The iDEA VISION SpiderMount 220 Basic Kit is a lightweight, flexible articulating suction cup mounting system that features an active pump for secure mounting. It is well suited for mounting cameras, gimbals, and lights, or as a foundation for more complex rigs. It features a unique joint design that allows it to wrap around edges and corners and mount on all smooth surfaces including windows, cars, walls, and more.

The SpiderMount 220 features a footprint with a nominal diameter of just under 19", but it can adapt to working on the overhang of surfaces, such as when mounting two of the arms to the hood of a car while the third leg mounts on the side. A variety of threaded mounting holes runs along each arm, providing attachment points for accessories or safety lines. The included vacuum pump runs off 11 to 30 VDC, and can be powered by a car lighter adapter or a standard cine-style battery.

Active Vacuum Mount Rigging System    Three Suction Cups Support up to 220 lb    Articulating Joint Design    1/4"-20, 3/8"-16, M8, and 16mm Mounting    Vacuum Pump Supports 11 to 30 VDC

Locking levers permit the SpiderMount 220's arms to pivot and articulate when loosened, and then hold fast when the levers are tightened.

Three suction cups carry a maximum payload up to 220 lb, depending on the application and configuration.

The SpiderMount 220 can be mounted on smooth surfaces either horizontally, vertically, or over an edge.

Threaded accessory mounting holes are integrated into each arm of the SpiderMount 220. These holes include 1/4"-20, 3/8"-16, M8, and 16mm.

The vacuum pump system can be powered from a variety of 11 to 30 VDC sources including a V-Mount battery or car lighter socket using the included cable. A D-Tap to 3-Pin XLR cable (not included) will allow you to use batteries/power sources with a D-Tap to power the pump.

Related Questions and Answers

Q: 1. what are the specs, what's in the box?

A: The specifications on the FL120i,Flash Power:120 watt SecondsGN with ASA 100:1/500-1/1000 at full powerRecycling Time:2 seconds at full powerModeling Light Power:60 Watt MaxTriggering:Slave, PC Connection or Test ButtonMain Supply:AC 100-130v / 60 HzBeam Spread:55 DegreesColor Temperature:Approximately 5600KMount:3/8 to 5/8 Universal with Integral umbrella mountDimensions of the head:3.75 x 7.87Weight:1.7 lbsThe kit comes with: 3 flashlite 120i monolites, 3 60 Watt Quartz modeling lamps, 3 sync cords, 3 Raven RS8 8 light stands, 2 PGSB 10 square softboxes w/Speedring, 1 MB110 Mini Boom-Arm and Soft Travel case.

Q: 2. Will this work with the Sony FX9?

A: Yes, the SmallRig Basic Shoulder Kit will work with the Sony FX9.

Q: 3. How does the sync cord connect? I have an older Nikon D3100 DSLR. Can I use the flash on my camera to trigger the optical slaves?

A: To connect these strobes to a Nikon D3100, you would need an adapter such as the Nikon AS-15 Sync Terminal Adapter (Hot Shoe to PC) B&H # NIAS15, which accepts a sync cable in front. https://bhpho.to/2j2xq0e

Q: 4. Is there room to add a v-mount battery plate in the back?

A: You can reposition the 15mm rods to attach a V-mount battery plate at the back of the Smallrig Basic Shoulder Kit.

Q: 5. Will this work for a basic Sony FS5 setup?

A: Yes, the SmallRig Basic Shoulder Mount Kit could work with the Sony FS5 Cinema camera. More Sony FS5 shoulder mount options: https://bhpho.to/44NtUwU

Q: 6. Can this support the red komodo?

A: The SmallRig Basic Shoulder Mount Kit will support the RED Komodo.

Q: 7. Will the Smallrig LWS Universal Lens Support fit on this?

A: Yes, the Smallrig LWS Universal Lens Support is designed to fit onto ANY 15mm rods, so the SmallRig Basic Shoulder Rig Kit will indeed accommodate it.

Q: 8. does this work with the GH6?

A: Yes, the SmallRig Basic Shoulder Mount Kit is compatible the Panasonic Lumix GH6 Mirrorless Camera.

Q: 9. Can someone recommend a riser that would work with this camera plate and a RED Komodo?

A: One such riser that would work with the SmallRig Basic Shoulder Mount Kit, in order to rise up a RED Komodo Camera (as well as many other cameras) on the rig, would be the SHAPE Paparazzi Riser. https://bhpho.to/43AK24t

Q: 10. Will this be compatible with a Sony A7II?

A: Yes, this shoulder rig is compatible with the Sony A7 II.