The Bescor XT96 5600K On-Camera Light is an on-camera, dimmable, daylight-balanced 5600K LED light designed to combine bright output with a compact form factor. The compact and lightweight light features 10-100% dimming.

Powered by either one NP-F battery or an optional AC power adapter, the unit's 96 LED bulbs produce a bright beam with a rating of 687 lux at 3.2 feet. Suitable for both video and DSLR cameras, the XT96 includes a clear filter for softening glare, a blue filter to further cool the light to 7500K, and an amber correction filter to warm the light to 3200K for shooting indoors.

5600K Daylight-Balanced On-Camera Light    10-100% Dimming    Blue, Orange, and Clear Filters Included    7.4V 2200mAh NP-F Battery    Battery Charger    12 VAC, 2A Power Adapter    Power Cord Attached

LED technology offers lamp longevity, low power consumption, daylight-balanced illumination, and never gets hot to the touch.

This light utilizes one NP-F battery and can also run off AC power with an optional 12 VDC/2A adapter.

The XT96 offers 96 individual LEDs for a wide beam.

Dimmable from 100 to 10%.

The included blue 7500K filter helps cool the image for outdoor shooting, the 3200K amber filter provides a softer, more natural lighting effect, and the clear filter helps smooth and even out the light's tone while reducing glare. Filters are easily removed from the unit's housing by sliding them in and out of the built-in filter holder.

Related Questions and Answers

Q: 1. Can this charger be used to charge Blackmagic NP-F570 Batteries? Also, does this charger charge the batteries simultaneously?

A: Yes this charger will charge The Blackmagic NP-F570 battery Yes this charger charges both batteries simultaneously.

Q: 2. I have a HDR-XR500 Camcorder which is using NP-FH60 or NP-FH70. Will this NP-F970L battery work on my HDR-XR500? Thank you very much for your help and reply back onto this question.

A: Sorry, no, the NP-F970L will not work with your camcorder. It is a large battery that is almost as big as the HDR-XR500 itself. Sony no longer makes the batteries the HDR-XR500 uses. However, we have two 3rd party batteries that will work. Here is the one of the two I recommend because it is the larger capacity. Watson NP-FH70 Lithium-Ion Battery Pack (7.4V, 1750mAh) B&H # WANPFH70

Q: 3. Will this battery work for the 7 inch monitor

A: Depends which 7 monitor you are talking about and if you have the appropriate battery plate. I have used this battery (with the right battery plate) to run a SmallHD AC-7 OLED and a Convergent Designs Odyssey 7Q. Battery life is variable - but with the AC-7 I could get 3-4 hours.

Q: 4. Is this compatible with the Lowell idLight?

A: I found that the battery pack was not able to run my 100 watt halogen camera light at its maximum brightness, but was able to run it at about 60% of its brightness. This battery pack is very light and small, compared to my old lead acid battery pack that was very heavy and cumbersome. I would highly recommend this battery pack for operating a 50 watt halogen camera light.

Q: 5. Can this replace a Sony NP-F570 battery?

A: The NP-F570 and NP-F970 are part of the same battery system. Just as long as what you are using it in has enough room to handle the larger sized battery it will work.

Q: 6. Is it work for GVM lights 800 D RGB ?

A: Yes, they would definitely work. However run time would be limited.

Q: 7. Hello there, how are you? I would like to buy the Bescor 2200mAh 7.4V NP-F Battery kit to use on my Genaray Torpedo Bi-Color LED 3-Light Kit. Is it the rqigth battery for my led? Thank you

A: These batteries are compatible with your lights, however, they are low capacity you may want to purchase larger capacity batteries (such as NP-F770s or NPF-970s that have 4400 or 6600mAh capacity) as they will last much longer.

Q: 8. Can I use the original Nikon EP-5B with this?

A: Yes. The following adapt will work.

Q: 9. is this battery works with Sony HDR SR11?

A: No. You will need the V series batteries

Q: 10. Hi does this works with Canon R3 ?

A: Yes the Bescor LPE19D & DRE19X AC Kit is compatible with the Canon R3.