Remotely control power to two pieces of equipment with the Lowell Manufacturing RPC-15-S Remote Power Control. It plugs into one 125VAC socket and provides two outlets that can be powered on and off by your control system. Indicator LEDs and a test switch help you quickly check the status of your setup.

Surge Protection up to 20,000 A, 400 V    20 dB at 100 kHz Noise Suppression    Two Remotely Controllable Outlets    Test Switch and Indicator LEDs

• Steel chassis with powder epoxy finish
• Virtually zero ground contamination
• Low-voltage design for safety
• Suitable for use in commercial, entertainment, government, education, and house-of-worship environments
• Test switch, receptacle power-indicator LED, AC power-indicator LED, and surge-protection indicator LED

Related Questions and Answers

Q: 1. What is the small switch on the back of the remote used for?

A: The switch on the back of the Canon RC-6 is for the delay function, which can be set for either 2 or 10 seconds.

Q: 2. i have a canon Mark II.. um.. how do i sync or use the remote with my camera??? thanks!

A: The remote is compatible with the 5D Mk II camera. If you have a different Mk II model please indicate which specific so I can further research the compatibility. For the 5D MK II camera, the camera's instruction manual details how to set up the use of the remote control on page 102. Access the AF-Drive button on the top of the camera and select the remote control option there. See the following link to the manual on our website for details:http://cdn2.bhphotovideo.com/lit_files/101.pdf

Q: 3. Can this remote start recording videos?

A: Yes it does. I use this remote to start and stop recording videos with my 5DM3 and 5DM4 when they are mounted on my DJI Ronin. Don't forget: in your camera settings, go to Drive Mode , then select Self-Timer:2sec/Remote

Q: 4. I can't make it work with the EOS utility tool on my laptop in the live view mode with the studio flashes on... Can u help me please?

A: I was having the same issues...

Q: 5. Does it work with Canon EOS 80D ?

A: I DON'T KNOW, AS I DON'T HAVE THAT CAMERA.

Q: 6. will RC-6 remote work with 1ds mark III?

A: No, the Canon RC-6 Wireless Remote Control is not compatible for use with the Canon EOS 1Ds Mark III DSLR camera.

Q: 7. Is it compatible with a eos m10

A: Yes, this remote is compatible with the Canon EOS M10.

Q: 8. Does this work for Canon 5D (non Mark II or III) just a regular 5D?

A: yes

Q: 9. Is this remote compatible with 7D Mark ll?

A: The remote is compatible with the Canon 7Dii.

Q: 10. Will this remote, make sure that I am in focus before shot is fired? I do a lot of self-portraits and want to make sure that this gadget will only fire when I am in focus before it goes off.

A: If your camera is set to One-Shot AF, when you press the shutter button on the Canon RC-6 Remote Control, the camera will first focus on the item on the focusing point chosen inside the camera's viewfinder, then it will release the shutter. It does not have a half-press function similar to the shutter button on the camera, so the camera will first focus, then capture the image as soon as the button is pressed (unless the remote is set to 2-Sec. Delay). If the camera is set to AF-C or AF-A focus modes, it is possible the camera will release the shutter without focusing, which is why One-Shot AF is recommended when using the Canon RC-6 for self-portrait usage needs.