Extend your HDMI 4K video signal over a longer distance with the 4K HDR HDMI Receiver with RS-232 & IR over HDBaseT from Kramer. The receiver is capable of extending standard compression 4K30 4:4:4/HDR (or high-compression 4K60) video signals up to 230' and extending standard compression 4K60 4:4:4 or 1080p60 signals over 130' with nearly zero latency. It is designed for use with a compatible transmitter in digital signage applications as well as sending HDMI signals in healthcare facilities, control rooms, educational facilities, gaming competitions, airports, and even in home theater installations.

The receiver is compatible with a separately available HDBaseT transmitter such as the Kramer TP-583T transmitter on the other end. It is compliant with HDCP 2.2 and EDID, enabling it to support multiple HDMI content sources, and it supports CEC (Consumer Electronics Control), bidirectional RS-232, and IR control. It supports Deep Color, lip sync, uncompressed embedded audio, Dolby TrueHD, and DTS-HD. Included with the receiver is a mounting bracket and a power adapter.

Extend HDMI Video over HDBaseT    Extend 4K30 4:4:4 HDMI Video up to 230'    Extend 4K60 4:4:4 HDMI Video up to 130'    HDCP 2.2 and EDID Compliant    Data Rate up to 18 Gb/s    Supports CEC/IR/RS-232 Pass-Through    Dolby TrueHD & DTS Master Audio Ready    Supports Uncompressed LPCM Audio    1 x 3.5mm Jack for IR    LED Indicator Lights & Mounting Bracket

Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. It employs low-level video compression technology that delivers visually lossless performance for 4K60 4:4:4 and HDR signals with near-zero latency. This high-quality compressed signal is extended to almost double the extension reach of the

uncompressed signal.

The TP-583R is a standard HDBaseT extender, backwards compatible with other standard HDBaseT extenders. It extends either compressed or uncompressed HDBaseT signal, by auto-adapting to the compression capabilities of its connected extender. This enables it to be connected to any market-available HDBaseT-compliant extension product.

Automatically detects a standard HDBaseT extender without compression and disables the compression to extend the signal in compliance with the detected extender.

HDR HDCP 2.2 compliant. Supports Deep Color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display.

Intelligent EDID pass-through algorithm that ensures plug-and-play operation for HDMI source and display systems.

Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.

Serial interface data flows in both directions, allowing data transmission and device control.

IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.

Status LED indicators for HDMI and HDBaseT ports facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS-232 connection ensures lasting, field-proven deployment.

Compact DigiTOOLS fanless enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1 RU rack space with the recommended rack adapter.

Related Questions and Answers

Q: 1. Is this monitor's color reproduction good enough to grade on? Looks like it could be a good mobile solution for this..?

A: no it is NOT this is not a reference level monitor and would not be suitable for colour grading

Q: 2. Approximately how many hours will it run using a V-Mount 160watt Battery?

A: The Elvid StudioVision 4K HDMI Monitor with HDR should last almost two hours with a 98Wh battery.

Q: 3. Can the Nucleus Nano II FIZ controller connect to this device to control a dji focus motor?

A: No, the Tilta Wireless/Wired Control Receiver Module for RS 2 is designed to be used with the Tilta Remote Control Handle for Advanced Ring Grip for RS 2 and RS 3 Pro.

Q: 4. Does this monitor have any ability to tilt within the frame?

A: The Elvid StudioVision 4K HDMI Monitor with HDR is fixed in the case.

Q: 5. does this work with the rs3 pro?

A: Yes, the Tilta Wireless/Wired Control Receiver Module for RS 2 is compatible with the DJI RS 3 Pro.

Q: 6. Can this monitor supply power to the Shimbol TP Mini 600' HDMI Wireless Video Transmission System?

A: The Shimbol M5 5.5" 3D LUT 4K HDMI HDR Touchscreen Monitor does not supply any power output. It would be recommended to use L Series style batteries such as the Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit, BH #GENPF770CS, to power the Shimbol TP Mini 600' HDMI Wireless Video Transmission System.

Q: 7. How do you assign custom functions to the function keys?

A: As noted in the manual, under page 9: https://bit.ly/2Vojsx3 To reassign menus to the function buttons, follow these steps: 1. Press and hold the function button until the function select menu appears on-screen. 2. Use the navigation buttons to select the desired function, and press menu to set the change and return to the main view. Press Exit before you accept the change with the Menu button will cancel the action and revert to the previous setting.

Q: 8. Will this work with an existing dual-handle nato rig such as the Tilta Dual Handle or the Small Rig Dual Handle? Or does it block the Nato ports on the side of the Gimbal?

A: The Tilta Wireless Control Receiver Module for RS 2 will not work with the SmallRig Dual Handgrip for DJI RS 2/RSC 2 Gimbal but will work with the Tilta Dual Handle Power Supply Bracket.

Q: 9. Hi. Just wondering if this can simultaneously have a v mount plate and a VESA plate attached for a stand? Can you run it off of a v mount battery and attach it to a stand via VESA at the same time, or do you have to pick one or the other?

A: In order to use a VESA plate, the V mount battery module must be removed. You can power the monitor by v-mount battery with a 12v 4-pin XLR to d-tap cable.

Q: 10. Can I remotely turn on the rs2 with this? I am trying to hang the gimbal and it will be out of reach. Will this allow me to remotely power on the gimbal?

A: No, the Tilta Wireless Control Receiver Module for RS 2 will not allow you to remotely power the DJI RS 2 on or off.