The Neutrik NZP1RU-12 Angled Rack Panel with Twelve D-Shaped Cutouts protects the installed receptacles against the ingress of dirt and water in demanding environments by angling them downward 30 degrees. The panel offers twelve D-shape cutouts with M3 threaded fastening holes.

Angled 30° to Keep Dirt & Moisture Out    12 x D-Shaped Cutouts on 19" Panel    M3 Threaded Fastening Holes

Related Questions and Answers

Q: 1. Does this scope have image stabilization capability

A: The ZEISS Victory Harpia 23-70x95 Spotting Scope and all other current spotting scopes do not have IS. The magnification of a spotting scope is too much for current IS systems to handle.

Q: 2. Is this good for target shooting spotting scope 50ft to 100 yards? Which lens mm works?

A: Yes, the Kenko Lens2scope Adapter for Nikon F Mount (Angled View), is good to create a target shooting spotting scope. the 200-500mm Nikon lens would be one of the best for 100 ft., or a 70-300mm one for 50 ft. https://bhpho.to/3VPMwHw https://bhpho.to/3VPMMX0

Q: 3. Are there adapters for digiscoping w/ a Nikon DSLR (D750, perhaps)?

A: Yes you will need a T Mount for your camera for digiscoping. This is the B&H part number for the T ring for your camera, B&H#KOTMN. When you get the T ring home before you can start digiscoping. You will need to take the lens off your camera and screw the T ring in it's place. The only other thing you will need is an adapter for the telescope you are using. The adapter will depend on the telescope you have. After you get the correct adapter attach it to the telescope and screw the camera onto the adapter. Then start shooting.

Q: 4. What is the specific name/part no. for the replacement 3M filter? I can't find it on their website.

A: This came from Rob K, B&H: Our buyer just gave me the bh number for it,BH # FUFL001It is not in the system yet but should be soon.

Q: 5. Can the eyepiece be taken off, add a T mount adapter and then attach a Canon D70?

A: Unfortunately the eyepiece cannot be taken off this Lens Scope Adapter. My apologies. That will not be possible.

Q: 6. Can I use use this on SONY FE camera with Canon EF to SONY FE adaptor mounted? Will it be effective?

A: That combination is unsupported, meaning the manufacturer has not stated such a combination is advisable. So if you attempt using that way, no warranty is in effect. Finally, it is for a Nikon F mount, not Canon or Sony.

Q: 7. Overview states it turns a 100mm lens into a 1000mm spotting scope. Shouldn't it turn a 100mm lens into a 10mm spotting scope?

A: You need to divide the focal length of the lens by the focal length of the eye piece.100mm lens divided by 10mm eye piece = 10 mm spotting scope.600mm lens divided by 10 = 60 mm If yo add a 2X converter to the lens it would double the spotting scope magnification

Q: 8. Do they make an e mount ?

A: The Kenko Lens2scope Adapter for Sony Alpha Mount (Angled View) is not available in an Sony E mount.

Q: 9. How is it powered?

A: The Fujin is powered through powered by four AAA batteries. They are not included.

Q: 10. Is the image correct both vertically and horizontally? I am concerned that the image might appear flipped left-to-right.

A: The image does not change. It is correct both vertically and horizontally.