Get infrared and white-light illumination from a single two-in-one solution with the 850nm VARIO2 IP PoE hy4-1 Medium-Range Hybrid Network Illuminator from Raytec. Equipped with six semi-covert 850nm IR LEDs and three white light LEDs, the VARIO2 IP PoE hy4-1 provides up to 427' of IR and 230' of white light illumination to help night vision cameras produce clear images in a variety of surveillance scenarios. The unit's interchangeable lens system with HRT is designed to deliver even illumination without causing overexposed white spots. Three lenses are included, a 10 x 10° circular, a 35 x 10°, and a 60 x 25° lens.

The hybrid illuminator can be integrated into an IP network for convenient remote control. PoE technology simplifies installation, enabling you to run a single cable for both data and power. Suitable for outdoor use, the illuminator is housed in an IP66-rated weather-resistant enclosure.

850nm IR & White Light Illumination    Up to 427'/230' IR/White Beam Range    Three Interchangeable Lenses    10 x 10, 35 x 10 & 60 x 25° Angles    6 x Semi-Covert IR & 3 x White LEDs    Hot-Spot Reduction Technology    Integrated Web Interface    Runs on PoE or 24 VDC    U-Bracket Included for Installation    IP66-Rated for Outdoor Use

The illuminator allows for remote control via a network connection, simplifying setup, operation, and maintenance.

This fully integrated hybrid unit combines the functions of an infrared and a white light illuminator. IR illumination allows night vision cameras to produce clear B&W images in complete darkness. The white light can be used to deter intruders and/or to capture color video in otherwise dark environments.

The integrated web interface facilitates response to live events in real time, allowing you to control lights individually or in groups. It also provides a host of advanced programmable settings and diagnostic tools.

The web interface's user-defined settings enable you to tailor the illuminator to the exact demands of your installation.

The VARIO2 IP provides a dedicated API for seamless integration into 3rd party technology platforms such as VMS, BMS, and access control systems.

HTTP commands can be used to control the VARIO2 IP illuminator from any network-enabled device.

PLATINUM Elite SMT LED technology allows the VARIO2 IP Hybrid illuminator to deliver the full performance of both an infrared and a standalone white light illuminator in a single solution.

The angle of illumination can be easily, quickly, and precisely adjusted by changing the VARIO holographic lens insert to match your camera's field of view.

Hot-Spot Reduction Technology (HRT) produces a highly diffused, elliptical beam to deliver more light where it is needed, maximizing the illumination range and minimizing light wastage. HRT also prevents overexposure of foreground objects.

Related Questions and Answers

Q: 1. Will the LiDAR work with the Sigma Art Lens 18-35, which is mechanical, but has no hard stops?

A: If you are using the non-cinema Sigma 18-35mm lens, you will need to use the focus gear ring that comes with the focus motor.

Q: 2. Is this compatible with the Ursa 12 K Pro?

A: No, the DJI LiDAR Range Finder for RS 3 Pro is only designed to function and work with the DJI RS3 Pro gimbal. However, there are users out there that have been able to use the DJI Lidar and lens motor off gimbal. This setup has many limitations, but it would allow you to use the Lidar with cameras like the Black Magic Ursa.

Q: 3. How should this lidar be wired to work with the Focus Pro Grip? It says its compatible with the latest firmware

A: The DJI Focus Pro Grip (BH #DJFPG) connects to the DJI Focus Pro LiDAR via USB-C.

Q: 4. Wich lenses can the rangefinder interface directly connect to via 4-pin lemo to not need to calibrate the lenses? Would Cooke /I and Zeiss/XD work via 4-pin lemo port?

A: So far, these are the lenses that have been announced as working with the DJI LiDAR Range Finder for RS (B&H# DJRSRF) without calibration, and none other: DZOFilm VESPID Cyber Full Frame 35mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC03521) DZOFilm VESPID Cyber Full Frame 50mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC05021) DZOFilm VESPID Cyber Full Frame 75mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC07521)

Q: 5. can i use this with my fuji xt3 camera?

A: The DJI LiDAR Range Finder for RS will work with many camera models including the Fuji XT3. You need to add a DJI RS3 Pro Gimbal with the focus servo to control your camera lenses. DJI compatibility https://www.dji.com/support/compatibility/rs-3-pro/xt3 Gimbal - https://bhpho.to/3tWI6Tm

Q: 6. Is this compatible with dji rs2?

A: At present time, the DJI LiDAR Range Finder for RS (B&H# DJRSRF) is only compatible with the DJI RS 3 Pro Gimbal Stabilizer (B&H #DJRS3P) and there has not been any announced intention to make it work with any other gimbal(s) as of this time.

Q: 7. Is there way to control active track pro via lidar from the DJi high bright monitor?

A: Yes, DJI Transmission to a High-Bright Monitor supports LiDAR focusing. DJI Master Wheels and other DJI PRO ecosystem products are also supported. You can learn more here: https://www.dji.com/transmission https://store.dji.com/product/dji-transmission-combo?vid=116751

Q: 8. Will this be released as a standalone autofocus system you can put on any camera?

A: This product is a part of the DJI Ronin 4D system it is not capable of working with any other camera system at this time. Only DJI can confirm/deny whether or not they plan to develop new products to work with other camera systems.

Q: 9. Doesn't this come with the base 4D camera? If it's only compatible with the 4D and comes with it, why is it sold separately?

A: The DJI LiDAR Range Finder is offered separately since it is a very important component of the 4D system. This allows the user to have a back-up or a replacement for one lost or damaged.

Q: 10. How do I connect my new LiDAR range finder AND my RavenEye transmitter so they work at the same time?

A: The DJI LiDAR rangefinder at this time does not support working with the RavenEye image transmitter.