The 1 RU Rackmount Panel from Lowell Manufacturing features nine 15A power outlets including one unswitched in the front, two unswitched in the rear, and six switched in the rear. A four-step sequencer is featured as well. This rackmount panel is ETL listed and has a power rating of 120 VAC at 60 Hz, 15 A with EMI/RFI filtering. A front rocker switch sequentially activates and deactivates equipment connected to the "switched" rear outlets in four steps. The sequence delay between steps is between 0.5 to 10 seconds, and is screwdriver adjustable. This panel has a 9' cord with a NEMA 5-15P plug.

120 VAC Power Rating    Front Rocker Switch (On/Off)    One Front, Two Rear Unswitched Outlets    Six Rear Switched Outlets    Four-Step Sequencer    Sequence Delay Between 0.5 to 10 Seconds    9' Cord with NEMA 5-15P Plug    Color Coded LED Status Indicators    Two Rear Terminal Blocks    Made in USA

Steel chassis with black finish

Color coded LED status indicators

Rocker activation switch on front (on/off)

One front and two rear unswitched outlets are always on

Six rear switched outlets are activated by an on/off switch

Rear terminal block for connection to optional remote switches (momentary)

Rear terminal block to allow system switches to be overridden for life safety system applications where fire code mandates an alarm interface

ETL listed in the US and Canada, UL Standard 60065

Made in the USA

Related Questions and Answers

Q: 1. Can sliding rack rails be attached to the Zoom RKL-12?

A: The Zoom RKL-12 is not designed for use with sliding rack rails.

Q: 2. Can this monobath be used to develope Kentmere Pan 400?

A: Film Photography Project Super Monobath One-Step BW Developer (1 Liter) has not been tested with Kentmere Pan 400. The manufacture recommends in Kentmere the100, not 400.

Q: 3. Will it fit the zoom livetrak l-8?

A: No, the Zoom RKL-12 Rackmount Adapter is intended for use with the Zoom LiveTrak L-12 and L-20 Digital Consoles. It is not intended for use with the Zoom LiveTrak L-8 Portable Digital Mixer.

Q: 4. Is there a RCA jack for turntable?

A: No, the CD200BT only has RCA outputs. The Aux input is a 3.5mm jack designed for inputting devices (i.e. phones, computers, iPads, etc.) using the devices headphone output. For a turntable, you need a receiver that has a turntable input (this has a special preamp for the turntable) or an external turntable preamp that will then allow you to plug into any receiver that does not have a dedicated turntable input.

Q: 5. Is there an adapter for the slider for the 100m head yet?

A: We expect the adapter to launch some time in August.

Q: 6. To attach this to a Dana Dolly, do I need the 'Dana Dolly 75mm Adapter for Sachtler aktiv6, 8 & 8T' (BH #DAKTIV75A) OR 'Sachtler aktiv Bowl Connector for 75mm Tripod (V2)' (B&H # SAABC75V2)?

A: To attach this to the Dana Dolly you will need the 75mm adapter for Sachtler aktiv6, 8 & 8T (#DAKTIV75A). You don't need the Sachtler aktiv Bowl Connector because one comes with the aktiv8 head.

Q: 7. Is this compatible with the original flowtech legs?

A: Yes it is. As long as the legs are 75mm bowl this head will work.

Q: 8. Can the L20 be mounted in either direction in this rack? For my application I need the deep part of the rack at the top of the mixer.

A: You can mount the Zoom RKL-12 Rackmount Adapter for LiveTrak L-12 and L-20 Digital Consoles so that the taller side of the Zoom LiveTrak L-20 Digital Mixer & Multitrack Recorder is either on the top or the bottom.

Q: 9. Is this compatible with the dana dolly? If so, what adapter should I get?

A: Yes it is compatible with Dana Dollies. This head includes everything you need to set it up with standard 100mm Bowls.

Q: 10. Will this work with the Sachtler HOT-POD 14 (BH #SAHPCF14)?

A: Yes, The Sachtler HOT-POD 14 has a 100mm bowl fitting that will work perfectly with the Sachtler aktiv10 Sideload Fluid Head.