with this DC Connector.

Q: 2. So with this converter/adapter, we can put aktiv head to gitzo systematic series 5 75mm bowl? What else I need?

A: Yes, the Sachtler aktiv Bowl Connector for 75mm Tripod (V2) allows for the mounting of the aktiv 75mm Head to a 75mm Tripod system.

Q: 3. What's the barrel plug size?

A: That information is not listed as this is designed specifically to work with the Sigma SAC-7P AC Adapter, BH #SISAC7P. If you have that adapter, this will work with it.

Q: 4. Is this compatible with the Nikon D70 (not D70s)? If not, would anyone be able to suggest the correct cable for D70.

A: No, the Impact 2.5mm Shutter Release Cable II for Nikon Cameras with DC-2 Connector cannot be used with the Nikon D70. The Nikon D70 does not have a wired shutter release port. The camera only works with infrared remotes. As an alternative one can use the Vello IR Selfie Trigger for Select Canon, Nikon, Pentax, and Sony Cameras, BH #VEIRSU (https://bhpho.to/423D7Qp).

Q: 5. Can I use this with the dana dolly aktiv adapter? (https://www.bhphotovideo.com/c/product/1682566-REG/dana_dolly_ddaktiv100adp_100mm_adapter_for_sachtler.html)

A: Yes, the Sachtler aktiv Bowl Connector V2 (100mm) will work with the Dana Dolly 100mm Adapter for Sachtler aktiv10.

Q: 6. How does this work? Does it unscrew from the bottom like a traditional head? How easy is it to swap on and off of a jib/other?

A: No, the Sachtler aktiv Bowl Connector for 75mm Tripod (V2) does not unscrew form the base of the fluid head like traditional systems, instead it works like a clip, which locks the fluid head in place unless the release is activated. The Sachtler aktiv system innovative design that makes adjusting or removing the fluid head a very quick process, ad it was designed with speed and ease of use in mind.

Q: 7. Is this the adapter needed to make the Aktiv8 head work with something like a Dana Dolly?

A: Yes, The Sachtler Aktiv Bowl for 75mm Tripod (V2) is the correct tie down for the Aktiv8 heads. Also make sure you also have the 75mm adapter from Dana Dolly BH #DAKTIV75A

Q: 8. Will this ring work with an Einstein 500?

A: This ring will work with lights made by Paul C Buff.

Q: 9. what is the max DC input voltage ?

A: 9V is the maximum.

Q: 10. Can you monitor the sound through headphones while recording video?

A: Yes, the Godox Geniusmic LT Ultracompact iPhone Microphone with Lightning Connector has a 3.5mm connection onboard for headphone monitoring while in use.