The Easyrig Vario 5 with Small Gimbal Flex Vest and Standard Arm is a body-worn support system that is adjustable to support camera rigs weighing 11 to 38 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the small Gimbal Flex vest, a Vario 5 standard support bar, and a standard support arm.

Designed for female camera operators, the Gimbal Flex vest offers the comfort of an overlapping padded belt and is reinforced on the upper chest area for a better fit. The vest's upper part can be adjusted using the integrated hook-and-loop straps and 1.6" buckled bands. A carrying bag is also included for convenient storage and transport of the Easyrig system.

11 to 38 lb Load Capacity    Reduces Strain on Arms, Neck & Shoulders    Adjustable Line Tension    Small Gimbal Flex Vest    Standard Arm    Carrying Case

• 11 to 38 lb load capacity
• Adjustable line tension for different cameras and configurations
• Lockable camera hook
• Vest and waist belt are made of breathable material
• Made in Sweden

Related Questions and Answers

Q: 1. Is this compatible with the Glidecam XR-Pro?

A: The Glidecam XR-Pro needs and arm with a 5/8" post, so would not be compatible.

Q: 2. Does this work with the DJI RS4 Pro stabilizer?

A: The Proaim Gimbal Brace Mount for DJI Ronin-S/Zhiyun CRANE-2 & Stabilizer Vest Arm is not listed as compatible with the DJI RS4.

Q: 3. Will this work with the DJI RS2?

A: Yes, it will work with DJI RS2.

Q: 4. Would this support the flycam Zest stabilizer ?

A: No it wil not be compatible. Use this combination: FLYCAM Zest with Vista-II Arm and Vest BH #FLSTVSTAZEST https://bhpho.to/3yxG8tz

Q: 5. Will this work with a fairly light rig? I have a Crane 2 and a Pani WFX1 with a small balance weight on the gimbal. I'm sort of upgrade proofing but find even my current rig too heavy for any lenth of time, plus I want rid of the walking wobble ;O)

A: This arm and vest kit works with a set up between 6 to 13 pounds. You will need to weigh out the various components you have to see if they will properly balance. I can tell you that the Crane 2 is the kind of gimbal stabilizer this product is aimed at using and it already weighs close to 3 pounds by itself. So it should be possible.

Q: 6. How well does this work with the Smallrig 3953 (Wireless Control Ring for DJI RS 2/RS 3 Pro)?

A: The Easyrig EasyTilt Gimbal Tilt Control Kit, should work well with the Smallrig 3953 and other similar ring systems.

Q: 7. It is compatible with Tilta Ring Advance tube diameter and the bar is same width too?

A: Yes, the Easyrig EasyTilt Gimbal Tilt Control Kit will adapt to any 30mm tube system as well as the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals.

Q: 8. So you are advising us if we own a Steady Cam solo not to buy this Vest and Arm? BEST ANSWER: This arm and vest kit is made for the DNA line of Glide Gear stabilizers. You might be able to use other systems with it, however we do not advise it. The DNA 5050 would work very well on this unit.

A: For for Steadicam-type stabilizers, we suggest keeping the vest, arms and sleds in the family since they are all meant to work together. This is easier for those operators starting out. Now historically, the Steadicam, the invention of a tinkerer, has always engendered mixing and matching and moding. If you wish to do so, you are of course free to do what you wish. However, since the permutations are endless, we cannot vouch for the efficacy of what ever combination you are considering.

Q: 9. Can we use this with a Tilta Basic Ring for Ronin RS 2? Is the ring wide enough at 24inches?

A: Yes, The Easyrig EasyTilt Gimbal Tilt Control Kit would support and hold the DJI RS2 using the Tilta basic ring.

Q: 10. Does this work with the Zhiyun Crane gimbal?

A: Unfortunately no.