Remotely control power to two pieces of equipment with the Lowell Manufacturing RPC-20-CD Remote Power Control. It plugs into one 125 VAC socket and provides two outlets that can be powered on and off by your control system. Indicator LEDs and a test switch help you quickly check the status of your setup.

Two Remotely Controllable Outlets    Test Switch and Indicator LEDs    125 VAC, 60 Hz, 20A Power Rating    6' Cord with NEMA 5-20P Plug

Related Questions and Answers

Q: 1. is this remote release a good match with d5100 Nikon?

A: I believe it would, Its a perfect match for my D750

Q: 2. Does it work on a Nikon D750 in combination with Really Right Stuff L-Plate in vertical camera position?

A: Yes it works well.

Q: 3. Does it work with the D500?

A: According to Nikon - the MC30 and MC30A are the remotes for the D500

Q: 4. will this Nikon MC-DC2 work with Nikon Z6II?

A: Yes, the Nikon MC-DC2 Remote Release Cord is compatible with the Nikon Z6 II Mirrorless Camera.

Q: 5. Can the infrared shutter release be set for continuous use, instead of one shot only?

A: The Nikon MC-DC2 Remote Release Cord is not an infrared remote release; it is designed to be plugged into the MC-DC2 terminal on the side of compatible Nikon DSLR cameras. If you have an inquiry concerning a particular remote, I would recommend sending an e-mail with the full brand/model of the remote in question, as well as the brand/model of the camera with which you will use the remote to prophoto@bhphotovideo.com and we could then assist you with your inquiry.

Q: 6. Will this MC-DC2 work on Nikon D700 Camera?

A: It works on both my Nikon D7200 and D5100, best I can tell you.

Q: 7. work with nikon 5300?

A: I checked Nikon's website, and this cable release does work with your D5300. I have the D7200, and this accessory has been a must-have. Love it!!

Q: 8. Does this product work if trying to record in video mode, or it it only for pics?

A: My Nikon D610 also has Assign Shutter Button so it should work. (Thank you Nathan R. for that tip. This was a menu item I'd never noticed)

Q: 9. Are there any longer release cords than this that are comparable with the same cameras?

A: The wired remotes are not that long and the extensions available are not designed for that connection.The only option that is really available is a wireless one.There are a few different ones listed below.

Q: 10. Does it work with Nikon D850?

A: No. The correct cord for a D850 would be the MC-36/MC-36A Multi-Function Remote Control Cord (uses the 10 pin connector).