Suitable for studios, mobile trucks, staging, and other applications, the Canare Mini RG59 12G-SDI / UHD 4K Micro BNC to Micro BNC Cable is capable of carrying up to a 12G-SDI UHD 4K signal up to 190'. It can also be used for HD-SDI, 3G-SDI, and 6G-SDI applications. The cable is terminated with 75-Ohm connectors featuring a nickel body and gold-plated contacts.

Carries 12G-SDI UHD 4K Signal up to 190'    Also Suitable for HD/3G/6G Applications    75-Ohm Nickel Body Connectors    Gold-Plated Contacts    21 AWG Solid Annealed Copper Conductor    91% Tinned Annealed Copper Braid Shield    Highly Foamed PE Insulation

• Terminated with Canare 12G 75-Ohm connectors
• Carries a 12G-SDI UHD 4K signal up to 190' (SMPTE ST2082-1)
• 21 AWG solid annealed copper center conductor
• Highly foamed PE insulation for great attenuation characteristics
• Copper laminated tape outer conductor 1
• ≥91% tinned annealed copper braid outer conductor 2
• Nickel body and gold-plated contacts

Related Questions and Answers

Q: 1. Will this work when sending an output feed from a Blackmagic Design Teranex Mini SDI 12G Distribution to this converter then using the hdmi out to a mointor?

A: Yes it can as long as you are sending a video resolution/ frame rate that is supported by the 3G SDI standard.

Q: 2. Would this device work to connect a Pocket 6k via HDMI to a Live U mobile unit that only has SDI (for live broadcast)?

A: Yes the Black Magic converter would work. It would be HD only. The Pocket cameras only output in HD. Also please note the Blackmagic Design Micro Converter HDMI to SDI 12G requires a power supply to work.

Q: 3. Can this be used as a graphics overlay insertion tool for key and fill?

A: The Blackmagic Design Micro Converter HDMI to SDI 3G cannot be used as a graphics overlay insertion tool for key and fill.

Q: 4. What will happen if I input a 12G SDI signal in it? Will it recognize the signal and downscale to 3G? Or it won't recognize the signal at all?

A: NO IT WILL NOT. Anything above a 3G. for 12G sdi standards please look at the 12G sdi options available from Black magic design

Q: 5. This connector has 9 pins and the micro studio cam has a 15-pin serial connection. Question is, where does this cable connect on the micro studio cam? How is it used?

A: The 9 pin connector on this cable connects to the 9 pin connector on the expansion break out cable supplied with the camera.

Q: 6. Does the Teranex Mini scale output? I’ve seen answers that range from “no” to “it will scale resolution, but not framerate” to “it scales both resolution and framerate.”

A: No, this Teranex Mini model doesn't scale the output.

Q: 7. can this be installed into a macbook pro?

A: This cannot be installed in a Macbook Pro.

Q: 8. I want to connect my hdmi monitor to an ursa that only has sdi connections, is there a holder that can be bought to mount?

A: There is no mount for the Blackmagic Design Micro Converters, but most often people are using Velcro or a clamp. Also, make sure you get the SDI to HDMI 12G converter. This one is going in the opposite direction for what you need.

Q: 9. I'm just looking for verification on if this would work. I need to split an SDI signal into SDI and HDMI. So it would be Source SDI - audio converter device - bidirectional SDI input - SDI output to capture card.... HDMI output - monitor. It's a weird situation and

A: You could use the Blackmagic Design Micro Converter BiDirectional SDI/HDMI 3G to split an SDI input into HDMI and SDI outputs.

Q: 10. Can you use this to take an output feed from a Blackmagic Design Teranex Mini SDI 12G Distribution and use the hdmi to send it to a monitor?

A: yes you can as long as the teranex mini is outputting a resolution/frame rate that is supported by the micro converter.