Save your back with the small Easyrig 3 300N Gimbal Flex Vest, optimized for rigs weighing 11 to 17 lb. Designed for female camera operators, this body-worn support system offers the comfort of an overlapping padded belt and is reinforced on the upper chest area for a better fit. The vest's upper part can be adjusted using the integrated hook-and-loop straps and 1.6" buckled bands.

The system works by using a suspension line to support the weight of the camera rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Gimbal Flex Vest, a 300N shock absorber, and a 5" extended top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Designed for Female Operators    Reduces Strain on Arms, Neck & Shoulders    11 to 17 lb Load Capacity    Waist Adjustment: 20 to 31"    Gimbal Flex Vest    Reinforced, Adjustable Upper Part    300N Shock Absorber    5" Extended Top Bar    Carrying Case

• 11 to 17 lb load capacity
• Gimbal Flex Vest with overlapping padded belt
• 5" extended arm
• Compatible with all Easyrig Cinema 3, Easyrig 2.5, and Easy Vario 5 extended support bars
• Standard lockable camera hook (quick release hook available separately)
• Vest and waist belt made of breathable material
• Made in Sweden

Related Questions and Answers

Q: 1. Hello all, will this work with a Axler Robin Pro 40 Stabilizer L?

A: No, this will not work with the Axler Robin Pro 40. The DNA 6000 is configured for a 10lbs load capacity, where as the Axler Robin is capable of carrying 15lbs at it's most. This is not a recommended combination as the place where the Axler is in this setup should always have the lowest weight capacity compared to the vest and arm.

Q: 2. Can we use this with minimax or it was made for larger Easyrigs?

A: The Easyrig EasyTilt Gimbal Tilt Control Kit, will be compatible with any Easyrig models equipped with a Easyrig EA033Q quick release or Easyrig Standard camera hook.

Q: 3. Can we use this with a Tilta Basic Ring for Ronin RS 2? Is the ring wide enough at 24inches?

A: Yes, The Easyrig EasyTilt Gimbal Tilt Control Kit would support and hold the DJI RS2 using the Tilta basic ring.

Q: 4. Will the arm pin fit the Steadicam Steadimate-S Gimbal Collar & Base?

A: Not that we are aware of. This product is not compatible with the Steadimate-S.

Q: 5. I have a glidecam XR pro, will this fit in the gimbal handle? I'm looking at vests that are affordable and this one is in the middle price range. I think the diameter of my XR pro is 22mm (or somewhere really close to that).

A: I have a glidecam HD 4000 and it actually fit perfectly. So if all the glidecam gear has the same size handle then it should work.

Q: 6. Does it work with the crane 3?

A: Yes, you will be able to mount the Crane 3 on to this arm and vest kit. Keep in mind that this kit supports and gimbal and camera set up that weighs between 6 to 13 pounds. The Crane 3 weights around 4-5 pounds and has a 10 pound load capacity. You would need to keep the total weight of the Crane 3 and camera between 6-13 pounds for this to work, which is possible.

Q: 7. Are there any 3/8 threads to screw in eyebolt for use with the kong quick release?

A: Yes, The Easyrig EasyTilt gimbal tilt Control kit mount with the ball stud uses 3/8 threads. So you should be able to use it with a Kong Quick Release.

Q: 8. Will this work with a fairly light rig? I have a Crane 2 and a Pani WFX1 with a small balance weight on the gimbal. I'm sort of upgrade proofing but find even my current rig too heavy for any lenth of time, plus I want rid of the walking wobble ;O)

A: This arm and vest kit works with a set up between 6 to 13 pounds. You will need to weigh out the various components you have to see if they will properly balance. I can tell you that the Crane 2 is the kind of gimbal stabilizer this product is aimed at using and it already weighs close to 3 pounds by itself. So it should be possible.

Q: 9. It is compatible with Tilta Ring Advance tube diameter and the bar is same width too?

A: Yes, the Easyrig EasyTilt Gimbal Tilt Control Kit will adapt to any 30mm tube system as well as the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals.

Q: 10. What are the dimensions of the crossbar? Thanks!

A: The dimensions of the crossbar of the Easyrig EasyTilt Gimbal Tilt Control Kit is 680mm (26.7”).